Question about Lexmark X4530 InkJet Printer

1 Answer

I was able to scan to my computer four pictures without any problems. When I tried the fifth, I get a "scan request failed" repeatedly. Nothing changed between the computer and the printer. It's a wireless connection. Turning the printer off and on doesn't change the problem. I cannot scan anything now and continue to get the same error message. I've even tried leaving it unplugged for 30 to 40 minutes; no joy.

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 3,344 Answers

What is the status of the WiFi light on your printer? Try to check if your printer is still connected to your wireless network by printing the wireless network settings. How to Print the Network Settings Page on the X3500 and X4500 Series Inkjets; a Brief Explanation of its Values. Check the SSID and the IP address of the printer and see if it's the same as your network.
You can also try to relaunch the Lexmark Wireless Setup utility to connect to the printer again.

Posted on Jun 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scan processing slow


Try making sure there is no power filter on the network line, and that the network line has a straight shot to the router without going through any other 5 port switches or anything. normally when the scans are slow, and the prints are slow, it's a cabling issue.

when you're ready to replace that old thing request a quote from Skelton!


Copier Quote Houston Lease Rental or Purchase Price Cost On New or Used...

Jun 19, 2014 | Sharp AR-M455N Copier

1 Answer

My computer was returned and still doing exactly what I sent it to you to repair. Order #BBJM23901


We do not repair things. Just try to give you solutions for the problems you ask about.

Dec 31, 2012 | HP Computers & Internet

1 Answer

Toshiba- L755D- keypad- mixed- up- spacebar- puts- a- dash- between words the i button goes to full screen and the o button opens a developer tool window


Maybe a virus or infection has hijacked the keyboard. Try booting into Safe Mode and see if it works. Also while in safe mode download and install MalwareBytes and run a Quick Scan.

Turn off the computer, then hit the power button to turn it back on and immediately start hitting the F8 key repeatedly until you see SAFE MODE. Take the Safe Mode With Networking option (this will give you internet connectivity) and let it boot up. Safe Mode will look different to you, the screen will be darker and the icons bigger, this is normal. Open your internet browser, then download and install MalwareBytes and run a Quick Scan.



Go to www.google.com and in the search box type: "Download cnet Malwarebytes" (without the quotes). Download and install malwarebytes from the sites download.cnet/malwarebytes. When the site opens up click on the Green Download button on the left. Do not click the Red Download button, that's junk. When it finishes installing the Gui Interface will open up with an offer to Accept a Trial Version or Decline. CLICK DECLINE you want the totally free version. Run a QUICK SCAN. As it scans, if it finds infections the number will be in red. When it finishes scanning, click SHOW RESULTS. A notepad text document will open up showing you the results. You can close the text document and go back to the Gui Interface where you will click REMOVE SELECTED RESULTS. The objects will already be selected for you. When it finishes removing the objects click ok and it will sometimes reboot your machine.

If after the above steps you still have the problem try downloading and reinstalling the touchpad driver.



Get online and got to www.google.com In the google search box type: "Toshiba Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Download and install the Touchpad drivers.



If the issue still exists try Rolling your System back to a date and time before the keyboard started acting up by running System Restore.




Click Start/Programs/Accessories/System Tools/System Restore. Select a Restore Point (date and time) that is before you started having problems. System Restore does not delete you data, documents music, pictures, videos or programs (unless the program was installed after the restore point you selected).

System Recovery loses all your data, documents, music, pictures, videos and programs. It sets your system back to the time you first purchased it.


Jun 08, 2012 | Computers & Internet

1 Answer

I HAVE 5 SCANNERS, FOUR OF THEM SCAN AS THE ITEMS PASSES IN FORNT OF THEM AND THE FIFTH ONE NEEDS TO PRESS THE BUTTON. HOW DO I CHANGE THE FIFTH TO SCAN AUTOMATICALLY


If you look in the manual, you will see the code to place the scanner in to "stand" mode which should do as you request. This mode is restricted to certain models however. Near as I can tell, there are a few variants of the Z-3051HS model that support this. Reference the manual at the link below. Please update this with any other questions you may have.

Thanks,
Dan

Link: http://www.zebex.com.tw/old_website/documents/users_manual/handheld/z_3051hs.pdf

Apr 02, 2011 | Zebex ZBA Z-3051HS Barcode Scanner - P/N...

1 Answer

Trying to scan a picture into my computer; printer screen says "requesting scan" for about 2 minutes, then it says "scan request failed"


If you simply plug the new All-In-One into the USB port on the PC, a "new" plug-and-play event will install a new copy of the printer driver. To confirm that this is the cause of your issue, look for two copies of the printer in the Printers folder.
What to do
To resolve this issue, restart the PC. Scanning should now work as expected.

Oct 28, 2010 | Lexmark X5495 Printer

1 Answer

Ballast resistor location


should be on the firewall...can't remember which side but I think its on driver side It's ceramic rectangle with four wires. (I had one and just can't picture where exactly it was.) One tip though, when you put it back on, use some high temp silicone around top and side edges, leave bottom open. They usually fail from water dripping down and cracking resistor (gets hot).

May 09, 2009 | 1988 Chrysler Fifth Avenue

1 Answer

Dell Photo AIO Printer 926 scanner


I want to scan pictures onto my computer to post them and when I push the scan button it says Requesting scan~ and then Scan request failed... Any ideas?

Mar 31, 2009 | Dell 962 Photo All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X4530 InkJet Printer Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...