Question about Citizen Eco-Drive BL006056H Wrist Watch

1 Answer

Model BMXXXX/Cal. No.E11X, E10X Date and day changing at wrong time, (around 4 P.M. daily

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,940 Answers

I would first try to reset the watch, and then reset the time and date.

How to Reset:
When affected by static electricity or hard shocks, watch indications may go wrong. In such a case, apply an all reset and the following base position adjustment. All reset is available from the state or insufficient recharging warning, time setting warning or power save.
1. Pull the crown twice (time setting position)
• The second hand moves to a zero position it memorizes and stops.
2. Press button A 2 seconds or longer and release.
• The hour and minute hands perform a demonstrative movement of "forwarding ? reversing ? forwarding."
• The second hand makes a full forward turn. Now all reset is completed. Be sure to make base position adjustment after all resetting. If omitted, display positions of watch hands and date as well as the date changing time may go wrong.
(Note 1) Do not apply all reset during date changing. Should dislocation occur, pull the crown once after all resetting, and with button A pressed, turn the crown left and correct the date position.
(Note 2) The demonstrative movement is not done when recharging is required. Recharge the solar cell thoroughly and then do all reset.

Setting the Time
1. Pull the crown twice to the time correction position, and then the second hand advances rapidly to the zero-second position and stops.
(Note 1) If the crown is pulled twice while the data is changing, the second hand advances rapidly to the zero-second position after the date change.
(Note 2) If the second hand does not stop at the zero-second position, do all reset and then adjust the base position.
2. Set the time by click-turning the crown:

  • A click to the right, the hour and minute hands move forward.
  • A click to the left, the hour and minute hands move backward.
• When the crown is moved quickly (two or more clicks at a time), the hour and minute hands advance rapidly. Click the crown through one turn in either direction to stop rapid movement.
(Note 1) When the hour and minute hands reach 12.00am, the date changes. (Hour and minute hands wait at 12.00am while the date is changing, and resume operation after the date change.)
(Note 2) In the case of reversing, the date does not change, even when the hour and minute hands pass 12.00 am.

3. Set the time by a time signal and then return the crown to the normal position.

Setting the Calendar
• The calendar is of the perpetual type that automatically changes year/month/day including the leap year, once it is set.
1. Pull the crown once to the calendar correction position, and then the second hand moves to a year/month position it memorises and stops.
(Note) If the crown is pulled once while the date is changing, the second hand advances rapidly after the date change.

If the problem still persists, there may be internal damage to the watch, etc. Contact Citizen Watches for repairs, or contact the place you purchased the watch from. Get your watch serviced by Citizen Watches here:
http://www.citizenwatch.com/CUK/English/service.asp

Here is your manual:
http://www.fixya.com/support/p140303-citizen_eco_drive_bl006056h_wrist_watch/manual-1596#

Posted on May 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with day/date changes! My casio edifice


follow these instructions off the manual below if you set the watch in wrong sequens it wont change at 12 oclock
http://support.casio.com/en/manual/009/qw5125.pdfhttp://support.casio.com/en/manual/009/qw5125.pdf

