Question about Sony BRAVIA® DAV-HDX576WF Theater System with Wireless Speakers

Open Question

C 3100 error code and tray will not open - Sony BRAVIA® DAV-HDX576WF Theater System with Wireless Speakers

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error code esp-3100


first off delete your pocket express then open web browser and go to http://tinyurl.com/7uttpv3 download and if it asks to replace version 5.4.20 with 5.4.20 click yes and reboot. And the app should start updating correctly. I had to do this twice before getting it to update correct.

Feb 02, 2012 | RIM BlackBerry? Curve 8330 Cellular Phone

1 Answer

How to open line nokia 3100


you can open line your 3100 phone through codes. you can get the codes from either your service provider or from other online providers like Unlocking4U.com

Nov 14, 2011 | Nokia 3100

1 Answer

A paper jam was not cleared in a timely manner, now the machine will only display "Error Code C0202, Call Technician" It is Saturday and I can not get a hold of anyone at our support center. How can I...


C0202= tray 1 elevator failure.
Open tray 1, check and make sure paper is loaded correctly.
With tray open, open and close front door. This will reset error code. With tray 1 open look to see if paper is stuck behind tray in back of machine, if so remove it ( this will block the lift motor for the tray).
Close tray 1, if you hear a popping noise the lift motor is damaged and will have to be replaced. Until it is replaced operate machine with tray 1 out to prevent error code.

Sep 18, 2010 | Konica Minolta Bizhub 362 Copier

1 Answer

Cd drawer will not open


Please try these.. hope any one might open the tray..

1. use a thin needle to insert in the pin hole near the CD tray.

2. my computer--> cd drive--> right click&press eject

Feb 28, 2010 | Dell Dimension 3100 PC Desktop

1 Answer

C-0991 error on screen


First problem is for some reason your KMC 3130 crosses over to a Konica Minolta CF3102 and there is no C-0991 code listed for those machines. However, that C-0991 code is a common paper tray lift failure code on Konica MInolta machines.
So I would recommend opening and checking all of your paper trays to make sure nothing is binding them and that the paper is loaded properly.
Then open and close the large front door to reset the code.
If the code comes back then open all of your paper trays and LEAVE them open. Next open and close the front door to reset the code. The copier should now come to "ready to copy"
Then close each paper tray 1 at a time waiting 30 seconds between each tray closing. Once the code pops back up after closing a particular tray then you will know for sure which tray is causing the problem.
You can use the copier by leaving this tray open if need be.
Good Luck.

Nov 24, 2009 | Kyocera Mita KYOCERA/MITA - KM-C3130...

1 Answer

I have problem of code c-910 how can i solove it


You did not provide the make or model number but based on the code I will suggest a solution for a Konica/Minolta and a CO910 code. This error code means your 2nd paper tray id not lifting properly. I woul;d suggest opening tray 2 and removing, then reloading the paper in that tray. If this does not work you can verify this is the problem by leaving tray 2 open and then opening and closing the front door to reset the code. If the machine comes to ready and can make copies with tray 2 open the you will know there is an issue with tray2. You can leave the tray open to allow you to make copies until repairs can be made.
Good Luck.

Nov 02, 2009 | Office Equipment & Supplies

2 Answers

Ir3100 : E00070-003 error code


canon ir 3100 error code E00070-003

Oct 23, 2009 | Canon imageRUNNER C3200 Copier

2 Answers

C0920


Paper Tray Lift error code. Check and reload all the paper in all the trays. Power off then on to reset. If this does not solve the code then pull out all paper trays. Reset machine leaving alll trays OPEN. Close the trays 1 at a time waiting 30 seconds between each tray closing. If the code comes back after closing a tray then that will tell you which tray has the problem. You can leave that tray open so you can use the machine and also you can check that tray more closely.

Oct 21, 2009 | Minolta Di3510f Bizhub Copier

1 Answer

Displays F6 error code, hums when you start it and the tray circulates when you open the door


Depending upon which make and model you have, F6 is the code for either relay failure or shorted tempurature probe.

May 01, 2009 | Microwave Ovens

2 Answers

Error Code E580


Error Code E580 relates to these below:


• The stack tray lifter motor (M5) is
faulty.
• The stack tray paper height sensor
(S10) is faulty or the harness
connector is disconnected or has an
open circuit.
• The stack tray lifter motor clock
sensor (S9) is faulty, or the connector
is disconnected or has an open circuit.
• The stack tray lifter motor load is
faulty.
• The finisher controller PC is faulty.

Dec 07, 2007 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
Sony BRAVIA® DAV-HDX576WF Theater System with Wireless Speakers Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...