Question about Canon PIXMA MP150 All-In-One InkJet Printer

1 Answer

Catridge is not recognize to te printer.. even i bought a new one..

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

This is actually a very easy fix. Two absorber pads are located on the right side of the printer, under the ink cartridges. With the printer on, lift the top to expose the cartridges. They will automatically move out of the way. You can move them to the left side by hand if the printer is not on. You will probably need a flashlight to see the pads. They each sit in a rubber retainer. The pads can be removed very easily and cleaned. Take the pads out of the retainers with tweezers. They clean up nicely with warm water but you can use something like Simple Green if they are stubborn. It is best to use a spray bottle (on stream) and blast it through the pad until it is white. Sometimes just putting it under a running faucet will do the trick. If there is ink in the rubber retainer after taking the pad out, it can be cleaned up with a paper towel. Put the pads back into the retainers and you have successfully cleaned the ink absorbers.

Posted on May 26, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light Flashes all the time when ON and screen says; "replace catridge" even though the ink tank is changed.


Hello, maybe it is not placed well. you have to check on the catridge that is bought, to know if the catridge is well doing on the printer.

Apr 02, 2011 | Canon MultiPASS MP390 All-In-One InkJet...

1 Answer

Tells me ink needs replaced even after putting in new ink.


check your new ink catridge and look for a mini green electronic chip if that is damaged the printer shouldn`t recognize the catridge

May 16, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

I just bought a new canon pixma mx 328, and to save money i bought a refill ink. I forget to refill the ink for two week until it dry out. when i try to print the error uo51 is on the printer screen. i...


Try to reset the printer using this procedure.. might help. turn off the printer..press/hold the stop/reset button..press/hold power button..while holding power button, release the stop/reset button.. then press the stop/reset button twice..release power button..wait until the power button lights a steady/still green and says "idle"... open the cover...take out both catridges.. then turn off the printer. put back the cover then turn on...now put the catridges back.. and wait for 10 seconds then try to print... try this one.

Feb 12, 2010 | Canon PIXMA MX310 All-In-One Printer

1 Answer

My computer is saying that my ink on my printer is out but I just bought the ink today what is going on?What should I do?


Did you buy an original or refilled cartridge??

SOME of the catridges for Pixma will read empty even when new and full. ESPECIALLY the refilled ones.

I would return it to where you bought it along with your printer and test the new cartridge IN THE SHOP.

Jan 31, 2010 | Canon PIXMA iP1600 Printer

1 Answer

What can I do when EPSON does not supply CX4300 Catridges


I bought Epson cx 4300 in Dubai. i could not find any alternative ink for use in india how can i find it in mumbai maharastra india

Mar 04, 2009 | Epson Stylus CX3200 All-In-One InkJet...

1 Answer

Cartridge problem


Please remove the printer catridge and clean the the extra ink in the catridge holder and in the catridge connection point with the soft cloth without damaging the cables in the catridge and the holder then test it

T.Boopathy

Jul 22, 2008 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Epson stylus dx 7450 printer


You have a wide format printer but it has the same basic principle as the desktops. You can buy remanufactured cartridges which were reset for you. Or you can refill them. If you refill them, you need a resetter because Epson cartridges have a chip on them which needs to be reset. Because when they are empty, the printer will recognize it as empty and will not function till you put in a new cartridge. If you bought a remanufactured cartridge, and your printer won't recognize it, you need to go back to who sold you the cartridge and either have them reset it or give you a replacement.

Jun 19, 2008 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Cabling problem??


perhaps that the cable isn't put in the way it should , but it could also well be that you need a chip resetter for epson cartridges to let it recognize the cartridges correctly

Apr 30, 2008 | Epson Stylus C42UX InkJet Printer

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1986 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...