Sep 27, 2013 | Watches

Tip

How To Set The Time/Calendar For Your Seiko Watch


<span style="font-weight: bold;">Time Setting for Models Without Calendar</span><br /><span style="font-style: italic;">Note: When setting the minute hand of a quartz watch, advance it a few minutes ahead of the time and then turn it back to the exact time.</span><br /> <ol> <li>Pull out the crown all the way. <span style="font-style: italic;">Note: If your watch has three hands, pull out the crown when the second hand is pointing to 12 o'clock.</span></li> <li>Adjust the time by turning the crown in the desired direction.</li> <li>Push the crown back in to the normal position.<span style="font-style: italic;"> Note: If your watch has three hands, push the crown back in to the normal position in accordance with a time signal for "00" seconds.</span></li></ol><span style="font-weight: bold;">Time/Calendar Setting for Models With Calendar</span><br /><span style="font-style: italic;">Note: The date will change gradually between 9:00 PM and 4:00 AM. For some models, however, it will change instantly when the hands pass the 12 o'clock marker at midnight.</span><br /> <ul style="font-weight: bold;"> <li>For models with date calendar</li></ul> <ol> <li>Pull out the crown to the first click.</li> <li>Turn the crown until the previous day's date appears in the calendar frame.</li> <li>Pull out the crown to the second click, and advance the hour and minute hands until the desired date appears. <span style="font-style: italic;">Note: If your watch has three hands, pull out the crown when the second hand is pointing to 12 o'clock.</span></li> <li>Adjust the time by turning the crown in the desired direction.</li> <li>Push the crown back in to the normal position.<span style="font-style: italic;"> Note: If your watch has three hands, push the crown back in to the normal position in accordance with a time signal for "00" seconds.</span></li></ol> <ul style="font-weight: bold;"> <li>For models with day and date calendar</li></ul> <ol> <li>Pull out the crown to the first click.</li> <li>Turn the crown until the previous day's date appears in the calendar frame.</li> <li>Turn the crown in the opposite direction until the desired language (bilingual) for the day before the desired day appears in the calendar frame. <span style="font-style: italic;">Note: For Cal. 7009 and 7019, push the crown back in to the normal position and then push it repeatedly to set the day.</span><br /></li> <li>Pull out the crown to the second click, and advance the hour and minute hands until the desired date and day appears. <span style="font-style: italic;">Note: If your watch has three hands, pull out the crown when the second hand is pointing to 12 o'clock.</span></li> <li>Adjust the time by turning the crown in the desired direction.</li> <li>Push the crown back in to the normal position.<span style="font-style: italic;"> Note: If your watch has three hands, push the crown back in to the normal position in accordance with a time signal for "00" seconds.</span></li></ol><span style="font-weight: bold;">Note:</span> Do not change the calendar between 9:00 PM and 4:00 AM as it may not change properly. If it is necessary to set the calendar during that time period, first change the time to any time outside those hours, set the calendar and then reset the correct time. When the day shifts automatically to the next day, the other language will temporarily appear.<br /><br /><span style="font-weight: bold;">Note:</span> When setting the hour hand, check that AM/PM is correctly set. The watch is designed so that the calendar changes once in 24 hours.<br /><span style="font-style: italic;">Turn the hands past the 12 o'clock marker to determine whether the time is set for the AM or PM period. If the calendar changes, the time is set for the AM period. If it does not change, the time is set for the PM period.</span><br />

on Feb 15, 2011 | Watches

1 Answer

How can I change the day on the watch (timex model T2E581). I am able to change the date and time ok, but not the day. Thanks for the help.


When you pull the stem out all the way (two clicks) it should set the time. Pulling the stem out one click you noticed sets the date, you turn it one way for the date and in the same postion you turn it the other way for the day. For some reason on some watches the day will stick, if that still happens you will need to turn the hands around and around until you get to the right day, then keeping in mind the 12 hour interval you are in... set the date and time. If the day still does not change then you need to return the watch if its new or send it to timex! Caution: when sending a watch to Timex sometimes they send back a different watch without asking so if its sentimental do NOT send it to Timex!! Hope this helps! have a great day!

Sep 19, 2011 | Timex T2E581 Watch for Men

1 Answer

How to set day and date on a Benrus quartz watch model # BN529? Has one stem with two pull out positions. The first position only changes date going only in direction.


Typically, you need to run the time around until the right day is up and the right time is set to am or pm. Then turn in the other stem position until the correct date shows up.

Jun 26, 2011 | Watches

1 Answer

How do i set the day (Mon-Sun) on my ax2013 watch?


When you pull the crown out there are two positions. The first is the day/date setting position. Turn the crown one way and the date changes, the other direction the day of the week changes. Set both the day and date to yesterday. It will become evident why when you finish. Now pull the crown all the way out and notice when you turn the crown the hands move. Advance the hands to the 12 o'clock position in a clockwise direction. As you pass 12 the date may begin to change. If not then you now know that was noon and not midnight because the date only changes at midnight. If the date did not change advance the hands all the way around 12 hours. This will now be midnight and the date should begin to change. It may be almost instantaneous or may take until 12:30 or so. Continue advancing the hands to 4 o'clock. You should see between midnight and 4 the day of the week advance. Now the day/date are correct for today and the final step is to set the correct time. Remember, you are now set a 4 AM. Advance the hands to the correct time. That means if it is 3 in the afternoon, you must advance past noon to 3. You cannot go backwards. That would be 3 AM!

