I just washed the car seat and I'm not sure how the 5 point harness goes back together.
Got a front facing carseat the # on it is 02524AAR Made 01/26/2000
Washed car seat cover and need directions to re-install 5 point harness. child weighs 22 # and is 3 years old. Front facing seat #02-880-MBP. Manufacure # HB3A
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: can't put back together
Do you have a company name for this product? Graco, Cosco? If you do I can look up an online manual for you as there is most likely a diagram to make my description easier for you to visualize. At any rate you need to insert 2 of the straps (the ones with the pieces to snap into the buckle at the **** ) through the back side (aline your child with the slots to ensure correct placement. You want the belt to come out just above the shoulder) DId you take this completely apart to wash? If so you will need to slip on the chest buckle pieces as well. Hope this helps. I can help better if you are able to get back with the company name so I can get the manual for you. :)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Due to the safety implications of the carseat harness being incorrectly fitted if the harness has been completely removed from the carseat shell it would need to be sent to engineers for them to re-fit the harness. What country are you in we can direct you to the appropriate customer care team to arrange this.
Hi Beth - First open the footmuff, and set the carseat down on the floor in front of you so you're facing it. Take the harness pads and ****** pad off the harness straps and place the footmuff into the carseat. Pull the harness straps through the holes in the footmuff and press the back of the footmuff into the curve of the carseat. Replace the harness pads. You're ready to go! When you use the carseat, simply put baby in and do up the harness as usual, then do up the footmuff for cosy, safe travelling.
contact cosco as they are the manufacture, this attached link will give you a site that with the model number and manufacture date you can download the manual which will tell you how to put it back together
ok I had such a hard time with this, i looked on the internet for hours and found NOTHING!! haha so i went to babies r us and checked out a similar one so here it is. first the strap goes on the bottom, pull them even and the add the buckle, plastic buckle thing, and the other thing soft thing. then put the strap through the back of the seat (you should have two ends) not the must go OVER the adjusts! now take the metal piece that adjust the length and pull it long enough for it to reach the two straps and hook them up!! haha if this isnt good enough go to a store that carries the alpha omega elite car seats and check it out! GOOD LUCK!!