Question about Marantz CD5001 CD Player

2 Answers

Cd tray won't stay open--when you press the "open" button, it opens but then closes again immediately.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

You have to dismantle the cd-tray mechanism completely. In front of the tray you will see a big black gear that works with an elevated gear underneath which changes the lazer position . You will have to re-align the gears to work correctly, when open the lazer must be down, when closed the lazer must go up. This is a delicate procedure & needs patience to do it. I have done it twice. If you need help contact me. We can work it via skype.

Posted on Sep 30, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

It has a misaligned loading mechanism. I have dealt with this kind of problem before. What is happening is that before the tray have a chance to open all the way it gets stuck and gets pulled back in.

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i open my cd drive to insert my cd?


If the button on the drive won't pop open the drive, then you need to find out what is causing it to stick closed. Most drives have a tiny hole on the door so you can push a paper clip in it to open the door.

Jun 17, 2015 | Computers & Internet

1 Answer

The tray on DVD won't open when pressing OPEN button DVD/CD is inside


Often the tray is powered by a rubber belt. If the latter breaks or slips the try will not open/close. The motor will work and tell the electronics that all is well because it has done its job but it really hasn't since the tray is inert!

Sep 10, 2017 | RCA DRC247N DVD Player

1 Answer

CD DOOR WON'T OPEN


Just below the CD/DVD tray there is a tiny hole. Insert a straighten paper clip in this hole and gently push the paper clip until the CD/DVD tray pops out. You can now pull the tray out until it is in the fully opened position to remove the disc.
Try pushing the eject button to see if the tray closes, then push the eject button to see if the tray opens.
If this foes not work then the CD/DVD drive is faulty and it needs to be replaced.

Mar 06, 2012 | Dell Computers & Internet

1 Answer

I have a JVC VCR/DVD-recorder, model DR-MV7S. It developed a problem... when you placed a DVD on the tray & pressed the "eject/open" button to take the DVD into the recorder, the tray...


This can be due to a faulty LOADING drive settings, It can be due to a misalignment of the loading section and so the load does not reset to the PARK CONDITION of the MODE.
It can be a aulty gear, belt or jamming in the drive.
You need to open the player, remove the mechanism and manually check the forward and loading motion which can confirm. If the belt or the drive is jammed this can be checked and replaced or reset.
Check the mode switch settings of the forward loading.

Sep 19, 2011 | JVC DR-MV7S DVD Recorder/VCR

1 Answer

I have a Philips CDR820 CD recorder/3 CD changer. The CD tray won't stay in. I push the load/close button, but it closes and then immediately opens again. Won't stay closed. Not sure what to...


I have done this job. taking that think apart can be a pain.

There is probably a switch, that is pressed, and senses the closing or status of the tray,
and it keeps resetting. It could be a leaf switch, that would be lucky.
It could be an encased switch. You would need an exact replacement in that case.

The leaf switch could just need to be cleaned with a folded dollar bill.
Its perfect for cleaning a couple of contacts, and its not destructive.

Its a shame to throw something like that away, for such a small problem.

Maybe you could sell it at a garage sale to some kid after you tell 'em what the problem is.

Point being, taking that kind of thing apart, and putting it back together again, might not be worth the stress that goes with it. I've done it because I am POOR, and if I had money, I wouldn't go through that aggravation.

Aug 29, 2011 | Audio Players & Recorders

1 Answer

Hi - the CD tray cannot open. It is empty - no CDs in there. I hear a buzz, but an "error" message comes on. I tried pushing on the tray while turning on; I unplgged the CD player, I put it on...


The loading tray belt has more than likely stretched or snapped.
The buzzing you hear will be the motor spinning freely.
The 'ERROR' message will show up because the tray isn't opening
and activating the 'tray open' switch, therefore the 'tray closed' switch
is permanently activated after the 'open/close button is pressed.

Aug 20, 2011 | Marantz CC-4300 5-Disc CD Changer

3 Answers

I have a Harman Kardon CDR2 and the cd drawers will not open. Do you know how to fix this?


hi jlcady
sounds like the belts need to be replaced. for that the units eject mechanic assy has to be disassembled.
feel free to text for further assistance.
regards

Feb 13, 2011 | Harman Kardon CDR2 2-Disc CD Recorder

1 Answer

I have a CDX-602 CD Player. I was on a gig the other night I placed a cd in the tray. I pressed the button to close the tray and a cord was wedged so that the tray would not close. Naturally the tray...


The gears have probably come out of sync, meaning the tray is riding on the limit switch. You need to remove the deck, dismantle and re-sync the drawer mech. Check the limit switch isnt bent, it's quite flimsy

Aug 21, 2010 | Philips Gemini CDX-602 Dual CD Player with...

2 Answers

Tray won't stay open


My unit closed immediately upon opening since like 1 day after the warranty ran out. It bothered me. I finally tore it apart and this fixed it.

Take the cover off. As you are facing the front of the player, the blue sensor switch that controls the tray will be on your left in the middle of the carousel. Push button to open tray and locate it as the tray opens. Grab the tray and also the carousel and hold them so you can see the little blue switch. Use a tiny screwdriver or toothpick or other slender device to "flick" the switch fully forward and backward several times. Let go of the tray and try the button. If it still closes immediately, repeat the flicking. Try it again.

Jul 09, 2009 | Pioneer XV-HTD520 Multi-disc DVD Player

2 Answers

CD player problem


Seems like the Timingfor the Tray Open / close has got disturebed. Could be a bad drive gear, or as simple as a loose Drive belt. Get it checked by a professional.

Sep 19, 2006 | Sony MHC-RX70 Shelf System

Not finding what you are looking for?
Marantz CD5001 CD Player Logo

Related Topics:

693 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

75571 Answers

 Grubhead
Grubhead

Level 3 Expert

5484 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...