Question about Rowenta Commercial Garment Steamer - White

1 Answer

My rowewnta steamer is not producing steam and I have lost the manual

Posted by on

  • 4annebarry May 25, 2011

    this is foe a commercial steamer not an iron

  • 4annebarry May 25, 2011

    this is for a commercial steamer and i need to know how much vinegar, if this is the solution

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

If u have heat and no steam its prolly plugged with salt/calcium deposits, putting white vinager in the water chamber might clear the clog

Posted on May 25, 2011

  • 4annebarry May 25, 2011

    no, this is for a commercial steamer not an iron. I need to know how much vinegar if this is the solution

  • gary enkel May 27, 2011

    use straight white vinegar and heat it like you would with water in it, if you have a salt/calcium build up this might clear it. pins to clear the holes too might get the steam started but use the vinegar

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My rowenta steamer is not producing steam but tubing getting hot when I turn on steamer. Suggestions?


see this causes and fix it. God bless you

If the iron heats but steams improperly, inspect the soleplate and clean the vents (see below) and flush sediment out of the steam chamber .

If the iron produces too much or too little heat, test the electrical cord . Also test and, if needed, adjust calibration of the thermostat .

If the iron does not spray properly, inspect and clean the nozzle.

If the iron leaks or spits, clean the steam vents, nozzle, and tank.

If the iron sticks to fabric, clean or repair the soleplate. If the iron stains fabric, clean the soleplate, clean the tank with a commercial cleaner, and use distilled or filtered water.

Feb 03, 2013 | Rowenta Commercial Garment Steamer - White

1 Answer

Hot hose but no Steam


Don't know this machine but if it has brass jets on the head stick a pin or a needle into them twisting while pushing in and out, some times these jet block up. other wise undo hose and blow through it hope I have helped in some way.

May 19, 2010 | Rowenta Commercial Garment Steamer - White

2 Answers

Hand steamer conair GS15R will not produce steam. It is on, it is full of water, the body gets warm, and it makes noises like it is steaming but nothing comes out.


Hi.

The iron steam lines may be clogged with limescale.

Try first using descaling solution to clean the lines.
Do descaling several times.

If that does not work, then the thermostat may have started malfunctioning and cutting off earlier than normal. This will cause water not getting enough temperature, and iron not steaming.

Try using a descaler product, often that can fix the problem.

Jan 14, 2010 | Conair Irons

2 Answers

My new laurastar steamer is not producing steam at


plse call customer service on 1800 999 910

Nov 13, 2009 | Irons

1 Answer

CGS11DR CONAIR GARMENT STEAMER


Have you checked the float?
Sometimes that gets stuck, or collects mineral and stays in the last position.

Matt

Sep 14, 2009 | Conair Compact Garment Steamer Iron

1 Answer

Everything works except steamer


Hi,
Try using different water...

Here is a tip that will help you with that problem...

My Steam Iron is Leaking Water
http://www.fixya.com/support/r5301301-steam_iron_leaking_water

heatman101

Mar 30, 2009 | Travel Steam Iron EasyGo Steam Iron Iron

1 Answer

When using steam iron i am left with a puddle of water on the floor how do i control the amount of steam


I think is maybe the hose connections. You need to make sure both ends (by the T-nozzle and by the body of the steamer) are secure. You have to align the nozzle with the rod, and push down, and twist. Try watching instructions for connecting both ends on www.HandBookLive.com under appliances category. There are GS4 video instructions and GS10 (this one has just been posted yesterday)
hoe it helps. Otherwise I would return the steamer. Nowhere in the operating instructions does it say that you can control the amount of stream produced...
Laura

Sep 27, 2008 | Conair Compact Garment Steamer Iron

Not finding what you are looking for?
Rowenta Commercial Garment Steamer - White Logo

1,574 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rowenta Irons Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Rowenta Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...