Question about Sony XVM-H65 6.5 in. Car Monitor

2 Answers

Monitor showing no signal and button not working

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

The monitor needs a signal ( source), i.e., DVD, TV, to show a picture. If your monitor shows no signal then either the source is not connected or not functioning. Check the connections from the monitor to the source. Also, check that the source is functioning properly and is receiving power.

Posted on May 24, 2011

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 54 Answers

All right. I have an issue... my Car LCD Monitors will boot and show the windows loading screen. however right after that, my monitor says no signal... and i can get windows running in safe mode, and my monitor will still work. but monitor will recive no signal after windows boots normally. Please help.

Posted on Oct 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg w2343t monitor


try monitor on a different working desktop to see if it works, both on the external and internal video card ports. If screen menu buttons fails to respond, fault is either on menu buttons or you may have a burned out lcd screen, try a different monitor on your desktop pc to check its functionality. Monitor probably needs replacement.( It might not be burned out for you mentioned "no signal" error message appeared on screen, have the screen menu buttons checked)

Dec 28, 2013 | Computers & Internet

1 Answer

Acer d241H display plus mode shows no signal. I want to use the monitor stand alone. When i press the source key to change to display plus mode. the screen shows no signal. (the first time I powered on the...


I had the same issue as yours. After contacting the Acer support team, I got the response as follows. I tired and it worked.

"In order to resolve this issue, you may please perform a power reset. This will remove any static electricity stored in the hardware components that may cause the issue.

- Turn the monitor off and unplug the power cord and VGA cable from the monitor.

- Hold the power button on the unit down for 30 seconds.

- Release the power button and plug only the power cord back into the unit. "


Hope it helped.

Oct 30, 2011 | Acer D241H LCD Monitor

1 Answer

Plugged in monitor all it shows is check signal cable


Does the monitor have both analog and digital signal sockets? If so, perhaps all you need to do is choose the other input using the buttons on the monitor?

Aug 08, 2010 | Samsung SyncMaster 216BW Monitor

1 Answer

Screen monitor self diagnostics show


that means no incoming signal, but some problem i encountered related in vga cable and lost connection on ckt board. as long that the cpu is working and the monitor show (no signal) focus trouble shooting on that parts. replace cable if possible( same port configuration)

Apr 20, 2010 | Princeton Digital VL2018W Monitor

1 Answer

It is plugged into the computer, and it is powered on, but the monitor screen says that there is no signal. I am certain that the monitor is plugged into the computer. I checked it via control panel and it...


have you checked if its on the correct source,, analog or digital press the source button it will cycle to both and if its receiving a signal from the computer it should show a picture.
Good luck

Aug 27, 2009 | Acer AL1916W 19" LCD Monitor

1 Answer

My computer is not working shows keyboard erro and stop


Hi...

When you monitor saying which is no signal this is a monitor port problem. Check your monitor connector if it is properly connceted to the motherboard. That is the only way of monitor saying no signal.

Regards
PCmania

Aug 22, 2009 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

2 Answers

NO SIGNAL PROBLEM


Please check whether the monitor is set to the correct settings. If you feel its incorrect, most LCD/TFT monitors come with an auto set up button which will restore the display to one that usually works. In case it still doesnt work, you might need to connect your pc to a different monitor and check the display settings. You could also try to download the drivers for this monitor and then re-connect the monitor and see if it works.

Jun 02, 2009 | ASUS VW192S Monitor

1 Answer

Kds model 780 monitor no signal, power button does not work


My monitor does the same thing at times and sometimes shows "No Signal" and at other times the screen will maintain the images but the backgound color switches to mustard yellow. In each of these cases I have been able to solve the problem by unplugging the power cord from the electical outlet for about three seconds and plugging it back in. I have a KDS model 780 LCD.
GOOD LUCK

Dec 15, 2008 | KDS Radius RAD-5 15 in. Flat Panel LCD...

1 Answer

BLANK MONITOR


the signal stage of your monitor is likely to have a problem, if the cpu is working fine then troubleshoot the signal stage of your monitor or visit a local technician

Dec 06, 2007 | Star Logic 17" LCD Monitor

5 Answers

19" starlogic monitor


If you are getting a "No Signal" message, someone may have inadvertantly pressed the wrong button on the monitor. Use up arrow of button #5 below to cycle through RGB (normal VGA connection) and DVI sources. Down arrow will result in "No Signal" message.

There are five buttons at the bottom of the screen on this monitor. From the left:
1 - sound volume
2 - degausser
3 - power on/off
4 - monitor set-up
5 - RGB/DVI source

Nov 20, 2007 | Star Logic 17" LCD Monitor

Not finding what you are looking for?
Sony XVM-H65 6.5 in. Car Monitor Logo

Related Topics:

673 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4848 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Philip Rowney
Philip Rowney

Level 2 Expert

94 Answers

Are you a Sony Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...