Question about Computers & Internet

Open Question

I had installed techgem 4.2 in rhinoceros 4.0. but when i am open plugin from techgem, then open a dialog box... which indicate that it could not found hasp device driver. i have download all files from internet. So please anyone tell me how to install it properly.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pseudonym
  • 15 Answers

SOURCE: cannot install the device

With regards to this issue, I would suggest you to download windows update since samsung MTP devices are generic driver loaded by microsoft. Then after you have downloaded the windows update press and hold the play button of your device while you are connecting it to your computer, if this is successful a Found new hardware message will pop up on your screen then just follow the on screen instruction on how to install your device. Hope this helps. PEACE!

Posted on Sep 02, 2007

bamma_boy
  • 146 Answers

SOURCE: HTC PPC-6800 Vista driver and/or WMDC install problem

hey u need to install windows mobile device center first, not its update, on ur vista, as activesync cannot be installed on vista...
download it from
http://www.microsoft.com/windowsmobile/devicecenter.mspx after a validation check..

Posted on Jan 26, 2008

  • 1894 Answers

SOURCE: need to download hasp driver device

please explain the problem in detail.

Posted on Jul 15, 2008

Scott Ellin
  • 558 Answers

SOURCE: Impossible to install driver for Realtek High Definition 1.81

Hi there,
Since after installing the Service Pack your drivers are update. Now you can not use the previous one.

Since after many trial, your driver is now got corrupt. I will suggest you to Roll Back the System from the Service pack 3 to Service Pack 2. And then go for it.

Otherwise use the Repair window method and then reinstall the original drivers.

Let me know the issue after this.

Regards
Ellin

Posted on Sep 28, 2008

frcs68
  • 1605 Answers

SOURCE: Problem wirh Microsoft 6T04 Network Adapter

check out the following link
http://www.errornerd.com/error.php?seed=Tunnel.sys&gclid=CKTH6oL245kCFQKaFQodonn0QQ
there are few steps need to perform to fix the problem.

Posted on Apr 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i do a print aligennment on a hp deskjet 6540


The printer automatically aligns the print cartridges after a new print cartridge is installed. You can also align the print cartridges at other times to ensure optimal print quality.
To align print cartridges:
1. Load letter-size or A4-size plain white paper in the In tray.
2. Open the printer Toolbox.
3. Click Align the Device.
4. Click Align , and then follow the onscreen instructions

Here are directions for how to open the printer Toolbox, in case you don't know:
The printer Toolbox contains a number of useful tools to enhance the printer performance.
Use the printer tools to perform the following tasks:
• Set the Auto-off function
• Clean the print cartridges
• Align the print cartridges
• Calibrate color
• Print a test page
• View estimated ink levels
To use the tools, open the Printer Properties dialog box, click the Services tab, and
then click the Service this device button.

AND, in case you don't know how to open the Printer Properties dialog box, here you go! :
The Printer Properties dialog box is also referred to as the Printer Preferences dialog box.
Opening the Printer Properties dialog box
Follow these steps to open the Printer Properties dialog box:
1. Open the file that you want to print.
2. Click File , click Print , and then click Properties or Preferences.

Good luck to you! I hope this helps.

Aug 07, 2014 | HP DeskJet 6540 InkJet Printer

1 Answer

Hello, please help me that i can recovery my note book. (acer aspire one d255e). the error is BOOTMGR is missing press ctrl+alt+del to restart. i can't recovery. thank you.


1. Insert the Windows 7 installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.

Jul 25, 2011 | Computers & Internet

1 Answer

Solutions for "HP Pavilion dv5


File: \BOOT\BCD Status: 0xc000000F Info: An error occurred while attempting to read the boot configuration data. First try going into Windows safe mode with command line utility enabled. (F8 on bootup). In command console typechkdsk /f /r and enter Y for yes at the prompt. Wait for it to finish, it may take a while and then test the issue. If the problem persists, please continue with the following instructions. Rebuild BCD 1. Put the Windows Vista installation disc in the disc drive, and then start the computer. 2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears. 3. Select a language, a time, a currency, and a keyboard or another input method, and then click Next. 4. Click Repair your computer. 5. (Click the operating system that you want to repair), and then click Next. 6. In the System Recovery Options dialog box, click Command Prompt. 7. Type BOOTREC /FIXMBR, and then press ENTER. 8. Type BOOTREC /FIXBOOT, and then press ENTER. 9. Type BOOTREC /REBUILDBCD, and then press ENTER. Use the Windows Recovery Environment (WinRE) to run System Restore 1. Insert the Windows Vista installation disc into the disc drive, and then start the computer. 2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears. 3. Select a language, a time and currency, and a keyboard or input method, and then click Next. 4. Click Repair your computer. 5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next 6. At the System Recovery Options Dialog Box, click on System Restore. 7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point. 8. Click Finish to restore the system. Startup Repair from the Windows Recovery Environment (WinRE) 1. Insert the Windows Vista installation disc into the disc drive, and then start the computer. 2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears. 3. Select a language, a time and currency, and a keyboard or input method, and then click Next. 4. Click Repair your computer. 5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next. 6. At the System Recovery Options Dialog Box, click on Repair your computer. 7. (Click the operating system that you want to repair), and then click Next. 8. In the System Recovery Options dialog box, click Startup Repair
finaly if you do not have the cd you can use a copy too.
Kronoguy

Jul 04, 2011 | Computers & Internet

1 Answer

Toshiba satellite L300 will not boot up. error code 0xc00000e9


What you can do is attempt to repair the system using System Restore or startup repair. I would suggest trying startup repair first.