Mar 24, 2011 | Giorgio Armani A|X Armani Exchange Black...

1 Answer

I have an eco drive and recently in trying to set the clock back to regular time, I must have done something wrong. The time is correct but the date, and day are one day forward. How do I correct this?


the crown of the watch has two clicks, pull it gently once and you can set the date and day, pull it gently again a second time and you can set the time. The proper way to set the time and date is to set first the day,date late at the actual date, then move the hands around the clock until the date change at 12 oclock this is evening, then moving the hands around until you reach the actual time. By doing so you will set the day, date and time in syn to 24 hrs change.

example: you want to change it to sat 12th 11am
set the day and date to fri 11th
then move the hands around clockwise until the day and date change at 12 oclock continue moving the hands until you reach 11am

Dec 13, 2010 | Citizen Eco-Drive watch

1 Answer

Date Changes during the day


Hi Jeffrey, Put stem into "set hands" position and adjust hands to the 12:00 position. Day and date should advance at or close to that time. If you pass 12:00 and there's no change continue rotating another 12 hours and they should advance. Once youv'e found that there's midnight so if you're setting the time at say four (4:00) in the afternoon (pm) you will neew to rotate the hands so around the dial so they pass 12:00 once more then four hours more to 4:00. Now I assume by bilingual you mean that the day ring has like Mon (monday) and Lun for Spanish or the like. In this case if it's showing the wrong languare set the crown (winder) to the first position (second posn is "set hands) and rotate winder eithr clockwise or anticlockwise. Once you discover how to advance the day ring just set it to the correct day/language you want and press the crown home. Hope this solves your problem. If the advances are changing at some obscure time like 8:40 or something it's because the hands pave been located incorrectly and would need correcting by removing movement from the case.

Jul 23, 2009 | Seiko SGG786 Watch for Men

1 Answer

How to change day and date of fossil me1045


I bought my bf this watch for christmas... i set it before i gave it to him... it is the me1045
It took me forever to figure out how to set it, and even longer to actually set it.
The instructions fossil gives are useless, and the two side buttons do absolutely nothing.

So.. to set the day of the month, you have to spin the knob clockwise for 24 hrs for each day.
So, if it says 2nd, and the date is actually the 4th in the am, you have to spin it 4 times around the face, ie 48 hrs. If you go over, you're screwed and have to go all the way around again which, trust me, takes a really, really long time. Going counter-clockwise will not change the date, only the day.

The day of the week will change with the day of the month. Don't worry; they might not match up at the end. It may be the 4th and say it's monday. That's okay, because, unlike the day of the month, the week days can be turned backwards by turning the dial counter-clockwise.
Remember to take into account whether you are in the AM or PM. PM will require an extra turn beyond when it first switched to the date.

Goodluck; hope this helps.

Jan 04, 2009 | Watches

1 Answer

I have a basic citizen watch. i just dont know how to change the date-ex: from 31 to 01. it just has one dial to change the time, which i know, but i dont know how to change the date


Often you have to pull the crown out half way to change the date and pull it all the way out to change the time. Some older models require you to go around the dial past twelve o'clock twice for each day advancement. It is a pain to go around the hours and sometimes you fingers get sore but that is the worse case scenario. I have an old watch that I recently had to do that so I took a break after 15 days or so and continured later. I developed a small blister but it is a no brainer method.

Dec 01, 2008 | Citizen Watches

1 Answer

Setting my day date on watch


mcdevito75 here, The stem has 2 positions, first, set the day to 1 day before the day you need, now, slip a finger nail just under the stem and gently, gently lift the crown to it;s first position, set the DATe to 1 date before the date you need. Push crown back in, now pull crown out to set the date and time of day. Your watch is set and should change around mid nite

May 03, 2008 | Seiko SLL003 Wrist Watch

Not finding what you are looking for?
Citizen Eco-Drive BL006056H Wrist Watch Logo

Related Topics:

630 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citizen Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

Are you a Citizen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...