My labtec webcam is not showing image after intallation

click start control panel view devices and printers you should see your webcam from there
if you are have trouble with your webcam
click start control panel administrive tools ,computer management ,device manager scroll down image devices you could see a yellow question mark?
right click to reinstall drivers or update driver
if you dont have the driver you will need to download one
http://download.cnet.com/labtec-webcam-pro/3000-18493_4-65583.html
hope this helps

click start control panel view devices and printers you should see your webcam from there
if you are have trouble with your webcam
click start control panel administrive tools ,computer management ,device manager scroll down image devices you could see a yellow question mark?
right click to reinstall drivers or update driver hope this helps
http://www.toggle.com/tag/labtec+drivers.htm
http://www.toggle.com/tag/labtec+web+camera+free+software.htm

1st You download Webcam Driver.
I intall may a4 tech
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Have you tried any software else for testing you webcam? Feel free to visit digitalsupporttech for getting help.

Try your cam here - hit "allow" in the top window and check your cam in the left window.
http://www.testmycam.com/
If the image is better here than on your computer uninstall the webcam software and download new software here
http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764
make sure its available before uninstalling.

I have Vista Home Premium, I can uninstall my webcam software and when I re-boot the computer it will search for software automatically.

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764 click the link above and select the model number of your webcam. thanks.

i lost my labtec software c.d,how can i intall my webcam now? following things are mentioned on its tag rating:5V-100mA M/N: V-UAE13, P/N 861169-0000, S/N LNA43902136 tell me what to do now, how i can install its software?

Normal 0 Double click on this site
http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764
to down load Labtec Camera Drivers.
Then
Disconnectthe Camera from the USB port and reinstall the CD or Downloaded softwareprogram. When the program asks you to connect the camera to theUSB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera’s have to besetup on the program they are to be used with. Just installing the cameraon your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order forthe Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Yourfriends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

Hopethis helps. Bud

Try downloading driver here.

Alternatively try here, but on this second website a free subscription is required.

Regards.

G.

http://www.labtec.com/index.cfm/service/listing/AMR/EN,crid=68,crid2=1764
go here
Sergio