Question about Xerox Office Equipment & Supplies

1 Answer

My Xerox WorkCentre M123 does not enter in more ways administrator password is 11111 and x-admin right but as soon as I enter the settings Administrator freeze (crashes) same thing with Internet access, he says working in suspended impossible to enter Administrator mode. How do you do the reset factory settings to try to solve the problem? Excuse my English but I'm Italian

Posted by on

  • mdeluca73 May 27, 2011

    ui disgnostic mode I entered, but when I try to press setting administrator, blocks all
    the machine and I have to turn off and on. Even by going through CentreWare pc, I get the message impossible to enter Administrator mode, there may be works in progress.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

  1. Enter UI Diagnostic Mode.

  2. Press the Log In/Out button on the Control Panel

  3. Select System Settings.

  4. Select Common Settings.

  5. Select Diagnostics.

  6. Select NVM Read/Write.

  7. Enter location 700-171 and press Confirm/Change. This is the current password. You can provide this number to the customer, or set the location to the default value (11111) and allow the customer to enter a new number from Tools mode.

Posted on May 27, 2011

  • mdeluca73 May 27, 2011

    ui disgnostic mode I entered, but when I try to press setting administrator blocks all
    the machine and I have to turn off and on. Even by going through CentreWare pc, I get the message impossible to enter Administrator mode, there may be works in progress.
    after access to diagnostic mode, I can not press any buttons because I lock the car that forces me to shut down and restart. 11111 The password is the correct settings in fact arrive until administrator

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I reset the Admin password?


The default ID and password are "11111" and "x-admin" respectively. When accessing the administrator menus on the copier the code 11111 is used. I couldn't find a way to reset specifically.

I believe you should be able to access the Admin Menu by pressing the System button on the operator panel. A password is required to enter Admin Menu when Panel Lock Set is set to Enable. To Disable the Panel Lock you will need a password. The factory default panel password is 0000. Hopefully you haven't changed that. This procedure is described in the manual on pages 315 ff. I believe from there you can go in and assign a new Admin password if required.

http://www.fujixeroxprinters.com.hk/downloads/uploaded/CM215_UserGuide_Sec_c3b3.pdf

Jul 25, 2014 | Fuji Xerox® DocuPrint C3055DX Laser...

1 Answer

How do a forgotten admin password on a xerox 7655


WorkCentre 7655 7665 7675 Online Support Solution Modify the Printer...
Solution : Modify the Printer's Administrator Password Using CentreWare Internet Services (CWIS) NOTE: This solution assumes the WorkCentre is configured and working properly on the network.
  1. From the computer, open an Internet browser window.
  2. Enter the IP address for the WorkCentre in theAddressfield, and then press [Enter] on the keyboard. The CentreWare Internet Services window will be displayed.
  3. Click on the [Properties] tab.

    NOTE:If the Login screen is displayed, enter the user name in theUser IDfield, and the password in thePasswordfield, and then click on the [Login] button.

    The default username is "admin" (case sensitive), and the default password is "1111". If it has been changed or forgotten, contact Support.
  4. Click on [Security] to expand the list of options.
  5. Select [Authentication Configuration].
  6. Click on the [Modify] button for Device System Administrator Password.
  7. Enter a new password in theNew Passwordfield.
  8. Retype the password in theRetype Passwordfield.
  9. Click on [Save]. This will be the new password to log into the Control Panel and CWIS.

http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=143,E=0000000004704152929,K=9646,Sxi=4,Case=obj(3814)

