Question about 3Com 7760 (3CRWE776075US) 802.11a/b/g Wireless Access Point

Open Question

Hi, I have the following situation: 2 APs (3COM 7760): One is configured in Access Point mode and the other one in Wireless Workgroup Bridge Mode (this one is conected to an IP camera). When I see in the AP (configured as Access Point) the option "System Status/Wireless Station List/Station Status" it recognizes the IP Camera, but when the Rx Data Rate is 65537, the connection to the IP camera gets lost (the AP seems to be blocked), For this reason, it's neccesary to reboot the AP to recover the connectivity. I just wonder if it's a physical or firmware trouble. The firmware version installed is "AP software 1.6.44 Built on Apr 17, 2009" I'm looking forward to your answers :-) Thanks!

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rahul26485
  • 611 Answers

SOURCE: I have 2 3COM 3CRWE454G75 -> AP, it does work in AP repeater mode

find the ip address problem or the firewall of there or proxy servr is there and re-configure it then you get the it and check the region if not same that also creating problem sir,

Posted on Mar 06, 2009

  • 1 Answer

SOURCE: problem using wireless access point to conect desktop PC to WLAN

I have solved the problem:
- first, I had to change the management address in CF-WFAP into address that could be recognized by the router (i used 192.168.1.2),
- DHCP turned off, and set default gateway and DNS to 192.168.1.1. as in router, computer IP was set to 192.168.1.xxx, push "apply", change web address to new one,
- set AP mode to station-infrastructure, push "apply" buton to restart AP,
- set security to same security as in router and copy key into proper field, push "apply" again to reset the AP
- finaly check wireless station around and choose the router (same encription)

Posted on Mar 22, 2009

  • 1 Answer

SOURCE: I'm upgrading firmware of the

i know this was from a while ago but 3com 7760's have a problem when uploading it files either firmwere or setting backup files you have to use internet explorer or you will get the "please input address path" error

Posted on Sep 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Internet connection is fine when my PC's connected directly to the modem. The router connects fine. But won't let the wired PC online. Under the "status" bar the "router" tab won't show the correct...


here are times when there is a need to connect a wired computer to an access point in order to set it up. To connect a wired PC to a Linksys access point, follow the steps below. Step 1:
Connect the PC to the Ethernet port located at the back of the access point.

Step 2:
Assign a static IP address on the computer. For instructions, click here.
NOTE: To assign a static IP address using Mac, click here.
The Access Point can be configured in four different modes:
  • Access Point
  • Access Point Client
  • Wireless Repeater
  • Wireless Bridge
The Access Point mode allows wireless clients to connect to the access point and routes traffic between the wireless and wired interface. Use this mode to create a standard wireless Infrastructure network. For instructions, click here.
The Access Point Client mode allows this device to act as a wireless client. You can connect a wired PC to the access point to connect to a wireless router or another access point wirelessly. You can enter the MAC address of the Access Point or use the Site Survey button to select the Access Point you want to connect.
NOTE: The WAP54G will only communicate with another WAP54G when set to the Access Point Client. For instructions, click here.

Sep 05, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I'm upgrading firmware of the 3com 7760. I'm get from 3com.com and i download a file .img, but in the 3com web interface say "Please Input Address Path for Upload". I selected the file .img. Excuse me...


i know this was from a while ago but 3com 7760's have a problem when uploading it files either firmwere or setting backup files you have to use internet explorer or you will get the "please input address path" error

Aug 04, 2010 | 3Com 7760 (3CRWE776075US) 802.11a/b/g...

1 Answer

D-Link 2000AP+ and 2100AP Bridge configuration


Solution #1
Set the DWL2000AP+ as "Bridge Mode" and the new AP (DWL2100) in "WDS Mode".
On each device set the MAC address of the other device.

Solution #2
Set the DWL2100 as "WDS with AP Mode" and the DWL2000 in "Bridge Mode".
On each device set the MAC address of the other device.

Aug 31, 2009 | D-Link : DWL-2100AP Wireless-G 108Mbps...

1 Answer

I have 2 3COM 3CRWE454G75 -> AP, it does work in AP repeater mode


find the ip address problem or the firewall of there or proxy servr is there and re-configure it then you get the it and check the region if not same that also creating problem sir,

Mar 04, 2009 | 3Com OfficeConnect (3CRWE454G75)...

1 Answer

3Com 7760 (3CRWE776075US) 802.11a/b/g...


Hi there

I think up to now you've been using someone else's Internet service, by picking up the signal wirelessly. You need your own Internet Service. You now connect your access point in the way the Internet Service Provider guide you. It is a different set up with cable (they provide a modem) or with BT (connection through your phone line).

Dec 31, 2008 | 3Com 7760 (3CRWE776075US) 802.11a/b/g...

3 Answers

Repeater


The repeater must be the same brand as the signal it is repeating. Different routers / access points work in slightly different ways and the current generation of wireless repeaters aren't smart enough to work with other brands.

It's kind of like trying to put an engine from a Nissan Altima into a Honda Accord... both make the car move but they aren't the same inside.

Oct 31, 2007 | 3Com OfficeConnect (3CRWE454G75)...

Not finding what you are looking for?

Open Questions:

See all 3Com 7760 (3CRWE776075US) 802.11a/b/g Wireless Questions

3Com 7760 (3CRWE776075US) 802.11a/b/g Wireless Access Point Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

NBX_Tech
NBX_Tech

Level 1 Expert

58 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...