Question about Whirlpool DU1055XTV 24 in Builtin Dishwasher

1 Answer

Hi, I have a brand new quiet partner 2, the model number du1055xtvq3, it stopped during the normal cycle and the normal and cancel lights flash at the same time. None of the buttons respond when pushed.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 239 Answers

Unfortunately, the touch panel has experienced a failure. You can try disconnecting the power for a bout 5 minutes to see if it resets, but I doubt it will. The touch pad will likely need to be replaced. I will need the rest of the model number to give you the correct part information.

Kelly

Posted on May 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cancel light blinking


this normally indicates an error code, what is the make and model number? also which lights are flashing?

Oct 02, 2014 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Whirlpool quiet partner II starts and stops. What should I check?


the first thing to do is unplug it for 3 minutes then check to see if it reset by running

Jan 07, 2018 | Whirlpool 24 in. DU951PWB Free-standing...

1 Answer

I have a whirlpool quiet partner II dishwasher model # DU1055XTVB5 and the normal light is steady flashing I have did the sequence to reset HEATED DRY NORMAL HEATED DRY NORMAL and the normal light...


Angelia:
Thank you for your review.
We would like to inquire further about your review with you. Please respond back to this email address, Whirlpool_Reviews@Whirlpool.com, with your name, phone number, street address, zip code, model & serial number, and date of purchase on the appliance.
We look forward to your reply.
Thank you,
Whirlpool® Social Media Relations

Mar 06, 2018 | Whirlpool 24 in. DU1055XTP Built-in...

1 Answer

Whirlpool quiet partner 2 DU1345XTVB2 Normal and Cancel lights flash continuously


WP has great on line trouble shooting, have you tried their own onsite trouble shooting listing the exact problem and model?

Jul 10, 2012 | Whirlpool Dishwashers

2 Answers

Whirpool dishwasher quiet partner 2 clean light blinking wont cancel or run a cycle


Hello,

press normal heated dryer normal heated dry normal the dishwasher should reset and start. You will need to check the heater this happens because the heater normally fails. Let me know,

http://www.appliancerepairlesson.com/

Mar 07, 2011 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Dishwasher takes 3 hours to wash, even on the light cycle


whirlpool Quiet partner 3 the clean light is flashing 7 times what does this mean

Mar 12, 2010 | Whirlpool Dishwashers

1 Answer

Whirlpool Quiet Partner 980


Bad control board ,replace it.

May 26, 2008 | Dishwashers

1 Answer

Whirlpool Quiet Partner 980


clean light blinkin???? ry pushing the sanirinse-heated dry--sanirinse--heated dry. tha tshould put in diagnostic mode, there also should be a trouble shooter underthe lower acess panel

Apr 09, 2008 | Dishwashers

7 Answers

Whirlpool gold- quiet partner III


An angel of mercy on another blog posted this solution and it worked for me as well. My Whirlpool Quiet Partner Dishwasher would not work due to the CLEAN light flashing in 7 interval sequences. I followed these steps and my dishwasher is not working perfectly...hope it works for you:

"Well for mine which is a Whirlpool Gold Model # GU2400XTPS3, I found the seq of buttons that I had to push to reset the curcuit board. I think it may of been in this forum somewhere. But I had to push - Sani Rinse, Heated Dry, Sani Rinse, Heated Dry, and then the dishwasher went through it's diagnostic cycle and then after that the light stopped blinking and the dishwasher works great. Supposily, there is a Product Tech Sheet behide the kick panel of every dishwasher, but mine was gone so I had to find the information on the internet. You might want to do a serach for the correct seq of buttons you have to push to reset the curcuit board. If you know for sure that the heating element is bad, you will have to order one. "

Mar 04, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

9 Answers

Whirlpool gu2400xtpt3


I too had Flashing Clean light and only responded to Cancel light by trying to drain. Whirlpool Model DU1145. I too got problem to clear by pushing High temp,Heated dry, High temp and Heated dry. All lights on display lit up then it went through sequences of all cycles.

May 14, 2006 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool DU1055XTV 24 in Builtin Dishwasher Logo

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Mike

Level 3 Expert

4349 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...