Question about Lexmark Wheelwriter 10 Series II Typewriter

1 Answer

My IBM WW 10 is locked up. When it is urned on it sets up but then the 1, 1 1/2, 2, & 3 lights just blink and you can do nothing else. Do you know of a way to re-set this problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 3,594 Answers

It is probably a board or keyboard. Try this, remove the batteries, turn off, wait 30 sec, restart, this sets everything to default settings.

DickyO

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want the light to stay on for only 1 minute


I just had my new opener today. try this:
1. press & hold the LOCK button until the lights blinks.
2. if it is a single blink, the timer is 1.5 min.
3. if you repeat step 1, blink twice means 2.5 min.
4. if you repeat step 1......., 3.5 min
5. if you repeat step 1......., max is 4.5 min

May 24, 2013 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Change the combination on a DHo74E


The SentrySafe electronic lock is shipped with a factory set master & manager code (777777).
You should set the lock to your own unique master & manager code immediately.
Please keep your codes in a secure location. You may also register your codes on our website at www.sentrysafe.com.
A single signal (LED flashes and beeps once) response from the lock indicates valid entry.
A double signal (LED flashes and beeps twice) response from the lock indicates an invalid entry.
• If three incorrect entries are entered in a row, the keypad will shut down for a period of five minutes. During this shut down period you will not get a response from the keypad.
Changing the Master Code
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Existing Master Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: 1 - * - New Master Code - # - New Master Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
Changing the Manager Code
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: 2 - * - New Manger Code - # - New Manager Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
Activate user codes
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: User ID Number (3-7) - * - New User Code - # - New User Code - #, before the orange light disappears.
If a mistake is made during the activation, wait thirty (30) seconds and repeat steps 1 thru 3.
• The lock will indicate a valid code entry with a single signal.
• The lock will indicate an invalid code entry with a double signal and the old code is still valid.
Example: # - Master Code or Manger Code - # - 5 - * - New User Code - # - New User Code - #. This will activate User Five (5).
Changing the user code
Always perform this operation with the door open
1. Enter: # - User Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: New User Code - # - New User Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
The Master and Manager can also change the user codes by following the "Activate user codes" section steps 1 thru 3.
Deleting user codesAlways perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: User ID Number (3-7) - * - # - #
Programming your lock codes
2

Dec 17, 2012 | Sentry Safe Dh-074e Solid Steel Depository...

1 Answer

I want to change the combonation


The SentrySafe electronic lock is shipped with a factory set master & manager code (777777). You should set the lock to your own unique master & manager code immediately.
Please keep your codes in a secure location. You may also register your codes on our website at www.sentrysafe.com.
A single signal (LED flashes and beeps once) response from the lock indicates valid entry.
A double signal (LED flashes and beeps twice) response from the lock indicates an invalid entry.
• If three incorrect entries are entered in a row, the keypad will shut down for a period of five minutes. During this shut down period you will not get a response from the keypad.
Changing the Master Code
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Existing Master Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: 1 - * - New Master Code - # - New Master Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
Changing the Manager Code
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: 2 - * - New Manger Code - # - New Manager Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
Activate user codes
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: User ID Number (3-7) - * - New User Code - # - New User Code - #, before the orange light disappears.
If a mistake is made during the activation, wait thirty (30) seconds and repeat steps 1 thru 3.
• The lock will indicate a valid code entry with a single signal.
• The lock will indicate an invalid code entry with a double signal and the old code is still valid.
Example: # - Master Code or Manger Code - # - 5 - * - New User Code - # - New User Code - #. This will activate User Five (5).
Changing the user code
Always perform this operation with the door open
1. Enter: # - User Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: New User Code - # - New User Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
The Master and Manager can also change the user codes by following the "Activate user codes" section steps 1 thru 3.
Deleting user codesAlways perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: User ID Number (3-7) - * - # - #
Programming your lock codes
2

Dec 17, 2012 | Sentry Safe Dh-074e Solid Steel Depository...

1 Answer

I have an IBM Wheelwriter 10 Series ii typewriter that locks up with the 1, 1 1/2, 2 & 3 lights on the bottom right blinking. It will do nothing else.


If it types at first then locks up try a shot of WD40 on the silver shaft that the carrier slides on, if it still happens the carrier motor will need some to it is located under the case in the R. rear.

DickyO

May 26, 2011 | Lexmark Wheelwriter 10 Series II...

2 Answers

I have a IBM Personal Wheelwriter 2 by Lexmark and when you turn it on it beeps twice and then the single and double space lines light up and stay on but the it will do nothing else. (It's like it is...


Probably the key board is bad you can try my tip under WW 1000 or contact Geo. Beters Co.
@ 800-392-8085 for a key board rebuild. Tell them O'Reilly sent you.

DickyO

Apr 07, 2011 | IBM Wheelwriter 30 Typewriter

1 Answer

IBM Wheelwriter 6 Old Series Error Code 3 Beeps and 1.5, 2 & 3 are bliking.


The lights that are blinking indicate a bad keyboard. Contact Geo.
Beyers Co. for keyboard rebuilding. 1-800-392-8085.

DickyO

Jul 28, 2009 | IBM Office Equipment & Supplies

1 Answer

How do you set the bold type setting on an IBM wheelwriter 3 typewriter.


WW3 dose not have a bold feature. You will have to move up to at least a WW 10.
There was at one time a bold printwheel available but I haven't seen one for years.

DickyO

Jun 16, 2009 | IBM Office Equipment & Supplies

1 Answer

10-22 urn


If you have the L1350/155C, the manual states 1-1/4 cups coffee for 12 (5 oz) cups, for 30 cups use 3 cups coffee using standard measuring cups. Take the stem & filter out when the coffee has finished brewing so the bitter oils do not get into the coffee.

Dec 17, 2008 | Faberware 10-22 Cup Coffee Urn

1 Answer

Frozen Wheelwriter


Probably needs a keyboard, but you didn't say what model it is.

DickyO

Jan 17, 2008 | Lexmark Wheelwriter 10 Series II...

Not finding what you are looking for?
Lexmark Wheelwriter 10 Series II Typewriter Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...