Question about Canon PowerShot A510 Digital Camera

1 Answer

When I turn My cannon camera on it shows a black screen then says E13 and shuts off. whats wrong with my camera and how can I fix it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

Thank you for using FIXYA!!!

This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.

The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannon error code E13


On what model of Canon? The only E13 code I find is for the Canon Pixma printer.

Apr 13, 2014 | Canon Cameras

2 Answers

Backup camera does not show any display. the warning light comes on but but the screen is black.


The camera at the rear end is not feeding video back to your screen or the screen is dead.

Nov 24, 2013 | 2007 GMC Yukon XL Denali

1 Answer

My camera shows a black (blank) screen in the preview. Any ideas on what is wrong with it?


hatachi camcorder dz-gx3100e blank screen wont power up is it reapairable as i have a holiday disc unable to eject

Mar 15, 2012 | Hitachi DZ-GX3100E DVD Camcorder

1 Answer

Cannon powershot A85. I turn on the camera and the screen just shows the menu or the settings. when I snap picture, it shows nothing. i cannot replay the pictures either. what could be wrong?


Hi,
It is known problem of ccd imager chip failure in Canon A85 camera and ccd imager chip will be replaced by local camera repair shop to solve this issue.
Since camera wont show live view/ blank screen so same gets saved as picture in memory card that is why no picture/ image in playback either.
Hope these info will help you.
Thanks.

Feb 16, 2011 | Canon PowerShot A85 Digital Camera

1 Answer

My cannon power shot sd600 viewer doesnt turn on


Sounds like you accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD screen on and off to save batteries. You would then use the optical viewfinder in its place. Try pressing this button one more time to see if it turns back on.

Oct 13, 2009 | Canon PowerShot SD600 Digital Camera

1 Answer

My cannon s21s has a blank screen


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, especially when taken outdoors (for shutter stuck open).
To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture.

You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help:

http://camerarepair.blogspot.com/2009/05/simple-fix-for-stuck-shutter.html

Jul 20, 2009 | Canon Cameras

1 Answer

Black screen


screen belt is cut off. send to us

Jun 18, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

1 Answer

No picture on view screen of my ixus 400 cannon


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Jan 09, 2008 | Canon PowerShot S230 / IXUS 179 Digital...

1 Answer

Digital camera


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Dec 28, 2007 | Cameras

1 Answer

Black Screen


cannon will repair it free of charge,its a problem with ixus 400.

Sep 17, 2006 | Canon PowerShot S400 / IXUS 400 Digital...

Not finding what you are looking for?
Canon PowerShot A510 Digital Camera Logo

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

169 Answers

old marine
old marine

Level 3 Expert

1991 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...