Question about D-Link Computers & Internet

2 Answers

I need my d-link wireless password to connect to an I pod touch, I had it written down but it must be wrong and the touch wont recognize the wireless.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 32,281 Answers

If the default password has been changed then -
You can go into your D-Link's wireless configuration to get the encryption (password) setting. If you have forgotten the password to login to the D-Link then reset the D-Link.

To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Posted on May 27, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 159 Answers

If you don't remember the password for your wireless you will need to do a hard reset on the router and restore it back to factory defaults.

Press and hold the reset button at the back for 30 seconds. The router will reboot and you should be able to login to the config page at http://192.168.0.1 with the user name "admin" and no password

Amardeep
For more tips, visit my blog at http://thegeektweet.wordpress.com

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to find out my password. i seem to have written it down wrong. i have internet but need to enter the password into another device. how can i retrieve it?


plug in directly using an ethernet cable.
Turn of wireless connections and open your internet browser
Go to 192.168.0.1, or 192.168.1.1
This is your routers config page. under "wlan security" or simply "Security" will be your wireless password.

Jun 11, 2011 | Computers & Internet

1 Answer

Can not connect my i-pod touch to the wireless internet at home. computer connects ok. i-pad touch connects at other locations, but not at home.


In your wireless management tab, select "forget connection". Select your network to connect to, enter password information, and you should be good to go.

Jan 06, 2011 | Computers & Internet

1 Answer

How do I connect my i pod touch to the internet with the firewall?


Greetings,

You will need to deactivate your firewall in order for your ipod touch to connect to your wireless internet Thank you for using FixYa! =)

Nov 25, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Connection to I Pod touch from PC desktop computer Unable to connect


1.- You must verify that the desktop computer works without problem in wireless way with the D-Link device.-
2.- The I Pod touch device is an external unit to the desktop computer, so you have be shure of the first condition.-
3.- If the destop computer don`t work in wireless conditions, the fail is in the configuration of the LanWireless, you must check both, D-Link device and computer configurations.-
4.- If the computer works ok, the problem is only in the I Pod touch only.- You muts to check fisical connections and I Pod hardware.-

Sep 02, 2010 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Have purcased I pod touch but it wont connect to zoom tried using same password as my laptop without sucess can you help


you need you SSID and your wep/wpa key to connect to any wireless device. Use the same information from your laptop conenctions and it should work.

Sep 01, 2010 | Zoom (5590-00-03) Wireless Router (G66115)

1 Answer

Got i pod touch internet problems


when you set up your home internet, it comes with a password. you might have it written down somewhere, and if not, most routers will have a utilities site where you can log in and discover (or re-discover) your router's password. 
hope this helps ;-)

Apr 04, 2009 | Apple iPod touch

1 Answer

I pod touch connecting


If you are trying to connect via a wireless router see this link to get the required settings
http://www.howtofixanything.co.uk/howto-173.html

Feb 09, 2009 | NetGear WIRELESS-G WGR614 802.11G WIRELESS...

1 Answer

Forget router password


You will need to figure out your password, or remove it completely. If you just want to get rid of it hold down the reset button in your router until it blinks (10-20 seconds) If you want you can then log in to the router's configuration page and set a new password.

Dec 30, 2008 | D-Link DE 220PCT Network Adapter

1 Answer

Hello, i need to know my password to my net gear box, so i can hook my i pod touch up


Is it the password to get inside the router or the password for the wireless connection?

Jul 26, 2008 | NetGear WG111T 802.11g/b (E82321) Wireless...

1 Answer

I pod touch problem


You'll have to un recover. Hold down top (hold) buton and press the middle square at the same tim. Hold till you see recover mode.

Jul 21, 2008 | Apple iPod touch

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...