Solution : Modify the Default Admin (Tools Mode) Password on the WorkCentre NOTE:The Admin (Tools Mode) password allows access to configure network and machine settings on the printer.Xerox recommends only changing the default Admin (Tools Mode) password if absolutely necessary. If the password has been changed from the default password (1111) and has been forgotten, a service call is required to reset the password.
To change the default Admin (Tools Mode) password:
  1. Press the [Log In / Out] button on the Control Panel. The Log In window will be displayed. See theRelated Itemsbelow for additional information regarding logging into the WorkCentre.
  2. Select [Security Settings] on the left side of the screen.
  3. Select [Authentication] from theGroupscolumn and then select [User / Administrator Accounts] from theFeaturescolumn. The User Administrator screen will be displayed.
  4. Select the [Account #] field, and then select account number 1 using the keypad on the Control Panel.
  5. Select the [Configure Account] button. The Configure User Accounts screen will be displayed.
  6. Press the [Clear C] button (several times, as required) on the Control Panel to clear the old password.
  7. Enter the new password using the keypad on the Control Panel.
  8. If necessary, place a check mark in the [System Administrator (Admin)] and [Account Administrator] check boxes, and then select [Save Account].
  9. Select [Close].
  10. Press the [Log In / Out] button on the Control Panel.
  11. Select [Logout] on the Touch Screen.

Apr 04, 2014 | Xerox WorkCentre M-24 Color Copier

2 Answers

Xerox WorkCentre M128 hard reset


Yes! what you will need to do is...

Hold down the [0] for 7 seconds and press [start] without releasing the [0]
you will be prompted for a password. enter [6789] and press confirm
select system settings followed by administrator log in/set up and change the password back to [11111]

hope this helps!

Jul 04, 2012 | Xerox WorkCentre M128 Copier

1 Answer

What is the default password for the Xerox workcentre 24?


It looks like the username and password are both 'admin', and if that doesn't work it might be '11111'.
I found the manual here, which might help for future problems: http://download.support.xerox.com/pub/docs/WCM24/userdocs/any-os/en/WCM24_Quick_Connect_Guide.pdf

Mar 03, 2011 | Xerox Workcentre M24 Color Copier

1 Answer

Need to reset my xerox pro128 password


Here is how you reset the system admin password.

1) Enter Diagnostics as normal (press 0 wait 5 secs. Then hit the Start Button, then select 6 7 8 9 and Confirm)
2) Select Log In/Out
3) Select System Administrator Settings
4) Select System Administrator Login ID
5) Select Keyboard and enter 5 1's ( 11111 )
6) Select Save
7) Select Keyboard again and re-enter 5 1's ( 11111 )
8) Select Save
9) Select Save again
10) Then Select Close and finally Exit
11) POPO to make sure change took effect
At this point the customer should be able to login to customer tools by entering 11111 on the UI.

Jan 28, 2011 | Xerox WorkCentre PRO 128 Copier

1 Answer

How do i change the number of rings for xerox workcenter 123 to pick up for receiving fax


  1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
  2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
  3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.

    NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.

  4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
  5. Select [System Settings] twice. The System Settings screen will be displayed.
  6. Select [Fax Mode Settings]. The Fax Mode Settings screen will be displayed.
  7. Select [Fax Defaults]. The Fax Defaults screen will be displayed
You wll then see locations to set the amount of rings to answer, ECM mode etc.

Jul 23, 2010 | Xerox WorkCentre M128 Copier

1 Answer

I have Xerox workcentre pro 128 copier machine and we don't know what the user name and password is. It was reset from default


Service will have to come reset it. If you changed it from the default of login: 11111 and password of x-admin

Sep 02, 2009 | Xerox WorkCentre PRO 128 Copier

2 Answers

Centreware password on Xerox 7335


On mine it was the other way around username 11111 & Password x-admin

Jan 21, 2009 | Xerox DocuPrint 4517 Laser Printer

2 Answers

Fuji xerox document centre C250


Press machine log in button, enter 11111 confirm, this will take you to sys admin mode, from here you can navigate into sys settings to configure network,copy and fax defaults, and also auditron admin if this is the password mentioned, if the 11111 password has been changed hold the zero button for a few seconds then press start while still holding zero enter 6789 to get into diagnostics, and you can navigate through to the above settings caution be careful what you change in this mode.

Aug 02, 2008 | Xerox WorkCentre M123 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...