Question about Linksys Wireless-N WRT150N Router

2 Answers

Hi! I'm using a LINKSYS Wireless-N WRT150N router. I forgot my password so I pressed the reset button to revert to default settings. I just realized I don't remember where I placed my installer and manual... Where do I go from here? Thank you for reading my e-mail.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 207 Answers

These steps may give you some lift.
1. first make sure that the PC attached to your router is DHCP for you to be able to access the router
2. second, open any browser and then type on the URL the default IP Address of the LynkSys router: the default IP is 192.168.1.1 the default username and password is admin
3. that will get you in the router configuration

Posted on May 27, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 415 Answers

Go here and download a new manual and software http://homesupport.cisco.com/en-us/wireless/lbc/WRT150N You'll have to put in the version number on your router to get the correct one :)

Posted on May 27, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forgot my password. How can I establish a new one or retrieve the current one? Gerry


To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of therouter with the power ON for 20 secs. then release the RESET button.
To connect to your wireless router, the router's wireless settings needs to beconfigured with the SSID, encryption etc. and also the wireless cards in allthe laptops/computers needs to be configured with these router's wirelesssettings. Then the laptops/desktop computers can communicate with your wirelessrouter.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Sep 10, 2011 | Linksys Wireless-N WRT150N Router

2 Answers

Forgot user name and password need to add new


Sorry but this is the only to reset the password

Press the Reset Button for approximately 10 seconds

Resetting the Router will erase all of your settings (WEP Encryption, Wireless and LAN settings, etc.) and replace them with the factory defaults.

Jun 06, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

The power led is hardly working and the router is not responding


Try reseting the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Apr 26, 2011 | Linksys Wireless-N WRT150N Router

2 Answers

I need to reset my wifi network password but don't know how


The router's password can be changed by running the routers setup cd. If you do not have the cd:

1.Open your browser

2.In the address bar type in 192.168.1.1 this will bring you to your router configuration.

3.put in your username/password "If you forgot your username and password you can always reset your router, if that is the case your router will go to back to default settings,In order to reset the router look in the back of the router and you will see a reset button, press and hold the reset button for 30 seconds, the reset button is located next to the Internet port on the router.

4. When your linksys router configuration is up, go to Administration.

5. change password that's it!! hope this helped. Good Luck

                      

 

  

                                               

Sep 29, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

I have linksys wireless n WRT150N, i forgot my username and password how can i retrieve them?


The Linksys can be reset to the deault settings by -
Power up the wireless router, press and hole the pinhole RESET button at the back of the router for 30 secs until it restarts.
The default login =admin
the default PW = admin

Sep 29, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

Resetting user and password on my linksys WRT150N V1.1


If you want to reset the administrator password of the router to its default , the only way to do that is to Press and hold the Reset button of the router while power is ON for 15 seconds and then after that the router is back to its default settings already with default password.

May 14, 2010 | Linksys Wireless-N WRT150N Router

2 Answers

Resetting user and password on my linksys WRT150N V1.1


The way to reset the router to its default settings including username and password is to press and hold the reset button on the router using a pen or a paper clip for 15 second while power is ON then after power off the router and that's it, The router is already back to its default settings with the default username and password.

Mar 26, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

I forgot my password how do i reset it


On the back side of the router , you will find the small reset button ( red coloured hole). Just press that button for 30 seconds. release the button. Unplug the power to the router and plug it back in. Waite for 1 minute.
Once you reset the router , it will come back to the factory default settings.
You will need to reconfigure the router according to the Internet service provider.
That means you will need to set up the router for the Internet.
Click Here for more information about router set up

Feb 18, 2010 | Linksys WRT150N Wireless N Router -...

1 Answer

I cant connect a new laptop to my 150n router. i also forgot my password


Hi,

For you to resolve this problem, please follow the following steps:

(1) Press and hold the reset button for 5 seconds.

(2) You would be prompted to input a username and password, use this default on both fields "admin". Just input admin on both fields and click enter.

This would rectify the problem.

Good Luck.

Oct 13, 2009 | Linksys Wireless-N WRT150N Router

1 Answer

I forgot my password, I have 2 reimaged computers and no software


Are you running wireless or wired. If you are runniong wired there should be no software required. If you re running wireless you are going to need to reset the router. There is a small button on the back press and hold for 15 seconds. This will reture the router to default settings. The default for your rounter is Username=do not input anything in this field. Password=admin. Once there you should beable to reset everything.

Sep 24, 2009 | Linksys Wireless-N WRT150N Router

Not finding what you are looking for?
Linksys Wireless-N WRT150N Router Logo

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...