Question about Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

1 Answer

I have a two drawer Fisher and Paykel dishwasher. The lower drawer initially displayed an F1 and now shows nothing. It does not currently display a message even after starting it. It does not appear to engage at all - no water is released into the washer.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 552 Answers

Hello,

This is a flood error code. The bottom drawer needs to be removed to dry up the water. The video below explains how to do this. It's actually pretty easy.

Posted on May 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher & paykel fault "F1" is displayed on the top


hello
F1 means the flood sensor senses water at base of machine at PC board.
You need to take out bottom drawer and check for water puddle under where the drawer was.If there is water you can get the machine going again by comletely drying it out(F1WILL CLEAR),but it still means you have a leak.With bottom drawer out you can really see whats going on.Once F1 is clear you can actually run upper drawer and see if it leaks.Most likely culprit are the lid actuators.Replace all 4 . It'll run like new.Don't overload drawer .That can cause lid leak too.Also the PC board may be damaged and may start to go crazy giving fake F1 codes.$80 easy fix.
good luck

Jul 27, 2011 | Fisher and Paykel 23 in. DD603H SS...

1 Answer

Top drawer does not work and bottom drawer flashes on and off


Hi,
I would need more information to assist you. Drawers run and act independent of each other, the only share to things, drain hose as they connect to each other under the sink, and the power board in which also detects water in base pan. If you have a digital display, what is currently displayed? You lower drawer flashes? What is it flashing F1? F1 is a flood in base pan, F2 is a bad motor. I would need some more detailed information to assist you. Also does you model have panel like wood? This would mean you don't have a digital display.
Please get back to me so I can help you

Jul 22, 2011 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

F1 in F&P 2 drawer dishwasher


You will need to be a bit more specific when you say "no flood".

Are you having this F1 fault in one or both drawers?

What did the engineer do when he was there last time?

Does the F1 code flash with beeps?

What happens when you turn the mains power off and on after a short delay?

Please provide the actual model number of your fisher and paykel 2 drawer dishwasher.

May 19, 2010 | Fisher and Paykel Dishwashers

2 Answers

Our dishwasher displays F1 with a wrench???


check the water pressure is coming through first

Mar 09, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

Fisher Paykel DD603 Problem. Top drawer shows F1 and pump runs continuously. Lower drawer does nothing, no display. I think the Electronic Controller in lower drawer is fried and maybe the Mains Filter...


Yup, definately the bottom drawer controller, for some reason you can run a DD603 with no board in the top, so long as you have a board in the bottom, but not the other way around. This is the fault you get, constant F1 from the top drawer. If you are stuck try removing the display cable from the bottom controller, this may help, so long as you leave the chassis harness in.

Sep 26, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Both drawers are flashing and beeping, displaying the message F1 with a wrench symbol underneath. If turned off, they come back on after a few seconds,


Fisher and Paykel 24 in. DD-602 Built-in Dishwasher Both drawers are flashing and beeping, displaying Answer Both drawers are flashing and beeping, displaying the message F1 with a wrench symbol underneath. If... (More) Both drawers are flashing and beeping, displaying the message F1 with a wrench symbol underneath. If turned off, they come back on after a few seconds,

Sep 23, 2009 | Fisher and Paykel 24 in. DD-602 Built-in...

1 Answer

E-mail for Fisher Paykel DD603 manual


Josh, you will need to have a Tech out to look at it... F/P will not sell you parts to repair it. The F1 indicates that the flood switch has been tripped. There are many possible causes for this but probably the upper drawer link support has broken and is getting stuck between the lid and the drawer in which case you will need a new lid and link support.

May 05, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

3 Answers

Fisher & Paykel dishwasher:


Turn off dishwasher's circt braker at distribution panel (usaly located in garage or in basement)
1. Open lower drawer
2. Push in two plastic buttons at front lower corners.
3. Remove drawer from railing
4. Remove water from bottom of dishwasher
5. Use hair drier to dry off bottom copartment, specialy in left corner at floding switch location.
6. Install drawer on the rail in position when plastic buttons pup up

Mar 27, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

F1 problem on Fischer and Paykel Dishwasher.


NO POWER TO LOWER DRAWER, CHECK POWER AT BOARD IN LOWER BACK CORNER BEHIND DRAWER,CHECK FOR BROKEN WIRE TO LOWER DRAWER,CAN ALSO BE THERMAL FUSE ON HEATER PLATE,COULD ALSO BE CONTROL BOARD IN LOWER DRAWER.GOOD LUCK there is a drawing taped inside behind the drawer. oops sorry about all caps prideapplianceser@sti.net

Dec 29, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Fisher & Paykel single drawer dishwasher F1 flashing.


F1 indicates a problem with the Flood sensor. I cleaned all the filters etc. removed the drawer viewed under the drawer, it was dry. There is nothing further I can do, so called the Appliances repair person and booked an appointment for him to determine if an outlet hose is blocked or has a hole in it or whatever. Thanks for all the suggestions Blokes. I'm technically challenged. Happy New Year

Dec 28, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

Not finding what you are looking for?
Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher Logo

1,034 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Brian Coughlan

Level 2 Expert

275 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...