Question about Televison & Video

1 Answer

Magnavox TV model 51MP392H/17 convergence problem

Posted by on

  • charliegraha May 24, 2011

    convergence problem color is out of line

  • charliegraha May 24, 2011

    what part number do i need

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,468 Answers

Hello
What is the real problem to your Philips Magnavox. Get me some more details by FixYa please.

Posted on May 24, 2011

  • The Knight
    The Knight May 24, 2011

    Hello
    It is best to replace the digital convergence board as a card, rather than making surgery to it. Components in that bard is veru difficult ot get from open market. Moreove, the digital convergence has a 35 point alingment, and you must have its service manual to do it properly. If you are well aware in digital electronics you can do it by yoursef. Not a mere knoledge is not enough for this work. It is a very skilled wor. If you have confidence and have enough knoledge in folloing the schematic diagram of the set, inform me, and send your email address to me by FixYa. I'll send the service manual by return mail. It is a very very large file; comes up to 35MB capacity. you must have Adobe Reader-9 or above installed in your system to download and read it properly. OK.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magnavox tv model 51mp392h/17 words on the bottom are double one set is red other set is green


Thats caused by failed convergence ICs and the 6.8 ohm resistors. You can get the repair kit called the DPTV305 -DPTV345 & MAG01 chassis convergence repair kit which fits your model. The kit has the components and the CD with repair instructions and its available at the following link top of the page. http://tvrepairworld.com/phillips__magnavox_repair_kits

Apr 09, 2013 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

My 48 inch Magnavox HD is showing double Model #: 51mp392h/17


2_27_2012_4_36_52_pm.jpg

If it looks anything like the picture (3D etc) it will need the "Convergence circuit" repaired.

Let me know if you have questions.

Feb 26, 2012 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a Magnavox 51mp392h/17,that now has double vision (text is double,all images) there is also green, off red colors on the picture. Please help me the tv is 6 years old. should i throw it away or get...


No.Should cost u like $300-350 for parts and labors.Get it fixed any local tv shops can fixed this problems,very common problems for DLP CRTS tubs design projection tvs Tv have a problems known as a convergence problems,it is dead.The tv convergence board it is dead,that why ur tv picture colors lines R,G,B mis alignments,have pictures colors shadow or 3D pictures look alike.The tv convergence board must have it parts replace like 2 STK convergence ICS and some or all of it resistors to fixed the convergence board to solved convergence pictures problems.

Jul 22, 2011 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Convergence wont align on Magnavox 51MP392H/17


You will need the original remote to perform a convergence touch up on Magnavox TV sets. If you are using the original remote - but still can't get it working - go back to the site where you purchased the tv repair kit and ask for their help

Feb 06, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a Magnovox HD TV Progressive Scan (Floor Model) TV


You can find a replacement Philips/Magnavox fresnel screen, in stock, for this model (51MP392H/17) at this following link from a major parts distributor:

Philips / Magnavox 51MP392H Replacement Part Fresnel Screen

And here's a link for the Lenticular (middle) Screen, if needed:

Philips / Magnavox 51MP392H Replacement Part Lenticular Screen

Jan 16, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Phillips projection tv will not converge


Replace Both convergence ICs STK392-120s use 180s better ICs they are big black ICs will have STK on them Mat Electronics for parts 1-800-628-1118.Also CK 6.8 ohm resistors around STKs.

Dec 30, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

No Picture No Sound Magnavox Rear Projection Television


51MP392H/17

Actually I have this TV and you need 2 Convergence IC's STK392-120's (120's and 150's will work) of course order 2 of the same type I'm using replacement 150's they allow for a little higher heat and were cheaper ALSO you need to replace the 12 resistors with 6.8 ohm metal film resistors, make sure they are metal film! don’t skimp out here I did and then they blew and fried my IC's and I had to replace everything again!

Great reference link that I posted pictures on, check out page 3
http://www.techlore.com/forum/thread/16736/Magnavox-51MP392H-17-51-quot--TV-has-double-vision/

Where I got all my parts that worked:
Suburban Electronics http://www.suburban-elect.com/

Manual Library you should find all you need here:
http://www.techlore.com/group/2/list_downloads



What you need:
(2) STK392-120 OR STK392-150 IC chips
(12) 6.8 Ohm Metal Film resistors
set of star screw drivers
15 watt pencil solder pencil, DO NOT use a high watt iron you will fry the surface mounted item.
good leaded solder, and flux


BTW if you don’t plan on trying this and are going to throw out the TV, I still need a IC convergence board for a 51MP392H/17 TV I'm fixing, I'm willing to pay S/H and buy your IC board that’s not been tampered with. Edwinkraus@hotmail.com

Nov 11, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a magnavox 51mp392h rear projection tv and im having problems with the convergance


51MP392H/17

Actually I have this TV and you need 2 Convergence IC's STK392-120's (120's and 150's will work) of course order 2 of the same type I'm using replacement 150's they allow for a little higher heat and were cheaper ALSO you need to replace the 12 resistors with 6.8 ohm metal film resistors, make sure they are metal film! don’t skimp out here I did and then they blew and fried my IC's and I had to replace everything again!

Great reference link that I posted
pictures on, check out page 3
http://www.techlore.com/forum/thread/16736/Magnavox-51MP392H-17-51-quot--TV-has-double-vision/

Where I got my parts that worked:
Suburban Electronics
http://www.suburban-elect.com/
Manual Library you should find all you need here:
http://www.techlore.com/group/2/list_downloads



What you need:
(2) STK392-120 OR STK392-150 IC
chips
(12) 6.8 Ohm Metal Film resistors
set of star screw drivers
15 watt pencil solder pencil, DO NOT use a high watt iron you will fry the surface mounted item.
good leaded solder, and flux


BTW if you don’t plan on trying this and are going to throw out the TV, I still need a IC convergence board for a 51MP392H/17 TV I'm fixing, I'm willing to pay S/H and buy your IC board that’s not been tampered with.
Edwinkraus@hotmail.com

Oct 05, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Magnavox 51MP392H/17


yes youre model will need two convergence ICs they are both STK392-120 and you will also need some 6.8 ohm resistors usually two or four resistors will need replacing as well. The site servicemanuals do have all the parts and they do provide free installation instructions with the ICs.

Sep 03, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Magnavox 51mp392H/17 convergetnt problems


When I turn on my magnavox 51mp392h/17 the sound and picture works but there is a sizzling sound coming from inside of the tv I looked and the sound is coming from what looks like a coil it has 4 lines coming from it 3 of which go to the color projectors and one to what looks like a transformer. Can you help me out?

Jun 06, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...