Question about Linksys Network Everywhere NC100 Network Adapter

2 Answers

I have DSL with a wireless Westell modem/router. My Mac connected with no problems, my Dell laptop connected with no problems. The problem lies with a Dell desktop that I am trying to connect. It has a Linksys Wireless G PCI Network Adapter. Going through the network setup wizard on the computer it shows the adapter is working fine, but it shows no wireless network available. This can't be so because I'm sitting right beside the desktop using my laptop to send this email. My service provider was no help at all they say it's a computer problem and that they could help for $15 per month. Any ideas?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 336 Answers

Try to open your DELL desktop then the Linksys Wireless G PCI card please clean and insert to other PCI slot of motherboard.if the problem same again you need change that Linksys Wireless G PCI card maybe same parts defective. if you buy wireless wifi try usb type.so it's easy to install.

Posted on May 27, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Linksys Master
  • 6,487 Answers

What you can do here first is to disconnect and reconnect the wireless antenna of the wireless adapter and make sure its connected to it securely and then see if you can find a blue or green wireless icon for the Linksys adapter on your task bar.

If you do find that green or blue icon there open that and see if that opens the Linksys LAN monitor for the adapter. If it does open you go to site survey and then see if it detects the network and if it does connect to it and that should be fine.

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I hook up my Westell wireless router to the zhone modem so I can use my laptop. I have to use a dedicated line with a zhone modem to get DSL service. I want to hook up my wireless router Westell...


Connect the Westell wireless to the Zhone as if the Westell is the PC that used to be connected to it. Then connect the PC (through any available port) only to the Westell. That's the WIRED connection. For the wireless to work, after connecting through the WIRED connection, there should be a CD that came with it that will help you configure the wireless.

Feb 18, 2010 | Zhone 6212-I3-200 Router

1 Answer

How do i connect my verizon dsl westell 6100 to my belkin g rtr?


Wellll....since it seemed an impossible task, I tried the next best thing.
I bought a wireless adapter for the other pc and voila! they are on the internet, and I am returning the router.

Westell modem + Verizon DSL w/usb = No connection to router.

Dec 28, 2009 | Belkin Wireless G Plus MIMO (F5D9010)

1 Answer

I have charter internet with a modem and i have a westell 327w wireless router/modem. How can i connect the two modems to work wirelessly?


I think the Westell Router/modem that you have must be the modem for the DSL connection.
Charter is a cable internet service provider.
You can not use 2 modems connected to each other.
You have a charter modem , you can purchase a wireless router only.
That will work.
Click Here for more info about routers

Oct 27, 2009 | Westell Wirespeed VersaLink...

1 Answer

DSL line disconnects on WRT54GS only


Try to change the LAN IP address of your router to 192.168.2.1 by accessing the router's Setup page. You also need to set your Westell modem to "full-bridge mode". You need to ask assistance from your ISP to bridge the modem. After that, set-up the Linksys router to PPPoE then power cycle it.

Apr 15, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Changing from DSL to Road Runner Turbo


I'm sorry to say but you cannot bypass the modem capability of the DSL Westell Modem/router because that is really made to function as a DSL modem and a router at the same time, so the best way to make everything work here since you change from DSL to Cable internet just need to get a wireless router like a Linksys WRT54G that can make everything work again like before.....

Nov 05, 2008 | Westell Wirespeed VersaLink...

3 Answers

Westell 327w


xbox live connection test MTU failed

Mar 12, 2008 | Microsoft Xbox 360 Console

2 Answers

Hook up westell 327w to linksys router


the wireless won't work. i have the same problem. westell modems aren't compatible with wireless function on some laptops therefore routing signal through a wireless router allows that. it can be done, i've done it but after modem was reset having issues. keep searching it can be done...

thanks for the vague and non-informative answer though whoever that was.

Jan 14, 2008 | Westell Wirespeed VersaLink...

1 Answer

DSL modem and Linksys Wireless Router not working together anymore


if i were to guess you are probably a PPPoE user with a dynamic IP address.

possible config

Dec 18, 2007 | Computers & Internet

1 Answer

Networking problem


Ok, I would try resseting both at the some time. Then checking the mac filter to make sure that both u and ur bro can access it. it could also be that you card is broken and needs to be replaced. I hope this helps!

Aug 09, 2007 | Actiontec (GT704WG) Router

Not finding what you are looking for?
Linksys Network Everywhere NC100 Network Adapter Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...