Question about Mitel 5212 IP Phone

1 Answer

Mitel Phones throughout the property are trying to get re-booted and all that is displayed is an IP address on line one then "Downloading....60" on line two. After this downloading process gets to 80, the Mitel phone starts booting the inforamation all over again from scratch. What do I do??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 378 Answers

The unfortunate thing here is there is a network disruption caused by the network not set up properly to support VoIP or a problem on the network.
The file it's trying to pull from the phone system is very small, and it uses TFTP. If there's a disruption in the download, it will cause the set to reboot.

You need to contact your system admin or your telephone system vendor and your network admin/vendor to have it resolved.

Posted on Jun 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get a second hand Mitel 5215 to accept an IP address?


Your phone needs an IP address in order to communicate. Normally, it asks a "host" for that IP. You need to be connected to the internet for it to connect to the normal host, and your router should be willing to give it that IP address. "DHCP" is how devices ask for and get an IP address.

May 11, 2015 | Mitel 5215 IP Phone

1 Answer

Phone is displaying DHCP:discovery boot ver 02.01.00.04. Mitel phone was working perfectly until router changed to BT Hub. What can I do to resolve it?


You can download the TNA analyzer to test ports. Or your router is not giving dhcp to the phone. You can try to statically assign an IP address to. The phone.

Feb 18, 2013 | Mitel 5224 IP Phone

1 Answer

How do I reboot my mitel 5212 ip phone


Try unplugging the phone line on the base of the phone and replugging it.

Sep 19, 2012 | Mitel 5212 IP Phone

1 Answer

Hi, I need to set the IP configuration on my MITEL 5212 IP Phone manually, but I do not know how to do it. I guess that there is a sequence of key to press, any help will be appreciated.


Press and hold the up arrow key while booting the phone. Configure telephone - YES, Network Parameters - yes, then NO until you see Change. Set the appropriate information, IP address, default gateway, ICP IP address, TFTP server address, etc.

You should be warned that this gains nothing except making another device on the network that requires deliberate management.

- Mark

Feb 02, 2011 | Mitel 5212 IP Phone

1 Answer

Had a mitel 5010 ip phone....when i connect tge poser supply to the phone it says...." 10.9.170.227 booting ver 5.26" and does not do anything.....i want to connect the phone to a line in my...


I'm sorry, but this IP telephone cannot be used without a telephone system. It's not intended to be used in a home with a Home telephone line.

Dec 22, 2010 | Mitel 5010 IP Phone

1 Answer

I was using Mitel phone, model ( 5220) some where else, now i removed this Mitel phone this place and i want to configure it another place, but problem which i am facing, when i insert network cable on it...


log into the phone system and remove the MAC address from the old extension. Add the MAC address to the new extension or PIN it after it boots up.

Aug 31, 2010 | Mitel 5220 IP Phone

1 Answer

I have Netgear N router and having problems trying to establish phone connection with my Mitel 5312 ip phone. I have fowarded all the ports, disabled router firewall powercycle everthing a thousand times...


The phone is intended to be connected to a Mitel PBX telephone system. If you're using the phone at home, you must set the phone in Teleworker mode and use the IP address of the teleworker server. This will allow your phone to tunnel into the phone system.

OR the phone must be set up in SIP mode. Press and hold the 6 key while booting the phone. You will also need to set it up and tell it where the SIP server is located (IP addresses).

If you don't have this information, you should contact your vendor or system admin for further assistance.

If you are trying to use the phone without the above servers, I have bad news - it won't work.

Apr 07, 2010 | NetGear MR314 802.11b

2 Answers

Mitel 5550 Console cannot obtain ip address.


Follow the proper boot-up sequence in the manual, and verify the PC boots up on the native lan first.

Oct 06, 2009 | Mitel Computers & Internet

1 Answer

Trying to change passcode on Mitel 5215: worker has left without letting us know the code! Have put phone IP address into IE address bar but only get "page cannot be displayed". How do I access...


The voicemail passcode. It's a 5215. I read the manual that says you can reset passwords by putting the phone's IP address into your web browser, but that just gives me "page cannot be displayed". Don't know what to do next.

Sep 15, 2008 | Mitel Lands Phones

Not finding what you are looking for?
Mitel 5212 IP Phone Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitel Computers & Internet Experts

Martin Murray

Level 3 Expert

1623 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Kelley Hopper

Level 2 Expert

60 Answers

Are you a Mitel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...