My motherbord is mercury pvm7.During starting it does not start,when i leave ups on for sometime and press start button it get started and working good.But when i turn off my pc and start it after some hour it encounter same problem.
please help me what to do.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In this case when it is always beeping during the computer is on. You need to check the memory stick if it is not faulty. Remove the memory stick and clean it from dust. Clean also the memory slot and reinsert the memory stick. If the problem still occur try to use the other memory slot.
just press del to enter to the cmos and then change the date and time of cmos and press F10 to save your configeration if you start the cpu again and if you see the message "press F1 to continue and del to enter bios it time to replace your cmos battery inside of cpu is like a coin inside of your computer
So I think you are saying it did work and then stopped, right?
If that's the case then I would try booting into the BIOS setup and reseting it first. If that does not work then I would reboot into the BIOS again and see if there is something there you need to enable for the AGP port to function.
If all this fails then you most likely have a bad motherboard. It's probably not worth the money to consider having it repaired, and I doubt you'd find anyone who's even interested trying.