Question about Belkin PC Desktops

2 Answers

Belkin wireless G router-2.4Ghz-802.11g ,i,m not getting the internet conection via router .pls help or give me tel no to contact u..i've been using the router for more than a year now and there was no problem...but now on the screen it shows that router version should be upgraded...pls help..

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Instructions to connect a Belkin wireless G router to my modem I lost the manual


Posted on Jul 13, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

Go to the Belkin support section at their website: http://www.belkin.com/support/

Look for your model router and download the "firmware" upgrade for it. Once you go install the up to date firmware try to give the router a reset. Hopefully doing all that will get the router working again and you connecting to the Internet.

Posted on Aug 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I bought a Belkin N Wireless Router F5D8236-4 v2 and changed my internet provider a few months later and I have lost the Installation CD, can I install it without the CD?


Yes you simply need to hook up via an Ethernet cable, open a browser type in the routers address, login with username and password, and then you can edit any setting you like. Then when finished you save settings and reboot router.
installation guide below.
en-us-support.belkin.com/app/answers/detail/a_id/2533

Aug 12, 2010 | PC Desktops

1 Answer

My apartment receives its internet connection via ethernet from an external router. I had been using the Belkin F5D7231-4 as a wireless router (not configured as an access point) but recently it dropped...


You don't want to set a static IP address in your wireless router. You'll be connected to the network alright, but the IP address won't be recognized by the primary router. Thus, you'll see you're connected with only local access.

First and foremost, ensure that your Internet connection is valid. Plug the ethernet cable from the wall directly into your computer and test the connection. If you can't get it to work, then the problem is not on your end. Contact the agency in charge of the external router (e.g. apartment maintenance).

If your connection is fine hard wired, you may have bad data or a faulty configuration in your wireless router. I suggest doing a complete hard reset (there should be some instructions with your router on how to do it--some have a small flush mounted button that you have to press for a few seconds). Set up your wireless router as if for the first time. This should take care of your problems.

May 23, 2009 | PC Desktops

1 Answer

I can connect Belkin router N Mino(F5D8633ak4A)to myPC (window NT)and can use internet. But internet sign on router is amber about 10-15 minutes and I still can use internet.It will turn to solid blue...


hi buddy!

first you move is configure your router to internet connection you have.

by typing 192.168.1.1 or .2 or .3 but most default is .1 and configure it in 1 computer only after that then you can conect all the computer you have ok. if you like more chat me how to configure ok or reply it thnx im willing to help you.

PS:
pls rate me if my solution solve the issue and you need more further information. but if is invaluable solution rate me fixya.

Sep 20, 2008 | Belkin PC Desktops

1 Answer

Belkin router when connected will send wireless signal but will not allow mother computer to gain access to internet. tried bridging on dsl, and pinging. when i called belkin the @#$%^& told me it...


Assuming your router is set correctly to your modem or the password and username are set correctly in a modem/router, make sure DHCP is enabled in the router, this gives each pc an ip address automatically.

Go to open internet explorer>tools>internet options>connections tab and ensure never dial a connection is ticked or greyed out. close IE

go to network connections, right click on your wireless adapter>properties>highlight TCP/IP line>properties and make sure that obtain an ip address automatically is ticked.

Open up internet explorer again and click refresh a few times, it will detect the proxy server then should connect, if not then the router configuration is wrong.

Sep 09, 2008 | Belkin PC Desktops

1 Answer

I HAVE A COMPUTER UPSTAIRS & CONNECTED TO INTERNET, I WANT 2ND COMPUTER (W/C IS IN THE GARAGE) TO GET CONNECTED ALSO IN THE INTERNET. I HAVE A BELKIN WIRELESS ROUTER BUT IT SEEMS I CANNOT GET IT...


ok is the one upstairs hard wired if so log into your router and set your wireless to enable others to see make sure you set wep for incription and remember code you use save and log out then go to start / run type cmd then enter black screen white writing type ipconfig and note ip add subnet & def gateway this way you can set other pc to a simular ip add but same subnet and gateway, if you have problems and are in uk post back with phone number to contact will give you a bell

Regards

Brian

Jul 16, 2008 | Belkin PC Desktops

1 Answer

Belkin Wireless Modem Router problem


well, first of all the i also have the N1 belkin wireless modem router, in order for it to connect, there has to be a wireless connection in your area for you to connect to, if any of your neighbors so have wireless you can connect to their network, but if you are not getting a conection that means no one around you has wireless or lan, the belkin wireless is not a internet provider it just extends the distance of your internal wireless. some networks may be secured as well, sometimes you can only connect to unsecured networks unless you have the name and passcode for the secured network.

May 28, 2008 | PC Desktops

1 Answer

When using the Belkin G router the network connection becomes lost and can not get on the internet. My computer has Vista on it and Belkin says that the router is compatible with the program.


This is possibly caused by your firewall or the wireless security (wpa/wep) on the router if you have set it up.
First of all, if you can connect to the internet via a cabled connection the problem is going to be with the way you've set the router up.
If you've setup wireless security on the router, have you also set it up for your wireless adaptor?.
I suggest you try to connect to the internet via cable to start with, if this works try to connect wirelessly with your firewall off.
If all else fails start from the beginning again.

May 15, 2008 | Belkin PC Desktops

1 Answer

Cannot finish installation (Belkin F5D8633-4 wireless modem router N mimo)


ok, obvious questions first:

Do you have a different modem from TALKTALK? can you connect to the internet through that?

if so, you may not have to set a username and password for the belkin router: just connect the belkin router's internet port to the talktalk modem and let the talktalk modem handle the automatic connection.

do you know what protocol the talktalk ISP uses?  it's probably PPPOE; make certain that your belkin router is set to the correct protocol.  if you just hook it up to the talktalk modem though, you probably won't have to specificy a protocol at all.

Mar 29, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

1,198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin PC Desktops Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Are you a Belkin PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...