Question about Acer Aspire 3610 Notebook

1 Answer

Averatec 6200 laptop - black screen only with cursor blinking

Dear Assistant, I own an Averatec 6200 laptop since about three years. Recently I had some trouble with it in that the wireless did not work any longer and also the computer became very very slow in starting. I then loaded the three recovery media CDs and ran these. To my surprise, following this operation, the computer was "stuck" in the BIOS screen and I am not able to get out of it, even if I use F10 and the on-screen commands that should clearly get me out of this mode and revert me to the regular screen display. I just get a black screen with the cursor blinking at the top left if I quit the BIOS. What do I do to handle this problem so I can see my regular screen again and not just a black screen with the cursor blinking in the left top corner. Thank you in advance for your advice. Best, Thomas Bucher

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 52 Answers

Visite This Site To See The Solution Of All Laptops
http://www.laptoprepair101.com

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Are 2002 Aztec computers compatible


I am assuming you are discussing the 2002 Pontiac Aztec, the early crossover with the rather distinctive look. I would assume that since they were made by the same manufacturer and they used the same parts that their computers should be compatible. I can't say so for certain as you haven't provided much information, but, unless one of the Aztec owner swapped out the original computer and replaced it with an updated device, the computers should be compatible.

If you are thinking of trying to swap computer chips, I would advise you to wait and let a professional do it at an independent shop. The reason I suggest this is simple, unless you know how to access the computer chip correctly, you risk accidentally ruining it. If you handle the replacement chip incorrectly it is entirely possible that for a stray static charge to ruin the chip by blowing out a trace. Also, if you damaged the socket from which the original chip was removed then it is possible that you will not be able to reinsert the new device without bending any leads on the bottom. If the leads are damaged, then the new computer won't work.

Even if the new computer chip and the original chip were already installed in installable cases (the way most desktop computer chips are installed), it is possible that when you removed the computer, you might have damaged the receiving socket which means that when you go to insert the new computer carrier it won't work correctly because a few or many of the pins on the bottom of the board won't sit correctly.

Jan 03, 2015 | Computers & Internet

1 Answer

Why doesn't my HP 4620 print black ink


Either the BLACK INK CARTRIDGE is out of ink of it's possible the ink jets (they eject the ink onto the paper) are clogged/dirty. Your software under HP in PROGRAMS from the START MENU should provide a 'cleaning' cycle. How to Clean Print Heads is a link to help you with how.

How to Really Clean an Inkjet Printer in 5 Simple Steps Printerhacks

Good Luck

PC Doctors - Dallas

Jul 08, 2014 | Computers & Internet

1 Answer

9.9 merc outboard serial # 114058 what year is it ?


The best I can tell the year would be 1986.

Is the Serial number A114058?

Jul 03, 2014 | Computers & Internet

2 Answers

HP vp17 screen is turned blue How to get back the colours?


I recommend you check the signal cable plug (from the monitor) is fully inserted into the PC.

Jun 10, 2014 | Computers & Internet

1 Answer

How to load 3 hole punch paper in a copier


Like normal. Those three holes should not affect the print at all as all of the rollers are flat. I would not not stick it in a dot matrix printer though.

Jun 05, 2014 | Computers & Internet

1 Answer

Screeen is upside down


If you have a Windows OS, press and hold the ALT and CTRL (control) keys and then press the Up arrow. (If that doesn't work, try holding the Alt and CTRL keys and pressing the left (or right) arrow key twice.) If that fails, right click on the desktop (Windows+D will minimize all programs), anywhere with no running programs or icons. Then select the Screen Resolution option. Look for the line Orientation; use the drop down menu to select the correct orientation. Click Apply and then confirm the setting change if a confirmation window pops up. (This works in Windows 7 and 8.) For older Windows versions on laptops, you may need to select Graphics Properties (or a similar line) and then repeat this. The Windows screen rotation option is dependent on your video card. With some models, you'll need to open the graphics card properties to undo the rotation. You should see a line for the graphics adapter when you right click on the Display.

For Macintosh OS, make sure that the System Preferences is closed. Then open it by pressing Option/alt + CMD . Select the line Display. Find the button labeled Rotation: Standard then choose the correct screen orientation.

I hope this helps.

Cindy Wells

Jun 01, 2014 | Computers & Internet

1 Answer

How to fix computer problems for free


First make certain you have a virus program running and do a full scan. There are free ones around, most use AVG. You can get pop-up blockers, or look at internet options and select block pop ups.

Visit the following website called Black Viper. Follow the instructions and that should speed up your computer.
http://www.blackviper.com/

Mar 07, 2014 | Computers & Internet

1 Answer

After turn on my computer I have only three short beep.


Open the cpu cabinet cover.Then reconnect the RAM memory into motherboard. Make sure motherboard is not ground with cabinet cover. Clean dust from motherboard .If there is any pci or vga card reconnect it. Also pull cmos cell from motherboard for 10 minutes then all settings defaults then check. Let me know if you need further assistance. Thanks for using FixYA.

Feb 03, 2011 | Computers & Internet

Not finding what you are looking for?
Acer Aspire 3610 Notebook Logo

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18344 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...