Question about Casio G''zOne Type S Cellular Phone

1 Answer

Gzone Black/Silver phone freezes during startup at second verizon wireless logo screen...waits 5 seconds and tries to re-boot again, repeating same over and over til you pull the battery. Will not boot up. Have tried charging batttery, using a different battery and pulling battery in/out, holding start key down etc...

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 139 Answers

Hi, when a phone it is continuously rebooting, it means that memory has been affected by VIRUS.

VIRUS can damage a phone in no time. VIRUS can be caused by downloading applications on your phone through the internet, or might be from data transfer from a phone to another phone.

To remove the VIRUS, you will need to flash the phone memory. Flashing the phone will restore back the phone to it normal state.

You can use this link to see how to flash your phone

Flashing a cell phone will erase carrier data from the memory. Cellular companies can usually do this for a fee. Online buyer sites sell the software kit that will flash a cell phone from home computers.

To flash a phone you will need to rewrite the PRL file by connecting your phone to a computer with the needed equipment. Your best bet is to take your phone to a dealer that flashes phones on a regular basis. For more information

hubpages.com/hub/How-to-Flash-your-cell-phone


and

unlocktotalk.com/UnlockCodeInstructions.htm.

Take care.

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Get in to bios acer aspire AST180-ED400A


First shut your computer off. Wait a few seconds (to allow the hard drive to stop spinning) and start the computer again.
Start repeatedly pressing F2 while the Acer logo is displaying. Press it once, wait a second, press, it again, wait another second, and repeat this while the Acer logo is displaying until you see the bios setup screen.

Feb 19, 2015 | Acer Computers & Internet

1 Answer

ASUS T100 stuck at preparing automatic repair message will.not reboot


Hello there, i just owned a brand new Asus T100 for 2 days and today on the 3rd day after purchasing, i faced problems during boot/start up where the laptop gets frozen on the Asus logo screen.
I tried holding down the power button for 10 seconds and turned it on again. It ran a series of windows software updates before the start up, then after all software updates have been completed, the laptop resumed to freeze at the Asus logo screen again. I tried holding the power button for 10 secs followed by holding the power button and volume up button at the same time, to get into automatic repair/repair mode. THIS HELPS, get into the repair mode!

To cut it short, i tried the other advanced options as well as the restart button in the repair mode but to no avail. After carefully reading the different options in the 'advanced options' in repair mode...
Here's what worked for me:
1) If you're stuck at the Asus logo screen which doesn't seem to boot for ages or at least 10 minutes, hold down the power button for 10 seconds and let the screen turn black. (I did this with my charger plugged in, not too sure if it matters)
2) Count to 10 seconds. Switch the laptop on by HOLDING THE POWER BUTTON + VOLUME UP BUTTON at the same time. This will send the laptop into an 'automatic repair', followed by a 'diagnosing this PC' and after which you will see a blue screen which is the repair mode.
3) On the blue screen you will see 2 buttons, 'Restart' and 'Advanced Options'. Click on 'Advanced Options'. (DO NOT CLICK RESTART, it does nothing as you will get stuck again at the logo screen)
4) After clicking 'Advanced Options', click 'Advanced ....' (i forgot what exactly) and click 'STARTUP REPAIR'. This is the crucial part.Then follow whatever the system promts you.
5) Afterwards, it will attempt to repair your system then lead you back to the logo screen for startup.
6) Wait a few minutes and you should be able to get to your login screen as usual.

Hope this helps. I chanced upon it by guessing which would actually help me.

Nov 19, 2013 | ASUS Tablets & eReaders

1 Answer

Apple macbook air won't turn on


Does the Apple logo or the Pinwheel show on the screen?

There is a problem with you OSX installation. Please boot from the Recovery partition (hold Cmd+R during the startup chime), and use Startup Disk to choose the correct hard drive to boot from.
You can also restore from a backup, and not lose your data here as well.

