Question about NCR 7167 Thermal Printer

1 Answer

Cash Draw issues


We have a few of these 7167 printers with identical cash draw problems. The cash draw either doesn't kick out or stays open permantly.
We have identified two little DMos transistors at Q22 & Q25 that are the issue and are trying to identify them or find replacements.

Can anybody help us?

Very much



Posted by on

  • godl39 Apr 29, 2009

    The NCR 7167 throws an error (Serial Status:-8) when I trying to refresh the status, so my aplication keep asking to close Cash Drawer

  • godl39 May 11, 2010

    do you think that the serial status error means that I have the same problem that Douglas has?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

It should be the RJ-11 Connection on your 7167 System Board... Most likely needs just a good cleaning, or needs to be resoldered <-- NCR Technician Now Sales Rep...

Capital Computer Group
2425 Enterprise Dr.
Mendota Heights MN, 55120

We Buy, Sell, Repair, and Refurbish both new and used POS Systems, NCR,IBM... We also offer structured cabling as well as Video SurveillanceEquipment.

Give us a call and we can trouble shoot it with you!

Posted on Jan 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi Cash register ex-a301 when I press TL/NS machine don't open draw (no click sound nothing) I need to open it menul (from bottom) so I leave draw open and do all day wark Any help PLZ

This is a common problem.
Firstly, try printing a daily report. If it still does not open, it probably has the factory fault. Sharp incorrectly dressed the solenoid wires in the drawer and they are cut by the drawer tray as it closes. There was a large warranty recall. Have it checked by a technician.

Apr 18, 2015 | Retail Supplies

1 Answer

Key for cash drawer

Sometimes there is a latch underneath which can open the cash draw. If not, you will have to take all of the screws out of the bottom and disassemble the draw.

Apr 10, 2014 | Retail Supplies

1 Answer

Cash register draw not opening

tn/ns only gives you X readings and the drawer does not open unless you activate it on system options

Mar 25, 2014 | Sharp ER-A330 Electronic Cash Register

1 Answer

Cash draw won't open after completion of sale - I have to open manually from underneath

Maybe you have to replace the whole solenoide . Or consult a technician

Feb 06, 2013 | Sharp XE-A101 Cash Register

1 Answer

Cash draw will not open

Lots of cash registers use a phone cable to connect from the register to the drawer and that is was signals it to open. Is there one and is it hooked up?

Jan 27, 2013 | Computers & Internet

2 Answers

How do i install 7167 printer ncr

Welcome to Fixya

Connect the ccommunication cable to your computer. Connect the cash drawer cable to the printer and cash drawer. After all cable are connected, install the drivers disk that came with it. Please click here.

Thank you for using Fixya!

Aug 09, 2011 | NCR 7167 Thermal Printer

1 Answer

A till won't open the cash draw tried different

It usually means the drawer wiring has been shorted out at some stage and the internal fuse (most models have a drawer fuse on the main board) has blown. Occasionally the drive transistor may have blown open also. If you want to have a go at it yourself and save some money, C-tech has a service manual here:
Once you have it, I can direct you to the relevant parts/ diagrams etc for drawer drive.

Feb 06, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

The PCI serial port doesn't operate cash drawer

Check your windows firewall program. Make sure your firewall is not blocking the cash draw. Your cash draw program is like a internet connection and the firewall program would be blocking it.

Dec 29, 2009 | Gateway 700GR PC Desktop

4 Answers

Need a code to fire open the till draw


The drawer kick sequence we use is

Mar 31, 2008 | Epson TM-T88III Thermal Printer

Not finding what you are looking for?
NCR 7167 Thermal Printer Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top NCR Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

77499 Answers

Are you a NCR Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides