Question about Philips Audio Players & Recorders

1 Answer

I can not get the receiver to communicate with the TV or accessories, the stereo in the unit is working fine

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 159 Answers

1. Check your connections. I have a tendency to put my "audio Out's" into the "audio input" jacks when I am setting up a system -- all the plugs look the same, it's just that the info is going the wrong way. Make sure you have the "Audio Output" from the TV and other accessories plugged into the "Audio In" on your receiver. I don't mean this to sound patronizing -- I have been stumped by this problem in the past, so I assume I am not the only one ...
2. Make sure that once everything is plugged in properly, you have your receiver set to the correct input setting -- mine (which is an older model Phillips system) has a "CDR" setting and an "AUX" setting ... even though it only has one set of input jacks. It never made sense to me, but it only works in "AUX" mode, not "CDR" mode.
If these do not resolve the issue, please give your stereo's model number and I'll see if I can find some more info to help.

Posted on May 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What do you think the problem is as to why my ipod want load up,i keep getting the message ipod communication aborted.


bad receiver in the radio, or, the transmitter on the ipod is bad. try it on another bluetooth source to see if it maintains connection, if not, the ipod could be damaged or bad. If it works with another bluetooth source unit, then the radio has a bluetooth receiver issue.

We sell low priced replacements!

http://advancedelectronic.net/

Nov 22, 2014 | Pyle PLDN74BTI Car Video Player

1 Answer

Left speaker is very quiet


This may be a capacitor problem, evaluate and replace if bad.

Feb 12, 2014 | Harmon Kardon AVR 700 A 5.1-channel...

1 Answer

After market stereo works with key in acc. Does not work with engine running. There is power 14.0+ V in both the continuous power wire(yellow) and acc power wire when started (red) going into head unit....


Most, if not all cars will shut off accessory power when cranking so that the starter has plenty of current.
If your stereo doesn't come back on again once the car is running, that's a different story... is it a cheap and nasty unit?

Nov 03, 2013 | Car Audio & Video

2 Answers

No display


open and clean your car stereo receiver and check it again

May 22, 2012 | Kenwood Used Kmr-440u Car Stereo Receiver

1 Answer

Stereo wont turn on only red light is blinking


It sounds as if you are lacking accessory power to the unit. Insure that the red wire of the Pioneer unit is receiving 12 volts with the key in the accessory and on position.

May 05, 2011 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

CONNECTING MY TV TO MY STEREO


Make sure the output in your tv menu is set to external speakers. Any digital optical cable, or RCA jacks hooked up properly from the TV's out put to the receivers input should work just fine. Take your time, retrace your steps, and make sure each cable is in the correct input/output. And make sure the receiver and TV are on the proper settings. Good Luck, and thanks for using FixYa!

Dec 31, 2008 | Technics SC-DV290 System

1 Answer

[MSI 8606 TV Tuner Card] Can't get a picture


here is a link for the driver, http://drivers.softpedia.com/get/TV-Tuner-Co/Others/MSI-TV-Tuner-Master-8606-WDM-279165.shtml

Mar 10, 2007 | MSI 8606-020

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Audio Players & Recorders Experts

Gyula Lacz

Level 3 Expert

484 Answers

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...