Question about Minolta EP1030/1030F CS/PRO Copier

2 Answers

Minolta 1030 My Minolta 1030 b/w copier is printing several vertical lines down the right side of the copy. What does this usually mean? Is the drum going bad?

Posted by on

  • michmccoydc Feb 03, 2009

    The copy quality on my Minolta 1030 is slowly deteriorating. This includes a stripe of black going vertically, on the edge, of my copies. The machine works fine otherwise and has done 35K copies.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 417 Answers

Depends if the lines go across the page as if the paper comes out or if they go down the page. If across then poss drum, transfer, or fuser unit, If down the page could be a short on the charge then poss only drum unit.

Thanks Jason

Posted on Aug 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ecrie probleme j3

Posted on Nov 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ep 1030/1031F gets black strip down side of paper about an inch wide


Odds are you need a new drum cleaning blade. The only problem is trying to find parts for the copier. Good Luck

Mar 31, 2013 | Minolta EP1030/1030F CS/PRO Copier

1 Answer

I have black lines on my copies that go from top to bottom. The copier is a Minolta 1030.


this can be an issue with the following check the comb electrode this is also know as the charge grid is it dirty damaged clean this unit replace comb electrode if damaged is the cleaning blade dirty is the drum being cleaned correctly by the cleaning blade is the drum past its life replace are the mirrors dirty clean them
the above will resolve your issue

Jan 25, 2011 | Minolta EP1030/1030F CS/PRO Copier

1 Answer

My minolta ep 1030 is printing copies with a line down the page


Check the hot roller for a scratched surface. Otherwise you may have a bad photoconductor.

Jan 07, 2011 | Minolta EP1030/1030F CS/PRO Copier

1 Answer

There is a dark vertical line of toner on prints


Common problem. Most likely caused by a bad drum cleaning blade. This is especially true if you run say 10 copies and the last copy out of the machine is worse than the first copy out. Drum cleaning blades are cheap at less than $30.00.
Good Luck and Thank You using Fixya.

Sep 24, 2010 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Konika Minolta Copier prints half dark pages


If it is only causing an image problem when you copy and not when you print, then there is something wrong with the optics under the glass. Check and see if you have any mirrors out of place or if the scanner looks crooked. If you have the machine set up to scan try and scan to SMB or email to see if it still has the problem. If everything looks correct under the glass and scans to SMB and email look bad like the copies, you may have a bad CCD assembly, or a bad board.

May 10, 2010 | Konica Minolta Office Equipment & Supplies

1 Answer

Vertical streaks when printing pictures


vertical lines on prints usually means either the drum's cleaning blade is not cleaning the drum (or the drum is damaged) or the fuser is scored. scored means that the protective coating on the fuser rollers is damaged. I would check the rollers on the fuser (the hot part of the printer right near the paper exit) for any lines on it, if you look at your prints, you should see them in the same location on the fuser. if you do not see any lines on the fuser rollers, then replace the drum.

May 24, 2009 | Dell Office Equipment & Supplies

1 Answer

What does ce 04 00 08 mean? I can get no response from my photocopier. It is a Minlota 1030 f. There is a lot of black lines down the paper when it was working so I am wondering if it has run out of ink???...


Copy counter display or drum life counter.Not appear one mail icon and arrow down?If yes it is a mantenance time,you ll be change IU (imagine unit)or developer ,OPC drum,2 collars,cleaning blade.

May 18, 2009 | Minolta EP1030/1030F CS/PRO Copier

1 Answer

Why does minolta copier print white stripes?


TRY TO CLEAN AND CHECK MAIN CHARGER AND TRANSFER CORONA FOR VOLTAGE LEAKAGE,AND CHECK DEVELOPER GEAR AND DEVELOPER DRIVE GEAR

Dec 03, 2008 | Minolta EP1030/1030F CS/PRO Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6117 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...