Question about Black & Decker 19" Electric Lawnhog Mulching Mower with Rear Bag

1 Answer

Need to reassemble the on-off switch

Need an exploded view of on-off switch assembly

Posted by on

  • bifrostbear Sep 01, 2008

    I don't have a diagram of it, but I just repaired mine today - a small black plastic post that holds the orange on/off lever in place snapped. I went to Ace hardware and bought a metal spacer for .28 - I then drilled out the place where the old post had snapped to hold the spacer on the one end (the other end fits the preexisting spot for the old plastic post). The orange lever is pretty easy to reattach - the end has a hole that a metal bar hooks up to (this is what turns the switch on and off) and then there is a spring that fits around the (replaced) pole with a hook on one end that faces towards the end of the handle (there is a slot underneath one side of the handle where it rests) - this provides the tension to push the orange lever back when you release it.

    (This wasn't the cleverest way for black and decker to make this switch - it should have been a metal post in the first place - I haven't even used my mower for the whole season yet and it broke.)


1 Answer

See look for find it now icon
enter the model # & search

Posted on Aug 17, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need an exploded view of the PTO on my 1957 B250 I/H tractor

Not sure if this will help but it will at least put you in contact with people knowing that stuff - even has a manual search

International Farmall Tractors Discussion Forum

Dec 29, 2014 | Garden

1 Answer

Have craftsman 21 hp 42"cut

You can take the model number listed under the seat and go to search craftsman parts, go to the sears website and use that 917.# and you will be able to see an exploded view of the deck among other sections of the mower, all other sections except the engine.

I hope this helps.

Aug 17, 2011 | Garden

1 Answer

I need and exploded view page for a 18.5hp Intek Briggs and stratton engine

Get the model and type number off the engine and go to briggs website or you can go to another website such as partstree. On scroll to bottom of page and select briggs. On the left side of the next page enter model number followed by a space and the type number. If it does not take the model and type number (happens sometimes) enter just the model number and hit enter, then scroll down the page until you get to the right type number. There will be a list of the illustrated parts drawings for the engine. These are exploded views.

Hope you find what you need.

If this was really helpful for you please rate four thumbs up.

Jul 19, 2011 | Garden

1 Answer

I am looking for direction how a toro mower deck goes together. All the parts fell off and am trying to put them in the right order. It's a Model #78361.

You can go to , enter your make and model number and get a picture of the deck assembly in an exploded view showing you where everything goes

Oct 31, 2009 | Garden

1 Answer

Craftsman riding lawn mower steering shaft fell. Mower will not steer. I just started mowing, and the mower quit steering. Looked underneath, and it appears the shaft came loose that is used to steer. Any...

Look under the seat of your tractor and note the complete Model number.
(usually begins with 917. _ _ _ _ _ _ )

Next, go to THIS PAGE and use the Model Number to find an exploded view of the steering components and how they assemble.

Hope this helps,

Oct 15, 2009 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

Briggs and stratton throttle/governor assembly

Hi you can look up an exploded view on a site called pats small engines it may bring some light to the subject.

Sep 04, 2009 | Garden

1 Answer

Need exploded view of engine and carborator

go to and put in your make & model #'s then click engine assembly.hope this helps

Jul 07, 2009 | Mtd Garden

1 Answer

Need parts manual for Craftsman 22HP 50 inch deck lawn tractor

Go to "", have your model number ready and go to the parts link. You will beable to view an exploded view of your mower and order parts on line if you like.
Hope this fixes your question, let me know.

Jun 12, 2009 | Garden

Not finding what you are looking for?
Black & Decker 19" Electric Lawnhog Mulching Mower with Rear Bag Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Garden Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers


Level 3 Expert

479 Answers

Tim Whalen

Level 3 Expert

3069 Answers

Are you a Black & Decker Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides