Question about Whirlpool GBS277PDS Electric Single Oven

4 Answers

Cant figure out how to get back to farenheit temp..

I had a power surge several times a couple of nights ago and when my oven came back on the temp had changed from f to c degrees. I cant figure out how to get it back to farenheit. Also, my clock will not stay on now. Any suggestions? The timer does work but the clock wont stay on. After a power outage the temperature has changed from F to C and we cant seem to find a control that changes it. The clock also will not stay lit as it previouly has.

Posted by on

  • shereebickne Aug 16, 2008

    After a power surge last week, our oven only displays temps in celcius and I am at a loss as to how to get it back to farenheit. Our clock does not display the time now either.

  • shereebickne Aug 16, 2008

    Wow, so simple!! I appreciate your quick and specific response unlike the **** before you who just suggested that I change the settings!! DUH. Thanks again!!

×

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,029 Answers

to change between fahrenheit and celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To Change: Press and hold CUSTOM BROIL for 5 seconds. A
tone will sound and “C” will appear on the display. Repeat to
change back to Fahrenheit. To remove, press UPPER OFF,
LOWER OFF or OFF/CANCEL. you can click on the link for guide http://www.ajmadison.com/ajmadison/itemdocs/8300609.pdf

Posted on Aug 16, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,800 Answers

Give it a soft reset its in the display menu its sometimes referd asto factory defaults or restore inintial settings seek for that in ur menu and apply it and be sure that everything is just gonna be okay rate me as usefull if this not work good
and i will give another solution that give it a hard reset

Posted on Aug 16, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,318 Answers

Click here to download the user's guide and go to page # 7 to change from C to F.

Posted on Aug 16, 2008

  • Jaime Hernandez Aug 16, 2008

    Did you see the link I sent you?

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 230 Answers

Try to change the settings

Posted on Aug 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Riello 40 gasG900 burner that will ignite but when oven reaches temperature it turns off completely. After temp drops by 4 degrees it turns back on and reheats back to temp then turns off.Why is this?


that would be normal. if it didnt shut off, it would go above the set temperature. the heat is either off or on. it cant me in the middle. it turns 'off' so that the temperature doesnt go too far above 250. when it senses the temperature falling too low below 250, it heats it up again.

Sep 03, 2017 | Ovens

1 Answer

Gas oven doesn't get hot enough


Good Morning Friend,

I understand that your Frigidaire oven will not heat to temperature if you set it to 350 degrees. I see that you have to set it to 450 degrees for it to heat up, and then turn it back down to the desired temperature. Please try resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power, set the clock and try setting the temperature to 350 degrees. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jul 08, 2014 | Frigidaire Ovens

1 Answer

We were without electricity for 2 daya following hurricane Irene. When power was restored, the oven display (time, temp, etc) did not come back on. The oven lights come on when the button is depressed. and...


Try turning off the circuit breaker to the oven for 30 min or so and then turn it back on. If it does not come back on the oven probably got a power surge and the control has been damaged. Hope that helps

Aug 30, 2011 | Whirlpool RBD305PD Electric Double Oven

1 Answer

I have a whirlpool accubake oven that is stuck on the celcius temperature and I don't have an owners manual and I need to reset it to farenheit. Please help!


Hello,
To switch it to Farenheit..press and hold the BROIL button for up to ten seconds and the display of the broil temp will change from 500 to F then push clear/off button...if later on it needs to be switched back to C do the same thing


GENE

Aug 28, 2011 | Whirlpool Ovens

1 Answer

When set to bake eg: 350 degrees the audio alarm will indicate it's reached temp but the oven is 50- 75 degrees lower. Must wait another 15 min for it to reach the proper temp. Have tried to adjust the off...


If you are monitoring the oven temperature with an analog style thermometer you may actually be ok, but seeing the thermometers slow reaction time.
Some newer ovens actually do pre-heat beep prior to reaching temp in an effort to conserve eelectricity.
A good home test is to try your oven at several different temps to see if there is any variation in internal temperature. Try it one day on 300, the next at 375 and another day at 450. Give your analog style thermometer time to catch up (usually just about 15 min) and leave it on for a half an hour to see if the temp maintains.
Also Beware of aluminum foil AND THE NEW OVEN LINER MATS as they can alter oven performance bay absorbing and blocking the ovens natural heat radiation and convection air flow currents that happen in all ovens, not just convection models.
Another interesting fact is that older ovens used a thermostat in them that operated much like your thermometer and was very slow to react making the oven typically about 100 degrees hotter than where the customer set it. This was just a fact of life before the advent of electronic temperature management and became noticeable when people began trying to bake older "hand me down" recipes in the newer ovens with less than stellar results.
You can mimic the older oven performance by preheating the oven about a hundred degrees higher than called for and after it reaches temp, re-set it to the correct temperature and put the items in right away.
If you find your temperatures fluctuating ask your servicer to replace first the temp sensor and as a last resort the control board as this part is usually pretty expensive.
Good Luck with this!

Jun 14, 2010 | Ovens

1 Answer

Looking for toastmaster under counter toaster oven


I'm selling a couple on e-Bay. Oldradionut seller.

May 04, 2010 | Toastmaster RA-5T Electric Oven

1 Answer

My oven door will not unlock after cleaning


It will take some time for it to unlock. The lock after self cleaning is controlled by temp. The temps during self cleaning are over 900 degrees and after self cleaning it will take several hours before the oven lock will release. Don't try to force. If after 3 hours it has not unlocked you can try disconnecting power for 2 minutes then reconnecting to activate the self cleaning motor assembly. Good luck and thanks for using Fixya

Feb 23, 2010 | Kenmore Ovens

1 Answer

Temp control stopped working properly


replace the electronic control board.the power surge may have damaged the boards circuits.

Jan 29, 2010 | Maytag Appliances 27" Electric Double Wall...

2 Answers

Fan works, but Oven stays at 100 degrees. Tried


I had the same problem in December - I had to replace the circuit breaker and that solved the problem. My oven wouldn't go above 100 degrees in convection, bake and roast modes. Each of these modes are on a separate circuit so when one is bad, the others should work.

Jan 25, 2010 | Thermador C301U Electric Single Oven

1 Answer

KitchenAid gas range - Err message F5 E7 - cannot unlock door


Normally when storms hit your oven, the electronic control board goes out. That's what has happened to this oven.

Oct 24, 2009 | Ovens

Not finding what you are looking for?
Whirlpool GBS277PDS Electric Single Oven Logo

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

Sal DeAngelo

Level 3 Expert

2330 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...