Question about Gateway Computers & Internet

2 Answers

I cant find video controller device for my gateway 3018GZ. I have tried several devices but all display blurred screen.BASH[NURSE]

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Assuming you are running XP. Here try this one.

Posted on May 26, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,737 Answers

Have you tried installing the drivers from Gateway? If no, installing the chipset driver and the VGA driver will fix your issue. You can download the drivers from the following links.

1. Chipset Driver for Gateway 3018gz

2. VGA Driver for Gateway 3018gz

Click the above links to download the respective drivers, or you can get them from HERE.

Let me know if you need further help.

Good Luck.

Thanks for using FixYa.

Posted on May 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Packard bell notebook screen problem?


If hitting it seems to remedy the problem, I would say you probably have a loose cable somewhere. Either the Video Cable that is at the top behind the screen is loose or the LCD Inverter at the bottom of the screen (has 2 cable in it) is loose.

Mar 28, 2012 | Computers & Internet

1 Answer

My video controller driver for gateway 3018GZ is difficult to find.BASH[NURSE]


Best way is getting from gateway, of course.

From gateway web, it says yours is using Intel® Extreme 2 Integrated Graphics.

Please, search within intel web, it has it!

I hope it helps.

May 26, 2011 | Gateway Computers & Internet

2 Answers

I want to run a software which requires a screen resolution of 1280 x 768 but my Samsung SyncMaster 740nw supports up to 1280 x 700 screen resolution. Is there anything that I can do? Please guide.


Have you tried adjusting the screen resolution in Control Panel - Display - Settings and moving the slider on Screen resolution?
Normally a monitor such as Samsung LCD would be able to display a higher resolution.
If you cannot adjust the Screen resolution in Display - Settings then it may be that the correct video driver was not installed or is corrupted.
To check if the video diver is OK, go to Control Panel - System - Hardware - Device manager and click on Display adapter. Check that your display adapter is OK and working. If you see a yellow ? against the video adapter or a standard VGA adapter was installed then you need to re-install the video driver for your model graphics card.

Oct 30, 2010 | Samsung SyncMaster 740N 17" LCD Monitor

2 Answers

I can't change the resolution back to 1440 by 900


The screen resolution is set by the operating system. If windows go to control panel/display/settings. If the onitor is working properly it should be recognized by the computer, if not you may need to install a driver for it.

Oct 06, 2009 | Gateway FPD1975W 19" LCD Monitor

2 Answers

System does not see new video card


Confirm the card works in another system to eliminate it as a suspect. Try a beefier power supply in the machine (sometimes these 300 to 350 watt supplies just cant hang when an addon card is installed). Check the BIOS settings and make sure that the PCI Express slot resources are active for the card. If the card uses a power connector, make sure it is connected. Keep us posted.

Mar 21, 2009 | Gateway GM4019E PC Desktop

1 Answer

HDD password for Gateway (model 3018GZ)


This is a protection feature on the system and i'm guessing one of the users on this system set it up - intentionally or accidentally. Best resolution to this (apart from replaceing the Hard drive) is to contact the vendor of the product and get the master password for the system.

Jan 12, 2009 | Computers & Internet

1 Answer

NO LCD PICTURE


Attach an external monitor to the laptop and boot the laptop.
If you get video to the screen then it is probably the inverter for the laptop screen has failed and can be replaced.
If you have no screen available, then turn the laptop on, shine a bright light into the screen from an angle and see if you can see any kind of images at all. Best to wait 2 minutes from when it is first booted to allow enough time for Windows to load.

Hope that helps =)

Apr 12, 2008 | Gateway 3018GZ Notebook

1 Answer

Display scrambles, becomes unreadable.


might just be bad vodeo card ok try anther one try latest drivers reseat the card

Jan 24, 2008 | Gateway Media Center 610XL PC Desktop

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...