Question about LG Washing Machines

1 Answer

LG intellowasher wd-8015c. it starts, water goes in, then as it's about to start the washing cycle it stops, beeps a few times and the temperature panel flashes and doesn't go further. we are able to use the pump cycle to drain the water and get the clothes out. we've also drained it manually from the filter at the bottom. we've tried it on all different cycles and the same problem occurs. - HELP!!!!!!.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • LG Master
  • 2,160 Answers

Sounds like a bad thermistor

Posted on Jul 19, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2920 Answers

SOURCE: Does anyone know where i

any appliance shop or store carries them

Posted on Oct 12, 2008

  • 4088 Answers

SOURCE: LG front Loader Intellowasher 7kg WD-8015c has

If this has a mechanical timer, the clock drive gears may have a damaged tooth or a piece of debris is blocking further turning of the dial. If electronic, the control unit should be replaced.

Posted on Sep 18, 2009

  • 343 Answers

SOURCE: hello. I have an LG intellowasher front loader

If you've waited the normal time for the interlock to allow the door to open and it's still locked, the interlock switch itself is probably faulty. Tricky job. Best to find a repair technician........Nomess

Posted on Apr 18, 2010

jumptrout51
  • 3361 Answers

SOURCE: Manual for LG Intellowasher 7kg

While not exact to your model,this manual may answer your questions.

http://136.166.4.200/contents/Laundry/WD-1070FH/WD-1070FD_Service_Manual.pdf

Posted on Sep 08, 2010

sonicboomele
  • 1557 Answers

SOURCE: i have a lg intellowasher 7kg wd-8015c (front

the water pump is sending a signal to the pcb telling it there is a fault clean the filters and wheel on the water pump

let me know how you went

sonic boom electronics

Posted on Dec 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG intellowasher 7kg wd-8015c


SURE VINEGER IS VERY GOOD ON CLEANING WASHER

May 02, 2014 | Washing Machines

2 Answers

Lg intellowasher wd-8015c won't drain?


Most probably pump is blocked or the hose is blocked. Put drain hose lower or the blades are broken. It is not that hard to check if you know where the pump is and you can take it off without requiring special tools.

Aug 01, 2013 | Washing Machines

5 Answers

LG Intellowasher 7kg WD-14125RD shows DE error


DE is for a door lock error and you will need to replace the lock. Here is the part to order.

Dec 07, 2012 | LG WD-12126RD Front Load Washer / Dryer

1 Answer

LG Intellowasher 7kg wd-8015c leak


Most of the time it is the door seal, open the door and check all the way round. check the sump hose and pump, sometimes it can leak from the soap draw hose to the outer tub, but not in your case I think. In most cases this can be fixed easy and is the door seal. to find out if it is coming from the front or the back, just place some news paper on the floor under the machine and take a look to see if it is the front or the back. a door seal is about 15/25 pounds retail

Oct 24, 2012 | Washing Machines

2 Answers

LG Intellowasher (Model WD-1023C)


The water pump can be blocked and thus stop the machine from finishing the wash cycle. In front on the bottom there is as hatch that can be opened with a flat screwdriver, the small black rubber pipe can be used to first drain all the water before the opening the filter. Small objects such as coins coluld be found in here, blocking the pump. Clean the pump by removing these, optionally blowing into the outlet (yuck!), to dislodge anything. If that does not help to fix the problem, you can clean that actual water pump, but this requires you to use a screwdriver to remove the pump.

Tilt the machine on its side, the pump is attached with 3 self-tapping screws. (if you can't figure out what the pump is you should probably let a technician do this). The pump has 2 parts to it, take it apart carefully and clean out all the dirt that has accumulated in there. Plastic friendly, waterproof grease can be applied to the pump spindle and bearing if available.

If the problem still persists a new pump is available from LG at a reasonable cost.

Jul 30, 2010 | LG Washing Machines

2 Answers

Hello. I have an LG intellowasher front loader wd-8015c which has finished its cycle but the door will not open.... how can I get it to manually open? I have tried doing another rinse cycle and pumped out...


If you've waited the normal time for the interlock to allow the door to open and it's still locked, the interlock switch itself is probably faulty. Tricky job. Best to find a repair technician........Nomess

Apr 18, 2010 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...