Question about Dryers

1 Answer

Kenmore Elite dryer #11092832100 when I push to start I get 3 quick beeps and then nothing happens.

Posted by on

  • russ741 Jun 03, 2011

    Kevin,
    That was not the problem. I replaced the themodisc on the blower housing and it still didn't work.
    I traced the problem down to the door switch.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dryers Master
  • 1,902 Answers

Hello & Welcome to FixYa

If you have already tried cleaning the vent then the problem is with the Thermostat. When the thermostat goes bad it cannot be reset and replacing it is recommended repair.It is located on the blower wheel housing inside the rear panel to the exhaust duct. You can test it for continuity before replacing, if thermostat reads continuity then the problem is with the control board is bad and needs replacement. Please get back to me if you have any other questions.


Kevin

Posted on May 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Elite quiet pak 4 will not start. Close the door and hit the power button and nothing happens. Makes the beeping sound but nothing else.



Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101
//

Jan 02, 2011 | Kenmore Elite HE4 Electric Dryer

1 Answer

Our dryer beeps when start button pushed but nothing happens. Can you describe where fuse is?


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Aug 10, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Pushed a button but dryer does not start, can not push any other


Hi,
There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer2_bing.gif Repair ? The dryer will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101

May 12, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite HE4 gas dryer won't start


I had the same symptoms and it was a bad motor relay. This happened twice within 5 years.

Apr 19, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

My Kenmore Elite Smartheat Quietpak 4 will not start. F70 code


leave door open and press the rubber botton inside, \ I just hooked up mine and it did same thing, i pushed botton light went out, so this told me the door wasnt closing correctly, you have to push hard on door first couple times. hope this helps you.
dave

Feb 09, 2010 | Kenmore Elite HE4 Electric Dryer

2 Answers

New HE5t steam dryer will not turn on


What was wrong with your dryer? I am having that same problem?

Dec 27, 2008 | Kenmore Dryers

1 Answer

Kenmore Elite HE3 Dryer (3 yrs. old)


when u push the buttons do all lights light up if so ,, machine is in lock mode ,, press and hold the little icon that read lock for about 3 seconds unitll lights are off then run ,, let see

Nov 19, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore elite HE4 dryer 3 rapid beeps when pressing start button


the machine is in lock mode made for children in mind so that they do not touch any cycle while on,, look for lock icon hold 3 seconds and u will hear beep and that its it u r done ,,,,

Oct 20, 2008 | Kenmore Elite HE4 Electric Dryer

2 Answers

Dryer won't run


take a look at your start and door switch

May 24, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...