Question about Jandy Lite 2 Natural Gas Pilot Light Heater

1 Answer

GOT THE HEATER RUNNING FOR 5 HOURS YESTERDAY BUT WHEN I SHUT IT OFF AND THEN TRIED TO TURN IT BACK ON IT WOULD NOT START. THE RED LIGHT IS BLINKING SLOWLY, IT USUALLY IS ALWAYS ON! BARRY

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

Hi Barry,

Turn off al power... drain the header manifold. Remove the top cover and remove the pressure sensing line from the pressure switch. Clean out the line and the manifold fitting with a piece of wire. Reinstall manifold drain plug. Reconnect rigid pressure sense line to manifold and pressure switch. Make sure the sense line does not leak or it can cause the unit not to heat at all. Leave the power for the heater off and circulate water for a few minues to flush header manifold then Test the unit. If this does not correct the problem... respond with the complete model number and we can continue troubleshooting.

Thanks for choosing FixYa,
Kelly

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There are only 5 wires from truck. Red, black,


aaaa more info your new plug should be marked as to what to connect to , DONT drive your self insane do one wire at a time and with a test light im guessing this is a rv flat spaded plug as i said start with one thing at a time turn on just running lights not headlights running lights that will put power in on wire only and that you want to connect to your plug running lites next shut off lights ,turn on a signal light signals will be a blinking light only on one wire.

Oct 08, 2014 | Cars & Trucks

1 Answer

System shut off while playing then have a blinking red light. Tried to turn back on - back to a blinking red light. Can not eject game either.


sighh dude thats it its over!! unless you bought it from a store and still have your warranty than send it to repair or send it by mail.. that blinking red light A.K.A ring of dead is horrible thats why you should get another system

Apr 10, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Game stuck/blinking red light


i was playing mw2 yesterday and bam (red light of death) ill prob have to send it to sony but i got the game out follow these steps. 1. turn off at the back. 2. hold your finger on the eject button. 3. turn on again at the back while holding the eject button for a few seconds 4.your playstation should start up and your game should be ejected

Oct 08, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Blinking red light, no picture or sound


You goingto need to replce the powersupply inside www.partstore.com should have it or preorder it for you from the manufacture i think there around $150 they could be cheaper. Another option is Ebay. thanks for using fixa.com please rate.


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Aug 21, 2009 | Panasonic TH-50PX75U Plasma HDTV

2 Answers

Red light green light yellowlight red blinking light


From what I understand its a problem with the backwards compatibililty(the engine/drive that lets you play ps1/ps2 games)on the 60g.Sony says they have never heard of this problem yet these models are no longer in production.I have had mine for 2 years and it died today,same problem.

Jun 02, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Marantz SR6001 AV Surround Receiver - Blinking Standy Light


I have exactly the same problem! Sometimes when I turn the input dial it comes back on but this time it is out for good. I have tried re-wiring and unplugging etc. nothing seems to work.

Jan 21, 2009 | Marantz SR6001

1 Answer

Blinking green light on the back of hp pavilion


1. Your smps is OK for power supply
2. check the beep sound for RAM and Video card (If it is long beep the RAM is having and short and frequent the Video card) o

3. Remove RAM then start ssytem see the response shoutdown, clean the RAM place it back start the ssytem
4. Remove the CMOS battery or short the jumber for any setting in BIOS start the ssytem
5. Disconnect all the cables connecting motherboard including Hard disk except SMPS power supply to Mother board

Jun 22, 2008 | Computers & Internet

1 Answer

XG-C50 Problem


Hello

Replace the fly-eye lens of projector.

Viren

Nov 09, 2006 | Sharp (BQCXGC50X1) Projector Lamp for...

Not finding what you are looking for?
Jandy Lite 2 Natural Gas Pilot Light Heater Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jandy Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

8694 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Jay Finke
Jay Finke

Level 3 Expert

1384 Answers

Are you a Jandy Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...