Question about Computers & Internet

1 Answer

Hi ,not got reboot cd for my packard bell imedia j2412 desktop,I have been through the menu's and tryed all differant things and its still not rebooting can i even tryed turning it on/off still no luck what can i do is they a free download cd i can get?

Posted by on

  • Alan Giles
    Alan Giles May 28, 2011

    Hi , Have you tryed lunching it in safe mode (F8)?
    Some system come with the reboot actuallty stored on the CD. As soon as the computer comes on press R if not try F12

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

At the boot screen you have options usually f12 will take you to recovery....then you will follow instructions to recover windows(this is not present on older pcs). If no recovery option then you will have to take it to a repair shop to reinstall windows.
don't forget to give testimonial and the votes 4 thumbs up if I helped.

Posted on May 29, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Packard bell imedia d3318 no vga signal


It is the video graphics card, or the motherboard, but you can sub out the ram memory one at a time as you test. It might be a bad stick of ram which would rule out the above mentioned

Apr 10, 2012 | Packard Bell iMedia Computers & Internet

2 Answers

I have an old packard bell pc and it needs to be rebooted but i haven't got the original floppy reboot disc how can i do it without the disc ?


By rebooted, I assume you mean reinstalled? You cannot reinstall a PC this old without the operating system disk. New PC's have a utility partition that contains the reinstall package. You will have to purchase that OS from ebay or some other site.

Jun 02, 2011 | Packard Bell iMedia 6826 (P481000502) PC...

1 Answer

I have a Packard Bell imedia J2412 Desktop, in the time I've had it I haven't cleaned out the insides and it looks pretty dusty. But I can't figure out how to open the case to clean it. There are 2 black...


Use the sliders till they are lapsed 100%, then pull (read "drag") that side of the case towards the back until an audible click, then pull it outwards.

Mar 22, 2011 | Computers & Internet

1 Answer

Need new master CD to work old desk top packard bell, I have CD's but do not work. Number on CD's are 6841210301 to 6841240301.


Packard Bell IMEDIA 5109 I assume ?

you would need to order them from packard bell, but why bother, Reinstall Your os and download all required drivers from

http://support.packardbell.com/uk/item/index.php?pn=P480410201&t=2006

Sep 10, 2009 | Packard Bell Computers & Internet

1 Answer

Packard bell pentium3 windows me


F1 is probably the key to enter the Bios setup utility. Press and hold the F1 key immediately after you start the machine. Go to the boot priority section, and set your CD-Rom as first boot device. Press f10 to save the settings and reboot with your recovery disk installed

Apr 29, 2009 | Packard Bell iMedia SL 9553 (P660401806)...

1 Answer

I have tried to upgrade my Packard Bell Imedia 1559 to 4 gigs from 1 gig of factory installed memory. However, the machine will not accept memory from Kingston or Transcend in any combination, and although...


I have read many posts about the PB Imedia and problems trying to upgrade memory. Sounds like there are some motherboard issues with this PC . Some have reported success with mixing different memory types and speeds, but no real answers as to why.

You may have to check the voltage that powers the memory. Some memory sticks are rated at 1.8v , others use other voltages that will hang your system if mixed.

Check with the manufacturer for their recommendation.

Aug 07, 2008 | Packard Bell Computers & Internet

1 Answer

Packard bell dest pot lost the facturies setting


have you tryed a diffrent screen? as i had similer problem didnt like crt screens only uses lcd

Jul 03, 2008 | Packard Bell iMedia 6826 (P481000502) PC...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...