Question about Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio

1 Answer

I am trying to program specific frequencies in my bearcat BC350C scanner, i get the code input how do i get it to hold it. the instructions say to press enter, so what is the enter button.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 98 Answers

The ENTER button or E button is what you press after entering number say:453.300 (Enter) then Scan it. thats all.

Posted on May 27, 2011

  • Steve Tompkins
    Steve Tompkins May 27, 2011

    Make sure you press PGM button before code: say example: Press PGM it should stop. Type say 453.300 then ENTER and scan it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a video on how to manually program the bearcat scanner BC355C 100 channel to put in my area frequency into the scanner?


Sorry, but there is no such video that I know of. Besides that, your BC355C is not a programmable scanner in the standard sense, in that you cannot enter frequencies via the keyboard. You can, however, transfer a displayed frequency from the SCAN or SEARCH mode into the PRIVATE bank. Fairly simple instructions are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC355Com.pdf

Bill B.
Listening in since the 60's

Jan 13, 2011 | Uniden BC350C Base Scanner

1 Answer

How do i program frequencies into my uniden bearcat scanner bc350a


The BC350C is a factory pre-programmed scanner, so you cannot program it in the standard manner - entering frequencies via the keyboard. You can, however, transfer a displayed frequency from the SCAN or SEARCH mode into the PRIVATE bank. Details for doing this are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Jan 09, 2011 | Uniden BC350C Base Scanner

1 Answer

How do I program specific channels in a bc350c scanner


hello first press bank 1 ,press pgm key enter frequency and then enter when you have the bank 1 full start bank 2 etc goodluck

Dec 16, 2010 | Uniden Bearcat Pro PC68XL 40-Channels Base...

1 Answer

I have a Bearcat Scanner (Uniden Bearcat BC145X) how do I set up the chainals


The BC350 is a pre-programmed scanner. You cannot program it in the usual manner (direct keyboard entry of each frequency), but you can transfer displayed frequencies in the SCAN or SEARCH mode to a PRIVATE bank. Detailed instructions for operating your scanner are in the factory manual which you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Dec 10, 2010 | Uniden BC350C Base Scanner

1 Answer

How to program my BC560XLT


The factory manual should answer all of your questions. You can download and print it, free of charge, here:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC560XLT%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

Aug 01, 2010 | Uniden BC350C Base Scanner

1 Answer

HOW TO PROGRAM


Press the HOLD button,press PROG.button, use the up or down to get to the frequency you want while the CH is blinking, press BAND to escape, press PROG. to store it in the channel.....get your frequency's at www.RadioReferense.com ...hope this was helpful..

May 29, 2010 | Uniden BC350C Base Scanner

2 Answers

Cant get programed


Programming the BC350 is fairly straight forward, and the operating manual has very good step-by-step instructions. You can download and print the manual by following the link below. The programming instructions are detailed on pages 24 through 28.

http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Dec 31, 2009 | Uniden BC350C Base Scanner

1 Answer

How to program


There are several ways to program your scanner, so it's best that you refer to the owner's manual for detailed instructions. You can download/view/print the manual at:

http://uniden.com/pdf/BC350Aom.pdf

Sep 01, 2009 | Uniden BC350C Base Scanner

1 Answer

Need to know how to put codes in


If your scanner is the BC350C (the section you posted in), here's a link to the owner's manual which will give you detailed programming information:

http://www.uniden.com/pdf/BC350Com.pdf

If you have a different model Bearcat scanner, try:

1. Push MANUAL to stop scanning and advance to the channel that you want to program.

2. Enter the desired frequency, including the decimal point (e.g., 156.015).

3. Press E or ENTER to set the frequency.

4. Repeat the process, starting with 1 above to select the channel.

NOTE: With some Bearcat scanners you may need to press the E or ENTER key before entering your frequency.

These are general steps that work on most recent Bearcat models. If they don't work on yours, try different variations. You can also check Uniden.com -- they may have an online manual that you can download and print.

Apr 25, 2009 | Uniden BC350C Base Scanner

Not finding what you are looking for?
Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

211 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

509 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...