Question about Samsung Televison & Video

1 Answer

When I turn my tv on it just hums and it sounds like it wants to cut on only the lamp and the standby temp lights come on can anyone help me out here? I also just installed a new lamp and it's doing the same thing It's a samsung 61 inch model # hl-r6167w

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

You have a bad color wheel that is broken. To get the right one you must have the model number and the version code. The version code is on one side of the TV at the back. Will be two letters and two numbers. Installing one can be a bit of a pain if you have never taken one out and replaced. You have to pull back the light engine to see the color wheel. The light engine is the main box like module that has the projector lense. A screw(s) holds in the color wheel and has a wire plug to it as well. Do a search on Google or Ebay etc. to find the part to purchase. Again the version code is very important! Before buying I advise that you take the color wheel out to inspect it for damage. When installing the new color wheel DO NOT touch the wheel itself.

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung tv lights flashing standby/timer lamp


Possible lamp or color wheel---remove the lamp and look to see it is not shattered inside.

May 30, 2012 | Televison & Video

1 Answer

Sansung model 56 Inch hpl5663w first had a buzzing sound the tv repair man said it might be a color wheel but the tv played well except for the low buzzing sound . then one night the picture went black and...


Hi Charles,

Sorry for the late reply, I'm offline upon purchasing my service.
You have said that you can hear a low buzzing sound before the unit gone to subsequent shutdown and the lamp blinks green(meaning that the unit try to turn on the lamp for consecutive attempts but not generally mean that the lamp itself is faulty.) and the temp led light come on.

As a matter of fact all the information you have mentioned linked to the symptoms you've encountered right now. A low buzzing sound might be caused by faulty FAN inside the unit that trigger the error code (blinking of the standby/temp led light) and turns off the unit automatically due to thermal protection circuit.
However, the technician might be true also that the buzzing sound came from the faulty color wheel. To confirm it, you have to verify where the buzzing sound came from. Color wheel is in front of the lamp assembly. Faulty color wheel can produce the same symptoms you've encountered right now but most of the time, it shows 3 blinking led light at the front panel (Timer, Lamp, standby/Temp).

I would advice you to open the back cover of your unit, fixed the lamp door safety switch with the tape to make it in closed position( if it is on open position the unit will not power up), and then turn on the unit and observe the fans if will spin or not, and check also where the buzzing sound came from before the unit gone to shutdown.
I've suspected that the fault came from the fan based on the led light flashes. Please let me know what you will discover after following the steps above to verify where the exact fault came from. Also, let me know the exact status of the led light at the front panel, (Timer, Lamp, standby/Temp ), which of them lit solid/blinking, it will help us to narrow the caused of the symptoms.

Jdvillanueva

Oct 14, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

Have a 50 inch hlp506w model samsung projector tv. it had wavy lines through it, and then turned off. it is continuing to try and turn on with the standby/temp and lamp lights flashing. replaced lamp...


Change the tv Ballast board too.This board only job are to help it to ignite the tv projection lamp. This tv also have a colors wheel design into it too.If tv have colors pictures flashes or Black& White flashes within it pictures or tv have grinding noises or humming sounds,than the tv colors wheel it is warp and dead.This tv colors wheel must be replaced,because the colors dis wheel is warn out.

Jul 05, 2011 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

Hello.... Samsung HL-P5063W Lamp LED blinks approximately 35 times followed by 1 long standby/temp light blink After this all 3 lights remain lit and flash....lamp/standby and timer makes a loud humming...


Sound like ur tv have two problems.The "lamp"LED light flashes,mean ur tv need a new projection bulb.The loud refrigerator sound,mean the tv colors wheel is dead,it spinning off of it axes motor.Hire a tv repairman to do this the colors wheel is hard change,because require take out many machanicals parts even to get to the colors wheel to change.The bulb is easy replaced,but he there pay him to put new one in.

May 26, 2010 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

Samsung 56in big screen lights flashing-cuts off


theres defective caps in the power supply

Apr 25, 2010 | Samsung Televison & Video

1 Answer

Standby/temp light and Lamp light are flashing


Sounds like a samsung but I will need the model number to assist you more accurately. Please respond to this same post.

Dec 04, 2009 | Televison & Video

1 Answer

Sound but no picture - won't stay on


you may check your lamp first. other than that i would say a faulty mains board.

Apr 16, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

No picture or sound


Hi, your color wheel needs to be replaced, the bearings fail causing the grinding noise, the new ones use "air bearings" so they are supposed to last much longer, video-tek

Mar 26, 2009 | Samsung HLR5067WX 50" Rear Projection HDTV

2 Answers

TV and Vedio-Projection televisions


what i would do is crack into the tv and watch the individual parts being careful not to unplug anything while you take the back panel off.....turn it on and see what happens. let me know what happens

Sep 30, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...