Question about MSI Computers & Internet

1 Answer

Hi I bought a new pci express x16EN 1210 Silence installed it in my pc worked fine was Then i moved the computer and tower and the monitor does not want to come on. Says power save mode and powers off. I unplugged the power for a few minutes like the store told me to do and still no monitor.The monitor is LG cannot remember the model and not home to check it. What can i do

Posted by on

  • 1 more comment 
  • cpenzes680 May 25, 2011

    I should also mentioned it was moved to a different home from where it was setup but the monitor came on we shutdown unplugged it now nothing also new power supply

  • cpenzes680 May 25, 2011

    Yes i did all that was on the computer all day
    was working great,Then whe n i took it home the monitor will not work.
    Same monitor was setup on.
    Is there anyway to boot from cd and reinstall the drivers
    The only thing we changed was the mouse.It was wireless now its plugged in.The computer worked fine until moving it and using a different mouse

  • cpenzes680 May 25, 2011

    I set it up with a usb keyboard and when i moved it home i turned it on and worked.Realized i forgot to plug keyboard in onboard.Shutdown did that and no video display.
    Can the onboard keyboard have anything to do with it.Thats why i bought the pci express i unplugged my wireless keyboard cause it broke.Plugged my regular keyboard in turned pc on and no display..Thought my onboard display had gone.
    Should i get a usb keyboard



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

Hi there,

When you installed the software, the first thing you should see on the monitor is the change in the resolution,contrast,hue etc and it should ask you if you agree or not.
The software comes with a manual and the manual should tell you what PC (windows Xp, 7, vista etc) is compatible for it.



Posted on May 25, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Just trying to find out whether this computer will take a PCI sound card.

The this particular model of the computer has one spare PCI express slot , where an external audio card can be put in. Open the the system tower and look for an empty black slot on the motherboard.

You can purchase a PCI express sound card .


Oct 03, 2012 | eMachines ET1161-05 PC Desktop

1 Answer

I start up my pc and get no signal to the monitor i have bought new leads for monitor cleaned out the pc.but i can only get a signal to the upper port on the tower please help i av bought a new graphics...

You will have to go into BiOS and change the graphics settings from on board graphics to PCI, AGP, or Pci-e depending on what kind of graphics card you have. It will be one of the 3 listed, if your computer is relatively new it's more than likely PCI-e, If it's fairly old it could be one of the other 2.

Feb 01, 2011 | Acer Computers & Internet

1 Answer

My integrated video card died so I bought a compatible new video card GeForce 7200 pci express. Monitor doesn't work with new card because the drivers for the old card haven't been uninstalled. I am going...

does your motherboard identify your new video card? make sure to put the new video card on the right slot. then check all the cables which is connected on your monitor going to the tower. make sure to connect the vga cable of the monitor to your new video card. try to power on computer and install the video card driver which comes with your new video card.

Apr 01, 2010 | Gateway GT5056 PC Desktop

1 Answer

Graphic card ati 1650 pci express on boot up stopped working

Either your graphics card has gone bad or - the PCI Express slot on the motherboard has failed. Alternately you could put the card in another computer and see if it works. you could take it to a local pc shop and have it tested. I work for TechSupportPros of Spokane, WA - I would test the card for free.

Feb 05, 2010 | Computers & Internet

2 Answers

There is no signal getting to from my computer to the monitor - Help... I have replaced the cord, but it did not work. The monitor is working fine as I hooked it up to another computer. Tries the opposite...

It is the video card!
So, when you plug the monitor in to the rear of the eMachine case, do you connect it in the aread where the keyboard mouse and USB and sound conntors are OR do you connect to the area when all the expansion slot covers are?

If you answered YES to the first part of the question, then the video signal comes from an 'integrated' video card that is part of the mainboard. This is bad. Contact eMachines in order todetermine if the system will allow a video card to be installed in an expansion slot...

If the second part of the quetion is YES, this is better. You can replace the video card andprobably be OK. Get you teenager to open up the case and pull out the video card. You need a new one but they come in multiple 'types' so you need some to have look at it and sell you another compatible one.

Oct 13, 2009 | eMachines W3611 PC Desktop

1 Answer

Blank screen after turning computer on

Sounds like onboard video might have gone out. 2 suggestions, if the system is still underwarranty, send in for repair. If not, suggestion would be to open the case, and confirm type of slots AGP, PCI, PCI Express, and purchase a video card on the type to install.

Jun 01, 2009 | Dell Dimension E521 PC Desktop

1 Answer

Can't get Picture on Monitor, replaced video card

Boot up into the setup, usually F2- in the video section look to be able to make a change from Onboard to PCI ...apply-save change and exit ...also make sure you have connected the monitor to the correct area...I , like a big dummy, have often just hooked it up to the first blue socket i saw and of course...not much happens.
I hope this helps you Fred, (if it came with drivers install them)
please leave rating, thank you kindly

May 04, 2009 | HP Compaq Presario Media Center SR1750NX...

1 Answer

No video signal

The video card may have a jumper next to it or it need to be reset in bios If you know how at start up prees F1 or F2 or Del one of these will open Bios in the bios menu you will see setup instructions on the side or the bottom follow them and save if you are trying to add a video card it should say onboard or pci slect pci then press esc on your keyboard then press F10 to save settings then restart pc this should work but check the hp website for downloads get the manuel and find out about the video jumpers.

Apr 07, 2009 | HP Compaq Presario SR1720NX (EL435AA) PC...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts


Level 2 Expert

73 Answers

Alun Cox

Level 3 Expert

2678 Answers


Level 3 Expert

781 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides