Question about Office Equipment & Supplies

1 Answer

Konica 7145 Fuser Error F34-2

Do You know the reset coded?

Posted by on

  • atendesigns Aug 16, 2008

    I just bought a Konica 7145 at a Auction yesterday and it has an error of F34-2 which is a fuser error. Everyone says so far that there is a by pass code. Does anyone know it?

    Thanks,
    ATEN


  • atendesigns Aug 17, 2008

    Thank you Jason,



    Yes, that is all I had to do is reset the machine and it works fine



    Thanks again,

    ATEN

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 417 Answers

You could go into service mode and reset error count normally to get into the service mode is the following depending on age of machine.

Thanks Jason

A. Procedure
1. Press the Utility/Counter key.
2. Touch [Details] on Meter Count display.
3. Press the following keys in this order.
Stop → 0 → 0 → Stop → 0 → 1

Posted on Aug 17, 2008

  • Jason Collin
    Jason Collin Aug 17, 2008

    If this doesn't work then fuser faulty.

    Thanks Jason


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica 7145 say PM fixing unit (Web) won't copy but will print


have tech come out and replace the web roller above the fuser unit, and clear the counter after install. THAT IS LEGACY MACHINE google for the web roller

Jan 10, 2017 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

How to remove minolta 7135 code E 56-1


replace the image control board, all check all connection to printed circuit board remove each connector seperately and check for a bent pin

Oct 11, 2016 | Konica Minolta Office Equipment & Supplies

1 Answer

How do i fix my copier konica code f-35-3


Power off the machine. Then holding down the 2 and the 5. Power on the machine. When the screen comes on your in Mode 25. Locate soft switch. In the first box you will put a 3, second box put 1, change the third box from 1 to 0. Then power off. Power on if the code comes back your fusing unit (The Hot Part has issues) Do not reset again your resetting the fuser code. The fuser could catch on fire, that would ruin a perfectly good day.

Mar 06, 2015 | Konica Minolta Office Equipment & Supplies

1 Answer

Konica 7145


fuser code hot part replace it

Apr 13, 2014 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

Konica 7145 error code F34-2


do this once code comes back replace the fuser continue reset couls cause fire ruining a perfectly good day


To reset failure codes, perform the following:
1. Enter the 25 mode (turn the machine ON, while pressing the 2 and 5 keys).
2. Select [1. software SW settings].
3. Using the arrows on the left of the touchscreen scroll to DIP SW 3.
4. Using the middle arrows scroll to BIT 1.
5. On the touchscreen select OFF (0).
6. Power the copier OFF/ON.

Dec 30, 2013 | Konica Minolta Office Equipment & Supplies

1 Answer

Appear Please call service F-34-1 kindly help me if know problem this.


with this machine, that code is normally due to worn temp sensors, once they are replaced you can reset the code by:

To reset fuser failure codes, perform the following:
1. Access 25 mode (power OFF, hold the 2 and 5 keys, power ON).
2. Select option 1 [Software SW].
3. Use the scroll arrows to scroll to address 3-1.
4. Select OFF.
5. Power the machine OFF/ON.

the part number for the sensors are p/n 26NA88011

Oct 12, 2013 | Konica Minolta Konica 7145 Minolta Bizhub...

1 Answer

I just ask my copier to try to enlarge past 200%, had really little type on the original. It says "call service" code F-35-1. I work from home and need help to clear out this message. Please...


Fuser error, here is the reset procedure.

Set SW2 (sub power switch) OFF and then back ON, after set to "0" the bit 1 in DIP SW3 in 25 mode. (If you switch power back on without releasing the latch, the error will recur.).

Hope helps.

Sep 02, 2011 | Konica Minolta Office Equipment & Supplies

1 Answer

Sir, i have Konica 7145 machine. i have any 10 mints after F-35-3 error, or some time F-35-9 eroor


Hi the error codes you are getting f-35-9 and f-35-3 are common error codes for this machine
First do not reset the machine using 25 dipswitch 3-1 until you resolve what is wrong
The errors are related to the fuser unit assembly parts f-35-3 is the th1 thermistor f35-9 is also an issue with th1
I can tell you that the thermistors th1 and th2 have been changed a nuber of years ago you will need to replace them both also any other parts in the fuser like the web upper and lower clas adn rollers busings ect there is a fuser kit that you can purchase from konica it comes with all the parts to replace on the fuser unit
when replacing the parts on the fuser unit this must be done by a certified technician only if you are not trained to do this leave it alone
The best option is to replace the fuser unit assembly and have it installed by a certified engineer you will save a lot on labour
Once the new unit or refurb unit is done you will need to switch of machine hold down 2 and 5 at the same time switch on the machine and then go into dipswitch 3-1 and change from 1 to 0

Jan 20, 2011 | Konica Minolta Office Equipment & Supplies

3 Answers

I HAVE A KONICA 7145 COPIER ANND HAVE THE E-56-1 COPIAR


this code means the system control board and the main control board are not communicating with each other. the new main boards have modified to prevent this code. to reset the code turn the main switch on the left side of the machine off for about 10 seconds then back on

Oct 04, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

Error code f35-6 on konica 7145 copier


Replace Thermo- fuse (open ) fuser not getting to 160, and clean thermister, toner builds up between roller and thermister causing overheating of fuse to blow .

Apr 25, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

796 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

71856 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...