Question about Office Equipment & Supplies

Open Question

Samsung ml- 1911 machine ml 191x25x Series. Red light appear. printer does not print from any location and sites.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

frcs68
  • 1605 Answers

SOURCE: Samsung ML-2510 Series: the error red light is blinking

reset the printer by opeing the front over and closing it again.
check all area for paper jam. i.e.: paper tray, ink cartridge, out put tray.

Posted on Apr 17, 2009

  • 2 Answers

SOURCE: Samsung printer ML 2510 series

Maybe the toner is low... According to the manual, a blinking red light:

• A minor error is occurring and
the printer is waiting for the error
to be cleared. When the problem
is cleared, the printer resumes
printing.
• The toner cartridge is low. Order
a new toner cartridge. You can
temporarily improve print quality
by redistributing the toner. See
page 8.3.
• The toner is totally exhausted.
Remove the old toner cartridge
and install a new one. See page
8.4.
• The toner cartridge reached the
end of its life.

Posted on Apr 18, 2009

xptareq2000
  • 1447 Answers

SOURCE: Samsung ML-1710p - error

It is problem your fussier unite may be thermostat or or lamp is fuse.If you are not a technician you go to a service center.Or you are a technician open it and clean thermostat and heater lamp check by ammo miter.

Posted on Nov 27, 2009

  • 1 Answer

SOURCE: Red light on all the time will not print

Depends which LED light is red. The upper one with two symbols is the error LED, while the lower one is the toner LED.

If it's the top LED, then it could be a number of issues, such as an open cover or some software problem. Could be an LSU error. Try updating the driver and firmware.

If it's the bottom LED, then your toner is probably finished (or has hit the 2100 mark). Try redistributing the toner by giving it a little jiggle, or just change the whole thing.

Posted on Jun 12, 2010

guyster7148
  • 192 Answers

SOURCE: The upper red light is

Look to see if there is a job sitting in the queue and delete it, then for good graces, unplug the machine and let sit for 20 minutes, it will assist in clearing the memory chip too, the plug in and it should be back to normal! please let me know if this does not tackle it, we can go from there. Take Care!! Guy :)

Posted on Sep 23, 2010

Testimonial: "Guy you're my main man! It worked and i'll be able to print my paper and stay out of trouble, i'm very greatfull, thanks a lot!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ml-2165w laser black printer, when try to print it tells me me disconnect and press on button, the light turns green then blicks then turns red. What do I do>


Dear
There may be some error related to fuser or LSU.
Pl. down load samsung easy printer manager from samsung site or it can found on the disk provided.
run it it show the error detail.
Thanks

Oct 06, 2014 | Samsung ml-2165w - laser printer -...

Tip

Solution to red light after refill Samsung ML 1540


Samsung printers such as ML 1640,ML 2245 and SCX 4300 have a toner page count embedded in their firmware. This is the reason that once you refill your toner after it has run out,the printer still doesnt print and says toner is exhausted. After you've refilled the cartridge,you'll have to reset the toner count also to zero...to do this,download the firmware here. ML 1640 Ml 2245 and SCX 4300 are not available on Samsung support site. You will need to google it and you may find it in torrents.

run it and it will reset your toner count to 0...you have to do this everytime you refill your toner.
Another solution is to open the backside of ML 1640 and ML 2245,locate the chip 93c66 and short pin numbers 1 and 4 and turn on the printer for a second.It only works in some cases though.

on Sep 01, 2009 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

Samsung ML-191x 252x Series. manual


avlbl on foll link:

www.samsung.com/in/support/model/ML-1911/XIP

Jul 04, 2014 | Samsung ML Office Equipment & Supplies

1 Answer

My Samsung ML-191x 252x Series printer has a orange light, what does that mean? Also it's not printing and making weird noises.


orange light means that one of the printer cartridge is getting finished. The time it gets red that menas its totally empty.

Jan 31, 2013 | Samsung ML-2510 Laser Printer

4 Answers

My Samsung ML - 191x 252x Series printer has a red light, does that mean I need to replace the toner cartridge? And if so, do I have to do it immediately, or does it still have some ink left?


Hi guys, The solutionto your problem is simple, just press the button just above the on/off buttonto print out the start of the printer. Make sure to see the "Toner Remaining" .

May 24, 2010 | Samsung ML-2510 Laser Printer

4 Answers

I have a samsung ml 2851 nd that won't print, and says the toner cartridge is low - I replaced with cartridge 209 (which office max said would work) and it still flashes the red light and says there is...


The counter needs to be reset most likely. I can\t locate a reset code & steps for you. Try calling samsung and ask about the toner reset you replaced the cartridge and its still showing the count from the old cartridge.


Apr 23, 2009 | Samsung ML-2851ND Laser Printer

1 Answer

Samsung printer ML 2510 series


Maybe the toner is low... According to the manual, a blinking red light:

• A minor error is occurring and
the printer is waiting for the error
to be cleared. When the problem
is cleared, the printer resumes
printing.
• The toner cartridge is low. Order
a new toner cartridge. You can
temporarily improve print quality
by redistributing the toner. See
page 8.3.
• The toner is totally exhausted.
Remove the old toner cartridge
and install a new one. See page
8.4.
• The toner cartridge reached the
end of its life.

Feb 24, 2009 | Samsung ML-2510 Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...