Question about Gateway FPD1960 19" Flat Panel LCD Monitor

1 Answer

Dead or ?

My monitor started showing verticle color lines after i would turn it on. then the monitor went black out of nowhere and now the light on the power button does not come on either. is this a power problem or what? thanks, nelson

Posted by on

  • 1 more comment 
  • Anonymous Aug 27, 2008

    exctly the same symptoms as mine.. bit annoyed really bought the whole kit and kaboodle so i didnt have to mess about fixing rhings.....or spending more money..mike

  • Anonymous Oct 09, 2008

    Same problem. Turning it off and on a few times usually provides a short term solution, but this is getting very annoying. Going to break down and buy a new monitor.

  • machjohn117 Dec 16, 2008

    Same problem, and it's getting progressively worse.
    If I mess with the auto configure button on the side a few times it usually starts working, but I dread the day it dies and I have to go back to my CRT monitor.


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I need the power cord. Would you sell that to me?

Posted on Oct 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Out of nowhere my monitor is showing Check Signal Cable and the digital analog box is showing as well - why?


It is possibly a loose VGA or DVI-D connector on the monitor internally. Those are the outputs to provide you video. I would suggest replacing cables, or too buy a new monitor.

Feb 21, 2016 | Samsung 216BW Refurbished

1 Answer

Verticle lines/streaks down screen


The Display panel could be bad/damaged or the main board that controls every thing could be bad---parts for Dell equipment are known to be hard and sometimes impossible to find.

Dec 07, 2012 | Dell UltraSharp E248WFP 24" LCD Monitor

1 Answer

I have a Panasonic Multimedia Projection HDTV when tv is turned on it has red & blue color spots & red verticle lines showing on the screen what could be causing this to be happening


Tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have shadows colors pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead too.These parts on the convergence board,must be replaced to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 20, 2010 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

What does it mean by dead cells?


I assume this is related to your LCD monitor.
I think you mean dead pixels. The LCD monitor has tiny pixel elements, one for each red, blue, green color and each one of these colored pixels are turnes on by a transistor. When a transistor fails then the colored pixel it controls does not light up. This is a dead pixel and it shows up as a tiny black dot.
If the screen displays a blue screen, a dead blue pixel will appear as a tiny black dot in the blue screen.
You normally would not notice a few dead pixels unless they are grouped together.

Sep 20, 2010 | Hanns.G Corporation HW191D 19" LCD Monitor

1 Answer

My HP vs19e Monitor went black, when I turn it off...


guest, If monitor vs19e acts same when connected to different "known good" pc then try this site for info: http://www.lesliewong.us/blog/2005/05/02/hp-pavilion-f1703-flat-panel-display-blackout-solution/ How old is this model? When was last time it worked correctly? 12fixlouie

May 19, 2010 | HP Pavilion F1903 19" Flat Panel LCD...

1 Answer

LG Model# RT -42PX11,screen is not working.. shows verticle line color pattens and turns shades of black when a button is pressed


My LG RT-42PX11 after a few minutes the screen starts to flicker and colors go psychedelic and after some time no picture at all

Oct 24, 2009 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Verticle color lines on scanner bed and printout in photo mode


Hardware failure, nothing much can be done, just replace the scanner.

Aug 27, 2009 | Epson Expression 1640XL Graphic Arts...

1 Answer

Screen had multi-color vertical lines, then went black


the monitor has power board issues it is not your video card. its not dead but it will require some soldering work to repair.

May 22, 2008 | Mag Innovision LT782S 17" Flat Panel LCD...

4 Answers

Camera monitor


Can you see thru the view finder if this camera has one?
If you can't you probably have a damaged or misaligned lens in the camera.
If you can you probably have a defective CCD. The CCD is what takes the image the lens sees and turns it into a digital image.

Both need to be fixed by a trained technician.

http://www.precisioncamera.com/ is the best nationwide camera repair shop I know of, you can always check locally for a camera shop as well.

Nov 14, 2007 | Sony Cyber-shot DSC-W70 Digital Camera

Not finding what you are looking for?
Gateway FPD1960 19" Flat Panel LCD Monitor Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...