Oct 28, 2012 | Apple MacBook Air

2 Answers

Phone powers on to the verizon wireless screen and then the screen goes black for a second and then back to the verizon wireless screen. this continues without fail. did hard reset already.


try hooking into the PC and master reset, see link -->
www.verizon-phones.us/how-to-reset-verizon-samsung-reality-factory-default-settings

May 03, 2011 | Samsung Reality U820

1 Answer

It won't start it just has apple on screen


hi


try to reset your phone



To reset i Phone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.

If i Phone won't turn on, or the display freezes or doesn't respond

  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn i Phone off and turn it on again. Press and hold the Sleep/Wake button on top of i Phone for a 10 seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset i Phone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears


More resets:

Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the i Phone 3G.
2.) Start up i Tunes
3.) Hold down HOME button on the i Phone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

if this was helpful kindly vote for this answer..


thank you

Dec 22, 2010 | Apple iPhone 3GS Black (16 GB)

1 Answer

I cant get my phone to turn on everytime I hold the reset button the apple logo appears for 5 secs then the screen turns black.


Download the latest iTunes to your computer and reset the iPhone. Then re-sync it.
Reset

To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds. During this time, a red "power off" slider may appear and the screen may go black, but do not release Sleep/Wake and Home buttons until the Apple logo appears.
If iPhone won't turn on, or the display freezes or doesn't respond
  1. Press and hold the Home button for at least six seconds, until the application you were using quits.
  2. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
  3. If that doesn't work, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears

More resets:
Try This:
1. Remove Sim Card
2. Hold in 'Home' button and 'On/Off' button together until Apple logo appears
3. Replace Sim Card
4. Hold in 'Home' button and 'On/Off' button together until normal phone screen appears.


Also, Try this:
1.) Shut down the iPhone 3G.
2.) Start up iTunes
3.) Hold down HOME button on the iPhone 3G
4.) While keeping the HOME button depressed, plug in the Sync cable
5.) A message will pop up to ask if you want to reset.
6.) Just click YES and the reset process should start.

Nov 30, 2010 | Apple iPhone 3G

1 Answer

Does not get past the Verizon screen when turning the phone on.


I hate to be the bearer of bad news but the only thing i would say try is taking the battery out for about 30 seconds. putting it back in and trying again. if it does not turn on then i'm afraid the phone will not come back. It's a somewhat rare problem but does happen.

Unfortunately all information is gone unless you had downloaded backup assistant.

Apr 13, 2009 | Samsung SCH-a870 Cellular Phone

1 Answer

Wont turn on - goes to black screen w/ "Verizon Wireless" Logo


its the short circuit in main board chip ic number IC431 OR IC436 check out .that faulty ic needs replacement.

Mar 05, 2009 | LG enV VX9900 Cellular Phone

14 Answers

It cant turn on


Just some suggestions. I have had my Q9m since September 07. If you reboot the phone nightly (take battery out put back) and allow to boot up again it help by resetting the RAM. Also under System Tools>Task Manager>Menu>Kill All - it seems that every program you use on the Q it keeps running which causes the Q to slow down and freeze. I know doing these things can be a pain however my Q has been running with zero issues since September. I also have the origional Q in black for over 16 months and I wouldnt trade either phone for anything on the market currently. As far as the screen sticking on the Verizon Logo...try taking battery out, power on and as soon as logo appears pull battery out quick and replace...you may need to do this a few times but it will bypass what ever is causing this boot up error. Windows Mobile 6 certainly isnt perfect. Hope these suggestions help.

Dec 11, 2007 | Motorola Mobility Q9m Smartphone

1 Answer

Packard Bell error signals


here is a list of packard bell beep codes with meanings
http://www.uktsupport.co.uk/pb/mb/phnxcode.htm
Hope it helps you

Nov 13, 2007 | Packard Bell Easy One Silver 2101 Notebook

Not finding what you are looking for?
Casio G''zOne Type S Cellular Phone Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Casio Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...