Question about Dynex DX-L32-10A 32" LCD HDTV

2 Answers

I have a dynex tv model number dx-L32-10a and the channels are going up really fast as soon as i turn the tv on and it will not stop! how do i fix it or is there a list of places that can repair it?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

Input will not change from tv to any other selection,input blocked

Posted on Sep 25, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 88 Answers

Take the batteries out of the remote, sounds stupid and obvious but its worth mentioning. If that doesn't stop it, try wiggling the CH UP button on the side of the TV to see if it is stuck in the depressed position.

If this fails there is probably an electrical short on the buttons on the side of the TV. Check to see if your in warranty or best buy protection plan coverage still. If not, see if you can have a local repair shop just disconnect the button panel and just rely on the remote. (not many people use those buttons anyway).

Posted on Jun 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Finally bought anRCA antenna for my new Dynex TV.Nothing no signal,no way to scan for channels I can see.AGGH.Is it a lemon?


Which Dynex TV do you have? The manuals for most Dynex TVs are available from the product page. Start at http://www.dynexproducts.com/products/televisions.html . If you have an older Dynex that isn't on the main list, check under Discontinued Products. Alternatively search for your model. Then click on the Support tab to find the manual for that model.

For at least one Dynex TV (DX-32L152A11), the procedure to scan for channels is below.
To scan for channels, first make sure that the current input is set to TV. (Press the input button on the TV or the remote). Then press Menu and use the left/right arrows to select TV. Then press Enter or down arrow (the manual says the right arrow). Use the up/down arrows to select the entry to change. First, make sure that the Tuner Mode (first item) is set to Air (use the left/right arrows to change this). Press Menu to go back to the TV menu. Then go down to Channel Scan and press Enter. You may need to confirm the channel scan and press Enter again. Wait for the scan to be completed.

On a discontinued model (DX-32L151A11), the procedure is slightly different. With the input set to TV, press Menu. Select the Channel submenu and press Enter or down arrow. Set the TV mode to Antenna (use the left/right arrows to change the value). Then press the up/down arrows to reach AutoScan. Press Enter. Move cursor to highlight Yes and press Enter again. Wait for the scan to be completed.

I hope this helps.

Cindy Wells
(There were some Dynex monitors built. They usually do not have a coaxial antenna in port since they didn't have tuners.)

Jul 29, 2011 | Olevia LT32HVE 32 in. LCD Television

1 Answer

I turn on my DYNEX LCD-TV model DX-L26-10A and the screen says 'Please Wait" for a few seconds and then I hear the voices for the channel, but there is no picture and there is a buzzing sound coming...


I turn on my DYNEX LCD-TV model DX-L26-10A and the screen says 'Please Wait" for a few seconds and then I hear the voices for the channel, but there is no picture and there is a buzzing sound coming from the back of the unit.

Nov 15, 2010 | Dynex 32 in. LCD Flat-Panel HDTV

2 Answers

Dynex DX-LCD37: Missing cable channels caused by bad tv tuners?


That "Tech" is full of hot air, I have never heard of such rubbish! http://www.hdtvreview.com/pdf/dynex-dx-lcd37-09-02-manual.pdf
Above is your manual. have a look for your self. Now IF you can do Picture in Picture, then technically, there are TWO tuners, BUT one cannot work, and the other not, I do NOT know what that Tech is on about I suspect he is BSing you... If channels are Blocked, then it is maybe something wrong with the cable, or the strength of the signal, or something else, But there are NO "Tuners" that are going faulty, this is NOT how a TV receiver works.

Does this Dynex model have multiple tuners: NO If so, can they go bad : Yes, as could any electronic bit. maybe the ONLY tuner has faulted, but I don't think so. Tuners usually work, or don't. but still may pay to take to a professional and ask them to check the tuner?
Are the tuners replaceable: YES.
will the rest of the tuners eventually go out and I will end up replacing the TV:. NO, well depending if there is any fault, maybe.
Again I have never heard such BS, EVER.


Apr 08, 2010 | Dynex DX-LCD37 TV

1 Answer

Dynex TV losing favorite channels


Try changing the batteries in your remote. If the batteries are weak they may not be sending strong enough signals to the TV thus sending different signals than you meant.

Jan 24, 2010 | Dynex DX-L19-10A LCD TV

1 Answer

Watching Analog channels, getting slight twitch, what can i do?


If you television is till under warranty have a service person check it out. you may have a minor problem with the video locking circuits. This may be a simple repair of fixing cold solder joints. You should not get loss of signal. This usually happens when the connectors are not properly aligned with the connections. This can also happen with the cable not keeping a steady input voltage to the television. You can call the Dynex customer service at this telephone number 1-800-305-2204 between the hours of 7am-12am CST. Give them a call and ask them if this is a known problem with your type of set-up they may have a fix for it. You can also go to the customer service web site at.(http://www.dynexproducts.com/pc-696-23-dynex-42-1080p-flat-panel-lcd-hdtv.aspx) You can use the customer service e-mail service to talk to the service people. Give them the model number of your television and the problem you are having with the random loss of video signal. They should be able to help you with the repair. I hope this information helps you with your problem.

Apr 25, 2009 | Dynex DX-LCD37 TV

1 Answer

Broke a brand new TV screen dynex dx lcd32 09 Does anyone know how to buy a replacement screen


Try ebay look up the model number on there useing advanced search you just might find one.. Good luck.

Apr 22, 2009 | Dynex DX-LCD32-09 LCD TV

2 Answers

I have a Dynex DX-LCD19-09


You can go to the Dynex customer support website at (http://www.dynexproducts.com/pc-694-23-dynex-19-720p-widescreen-flat-panel-lcd-hdtv.aspx)This is the support page for you model television. Just copy the address and paste it into the address bar of you web browser. The page has a pdf copy of the manual that you can copy. It also has access to the customer support technical service using the e-mail support. You can also call Dynex customer support at this telephone number 1-800-305-2204 between the hours of 7am - 12am CST. Give them the model number of your television and ask them for help with you set-up problems. I hope this information helps you with your problem.

Jan 19, 2009 | Dynex DX-LCD37 TV

1 Answer

User Manual for (Dynex) DX-LCDTV19


Go to the Dynex web site. Type your model number in the search box and follow the link to the user manual.

May 23, 2008 | Televison & Video

Not finding what you are looking for?
Dynex DX-L32-10A 32" LCD HDTV Logo

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74630 Answers

Cindy Wells

Level 3 Expert

5220 Answers

Jaime Hernandez

Level 3 Expert

2323 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...