Question about NEC DT330 - - Phone

1 Answer

How do I change the extension name on the display of NEC Univerge DT300?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

* Press SPEAKER key *Dial 700 Enter extension number Use keypad to enter name (up to 12 characters) (note: # = Accepts an entry (only required if two letters on the same key are needed - ex: TOM). Pressing ## = Space.) *Press HOLD *Press SPEAKER key

Posted on Jul 19, 2011

  • 2 more comments 
  • Victor Banke Jan 11, 2013

    THANK YOU, worked perfectly. I just canceled a $200 service order from our shady PBX provider (Pacific Northwest Telco) to come onsite and 'train me' how to do this because of your solution

  • Victor Banke Jan 11, 2013

    THANK YOU, worked perfectly. I just canceled a $200 service order from our shady PBX provider (Pacific Northwest Telco) to come onsite and 'train me' how to do this because of your solution

  • Jerry Feb 21, 2013

    Thanks a lot, Worked fine. I have been looking for this for ages now

  • Matthew Short
    Matthew Short May 26, 2017

    I've had "Ronnie" on my phone forever. Thanks for this!!!!! I'm not Ronnie so......

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my security code on my NEC DT300 phone?


press SPEAKER key *Dial 700 Enter extension number Use keypad to enter name (up to 12 characters) (note: # = Accepts an entry (only required if two letters on the same key are needed - ex: TOM). Pressing ## = Space.) *Press HOLD *Press SPEAKER key

Mar 22, 2017 | NEC Lands Phones

1 Answer

Wanting to extend ring time - changed by itself - only ringing 5-6 times before going to message bank.


5-6 rings I think that is the best you can get
link to a manual for it

SV8100 DT310/DT330/DT710/DT730 User Guide - NEC Corporation ...
https://www.necam.com/Docs/?id=5601ae16-b7e2-4e8c-a769...

NEC-10645 UNIVERGE SV8300 DT300 DT700 USER GUIDE
au.nec.com/.../SV8300_Handset_Manual-ce03fb6c-32af-4991-9bd5-8ec.

Sep 09, 2016 | NEC Dtl-12d dt330 12-button Digital...

2 Answers

Hi I have a Nec DT300 at work. I am on a new desk. Do you know how I can change the name which is on the display.


If you have the Admin password then follow this procedure:
For a DT330 (24-Button with 4 line LCD)
Do not lift the handset and press the Speaker button
Enter #*#*
Enter the 4 digit admin password and press the Transfer button
The phone will now display 'Program Mode'
Select Base from the four options using the associated softkey
Enter 15 and press the select softkey 2 times
The Extension Number and Ext Name will be displayed
Find the Extension Number you want to change the Extension Name for using the + and - softkeys
Press the Mic button to go to the Ext Name line
Enter the New Name using the number dial keypad.
If you make an error the Recall button will delete a character to the left and the Hold button will delete all characters to the right of the cursor.
Press the Transfer button to accept the new name.
Press the Answer button 4 times or until 'Program Mode' is displayed.
Press the Speaker button.
The system will save the changes and return the display to normal.




nec-dt300-work-am-new-desk-know-change-c0rcpkwooamrrv42dhadjir3-4-0.jpg

Feb 14, 2015 | NEC Lands Phones

1 Answer

My NEC DVL(XD)Z-Y (BK)phone has a red blinking light for reception button. No one knows the mailbox code since the receptionist was replaced. How do I reset code or stop light from fast flashing red?


These instruction are for a Univerge-SV8100
To Delete a Security code, the greeting, messages or recorded name in a personal voicemail box:
1. From any phone with Admin rights (Usually ext 101)
2. Press the message button
3. Enter security code if there is one
4. Dial 72 to access System Admin
5. Press SUBS soft-key (in display)
6. Dial the extension number you want to change
7. Press the available softkey in the display or 7 to delete the security code.
Be careful when you are in the admin part of the programming because you can really mess up the voice mail if you do something wrong. To check what type of phone system you have look for a NEC box in your phone room or server room. The complete PDF is here
http://www.integratelecom.com/resources/Assets/sv8100-admin-inmail-master-11-5-07.pdf

Jan 23, 2015 | NEC Lands Phones

1 Answer

NEC DT300 has call light flashing red with no call on the line. How do I make it stop?


PUSH JUST THE BUTTON SPEAKER TWICE
IT MAKES THE HAND FREE CALL YOUR PHONE WAS FORGOTTEN ON FREE HANDS CALL

Oct 20, 2014 | NEC Univerge Dtl-12d-1 680002 Dt300 Refurb...

1 Answer

How to Change Display Name


There is no option for it on your extension because your "class of service" is not set for it. Probably the only extension set for name change is 301 if the default configuration was not changed.

Mar 25, 2017 | NEC DSX 22 Corded Phone

1 Answer

MSG on Display


Once the messeges are cleared, the light will stop blinking.
There should be a button to push, which will allow you to access the messeges options.

Jun 28, 2013 | NEC Univerge Dtl-12d-1 680002 Dt300 Refurb...

1 Answer

Program headset in to NEC DT300 phone


how do i connect head set in nec dt 300 series phone ?
and is there any configuration needed for that ?

Mar 27, 2013 | NEC Univerge Dtl-12d-1 680002 Dt300 Refurb...

1 Answer

How so i change the employee name on phone?


Press speaker key dial 700 Enter extension number (which will be 3 numbers like 101). Use the keypad to enter name (up to 12 characters) use # in between if there is a letter on the same button your just pressed. Press speaker once you've finished typing the name.

Jul 06, 2012 | NEC Dtl-12d dt330 12-button Digital...

Not finding what you are looking for?
NEC DT330 - - Phone Logo

21,339 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Brian LaDuca

Level 2 Expert

149 Answers

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...