Method 1: Use the Windows Recovery Environment (WinRE) to run System Restore

======================================================

1. Insert the Windows Vista or Windows 7 installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next

6. At the System Recovery Options Dialog Box, click on System Restore.

7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point.

8. Click Finish to restore the system.


Method 2: Startup Repair from the Windows Recovery Environment (WinRE)

======================================================

1. Insert the Windows Vista or Windows 7 installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

6. At the System Recovery Options Dialog Box, click on Repair your computer.

7. (Click the operating system that you want to repair), and then click Next.

8. In the System Recovery Options dialog box, click Startup Repair.


Hope this helps


Ray

Mar 07, 2011 | Computers & Internet

1 Answer

Error Oxc00000e9 when i turn on aspire 5741, no external devices plugged in.


try this below


First please refer to the following thread to see whether it helps.

http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=796452&SiteID=17


I know that you are unable to start the current vista operation system and getting the error 0xc00000e9; the issue can be caused by the damaged system files or hardware device. You might first follow the steps below to exclude the possibility of system corruption.


Method 1: Use the Windows Recovery Environment (WinRE) to run System Restore

======================================================

1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next

6. At the System Recovery Options Dialog Box, click on System Restore.

7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point.

8. Click Finish to restore the system.


Method 2: Startup Repair from the Windows Recovery Environment (WinRE)

======================================================

1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

6. At the System Recovery Options Dialog Box, click on Repair your computer.

7. (Click the operating system that you want to repair), and then click Next.

8. In the System Recovery Options dialog box, click Startup Repair.


Good luck!

Feb 14, 2011 | Acer Aspire 5050-3371 Notebook

1 Answer

What to do if bootmanager fails?


hi frenofurs05,

Thank you for the post.


I suggest trying the following methods to troubleshoot the issue:


Method 1: Startup Repair from the Windows Recovery Environment (WinRE)

============================================

1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

6. At the System Recovery Options Dialog Box, click on Repair your computer.

7. Click the operating system that you want to repair, and then click Next.

8. In the System Recovery Options dialog box, click Startup Repair.


Method 2: Rebuild BCD

============================================

1. Put the Windows Vista installation disc in the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time, a currency, and a keyboard or another input method, and then click Next.

4. Click Repair your computer.

5. Click the operating system that you want to repair, and then click Next.

6. In the System Recovery Options dialog box, click Command Prompt.

7. Type Bootrec /RebuildBcd , and then press ENTER.


Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================

1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next

6. At the System Recovery Options Dialog Box, click on System Restore.

7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point.

8. Click Finish to restore the system.


Note:I just pasted this answer from other person cause its very long when i will wrote it and i think the better one than my explanation.


regards,
mastergani

Jan 03, 2011 | Toshiba Satellite L500 Series Notebook

1 Answer

Flash player plugin not recognized under Mandriva


1. Download the plugin to begin installation. A dialog box will appear asking you where to save the file. Download link >

http://linux.softpedia.com/get/Utilities/Adobe-Flash-Player-for-Linux-18853.shtml

2. Save the .tar.gz file to your desktop and wait for the file to download completely.
3. Quit your browser.
4. Remove all existing Adobe Flash Player installations from the system.
5. Unpackage the file. A directory with contains libflashplayer.so will be created.
6. Copy libflashplayer.so to ~/.mozilla/plugins. Create the 'plugins' folder if it does not exist yet.
7. Launch your brower. To verify installation in Firefox choose Help > About Plug-ins from the browser menu.

Hope this solves your problem, please let me know as I was also an ex-windows user and the switch over requires allot of new learning for the linux environment.

Aug 14, 2009 | Computers & Internet

1 Answer

Black screen on laptop, will not boot in safe or normal. no back up disk, tried f11 sys recov did not work


Method 1: Use the Windows Recovery Environment (WinRE) to run System Restore
======================================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
6. At the System Recovery Options Dialog Box, click on System Restore.
7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point.
8. Click Finish to restore the system.

Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
======================================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. (Click the operating system that you want to repair), and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.

May 15, 2009 | Compaq Armada E500 Notebook

1 Answer

OPERATING SYSTEM BOOT MANAGER IS DELETED BY ACCIDENT


Try This:

1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.

Feb 20, 2009 | Computers & Internet

1 Answer

I put the computer on and it says tht an error occured while attempting to read boot it and the error code is 0x000000f and it was my daughters christmas box please can u help.


I'm assuming you have vista installed.If not,please reply and I will update this info.

Method 1: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.

Method 2: Rebuild BCD
============================================
1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time, a currency, and a keyboard or another input method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type BOOTREC /FIXMBR, and then press ENTER.
8. Type BOOTREC /FIXBOOT, and then press ENTER.
9. Type BOOTREC /REBUILDBCD, and then press ENTER.

Please rate this solution.

Jan 17, 2009 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...