Question about Olympus Digital Cameras

1 Answer

E520, fn button can not be set to "face detect", and can not reset to factory settings

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 919 Answers

In Auto mode this is true. If you turn the camera dial to P you will be able to reset the camera to factory settings and set the fN button to be face detect. In Auto the camera is already using the factory default settings for the camera.

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello. How can I reset Panasonic Lumix DMC-TZ60 to factory default? (Can I reset software and hardware?) Thank you for answer


Resetting by 'Software'
Resetting to the Factory Default Settings from the interface:
  1. Go to the interface of your camera by typing in the camera's IP address in the browser. Example: http://192.168.1.253/
  2. Click Setup, Maintenance, Default Reset, Reset to default and then click Execute.
Resetting by 'Hardware' Resetting to the Factory Default Settings using the Control button:
  1. Disconnect the 'DC IN' cable from the camera.
  2. Hold down the 'Initial Set' button.
  3. Reconnect the power adapter using the 'DC IN' jack while holding down the 'Initial Set' button. Release the 'Initial Set' button after 5 seconds. (The reset could take up to 180 seconds)
  4. When the 'Status' indicator changes to green, the process is completed and the camera had a Factory Default Reset.
http://electronicshelponline.blogspot.com/

Sep 11, 2016 | Panasonic Digital Cameras

1 Answer

I have a SL102 and the face detection will not move from the off position, is there a way to reset it?


First: not in every mode Face detection will work. It could be you only see the bracets the camera will focus on.

to set it up:
Press the menu button in an available mode.
Press Up/Down button to select the [Functions} menu
Then press Right/OK button
Select Face detection by pressing the up / down button and press OK

Samsung has your manual online available. Just google for it.

Oct 27, 2013 | Samsung SL102 Digital Camera

2 Answers

I have a Canon PowerShot A430 camera. When I turn it on, the lens doesn't open and it shuts off. The message on the screen says " Lens error, restart camera." Please advise. Thanks


Hi,

The Lens Error is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.
Performing a manual power reset
Turn off the camera.
Remove the battery pack.
Press and hold the power button for 30 seconds.
Allow the camera to remain without power for 60 seconds.
Reinsert the battery pack.
Turn on the camera.
You can reset the Camera back to factory default by performing the following steps:
Press the power button.
Press and hold the MENU button for more than 5 seconds. Default Settings will get displayed.
Use the arrow buttons to select OK and press the FUNC./SET button. This will reset all the settings back to factory deafult.
This should resolve the issue. If the issue persists, service may be required.

Thanks for contacting FixYa

Aug 10, 2011 | Canon PowerShot SD500 / IXUS 700 Digital...

1 Answer

My Cyber Shot DSC W55 when i open it the lens keeps moving forward and backward and then something shows on the screen which says First "ACCESS" then the next one is "Turn The power off and...


Hi,


Error: TURN THE POWER OFF AND ON AGAIN or Access is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa.

Feb 24, 2011 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

I'm having trouble with my olympus E420. When i set the dial to "A" or "S" and press the shutter button, the camera does not take a picture immediately, but after about 1 min.


I had this problem also and I called the Olympus helpdesk. You will need to reset your camera to factory reset and that will solve the issue...

Oct 30, 2010 | Olympus E-420 Digital Camera

1 Answer

Reset the date and time to original factory settings


Hi,
Please follow the steps below to reset the setting to default...

1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the arrowrightbutton.gifbutton, highlight the yellow setup_icon.gif(Set up) tab. sx200resetscreen.jpg 3. Using the arrowdownbutton.gif button, select [Reset All..] and press funcseticon.gif. sx200menudirection.jpg 4. Select [OK] and press funcseticon.gif. sx200resetconfirm.jpg
note.gif
  • Settings cannot be reset when the camera is connected to a computer or to a printer.
  • The following cannot be reset:
    • Shooting mode
    • The [Date/Time], [Language] and [Video System] options in the setup_icon.gif(Set up) menu
    • White balance data recorded with the custom white balance function
    • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
    • Newly added My Camera settings

Feb 19, 2010 | Canon PowerShot SX 200 IS Digital Camera

1 Answer

Can i reset the settings to the original factory settings?


In order to reset the camera settings to its default values you need to do the following:

-Press the MENU button
-Use the left or right arrow keys to select the Settings menu (its icon looks like a wrench and hammer)
-Use the up or down arrow keys to scroll to the choice that says "Reset ALL..."
-Press the "Func./Set" button to confirm your choice.

This will reset the camera to its factory default settings.

Jul 14, 2009 | Canon IXUS 80 IS Digital Camera

1 Answer

Stuck in face detection mode


Take cover off of camera. Set it face up and look directly under the zoom/capture button, there should be an slim orange wire(about a quarter inch wide) with a small black pad on the top of it. Disconnect this by pulling it up(it kind of sounds like velcro), then wait a minute and reconnect it. And it should work fine!

I'm no expert, I just took mine apart and messed with it, I think it just resets the internal memory.

Good Luck

Mar 19, 2009 | Kodak EasyShare M1033 Digital Camera

2 Answers

Help me desperatly


reset the factory settings...and replace the cells.....sud be wrking fyn after resetting to default factory settings..

Apr 27, 2008 | Fuji FinePix A330 Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Digital Cameras Experts

kakima

Level 3 Expert

96738 Answers

Willem.
Willem.

Level 2 Expert

345 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Olympus Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...