Question about Graco Ultra Deluxe 5-in-1 4605 Crib

1 Answer

Drastic Need for 2 Upper Tracks...

I desperately need the 2 upper tracks for a Graco (Simplicity, Inc.) 4 in 1 Ultra Sleep System, Model# 4600CL. This is the white metal crib. I have already talked to Graco (Didn't make the crib so they have no parts), Simplicity,Inc. (They weren't concerned at all with my problem and said I would have to buy a new crib) They were completely out of parts. I also checked at Products America and they don't have anything to fit either. HELP please. Thanks

Posted by on

  • Lynn526 Sep 03, 2008

    I got tired of calling Simplicity, Inc. trying to resolve this problem. They were absolutely no help and were concerned even less. I received no apologies or regrets at their lack of help. So, I reported them to the PA. Better Business Bureau. Within a week, they called me and said they would be happy to send me the parts that I needed. What I would like to know is, where did these non-existant parts come from? Every time I called them, they told me that that they had absolutely no parts available. Someone was fibbing. Anyway, thanks to the BBB, I have our crib together and ready to go. Thanks Again BBB!

  • clabber Jan 12, 2009

    I have the same problem but I haven't been able to get ahold of Simplicity their number rings a real fast busy signal, likes its no longer in service.

    Do you have the number you used? Or any place else that could help?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 48 Answers

If you have the conversion kit for the crib to convert to a toddler bed, you should also have the white caps that go one the end of the guard rails for the toddler bed. I found with mine that they are the same ones as that are on the stationary side of the crib on the back side. if you do not mind having a crib with out a drop side you can remove both tracks and take those pieces and make it a stationary crib by merely following the way the rear side is put together. I have done it with mine as a guide was broken on mine. there should be four caps in the conversion kit that go on the two rails on the front side when you convert to a day bed. I figured out that they are the same as the ones on the back because you do actually use the ones off of the back side when you make it a toddler bed and put all four rail on.

Posted on Sep 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Instructions for Graco 3 in 1 sleep system crib model 8740


Most if not all of the simplicity brand drop-side cribs have been recalled, including the Graco 8740.

Here is the CPSP link reguarding this crib:
http://www.cpsc.gov/CPSCPUB/PREREL/prhtml09/09260list.html
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

According to the CPSP information the company appears to be out of business to some degree and are not providing repair kits.

If you know where you purchased the crib, check to see what their policy is reguarding recalled baby products.

We had purchased ours at walmart almost 8 years ago and were able to return it to another store in a different state for a full refund last summer. They did not need a reciept received, they just needed the manufacturer label on the part that the mattress lies on.

Because ours was older, the customer service clerk did have to work hard to find the crib in their system, but once she did, it was not problem at all.

Toddler conversion on at least some of the cribs is simply to remove the front dropside from the crip (you may want or need to unscreen the dropside tracks to remove the actual side) Then screw the toddler rails to the front side of the crip. There should be pre-drilled holes for the toddler rails, if there are not then you may have the mattress support on backwards.

Jun 08, 2009 | Graco Apsen 3-in-1 8740 Crib

1 Answer

I need a part for a crib


Please read this, I'm not sure if yours is included because looks like you listed it as 'ultra deluxe' but better to be safe than sorry...

About 1 Million Simplicity Cribs Recalled Due To Failures Resulting in Infant Deaths NOTE: Repair Kits that immobilize the drop-side are now available
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall. AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued. WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs. CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up. The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped. CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure. The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio. The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996. The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300. As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.

Here's the site...
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

Please be safe.

Jan 28, 2009 | Graco Ultra Deluxe 5-in-1 4605 Crib

1 Answer

Upper and lower tracks for crib


contact graco as the crib is recalled, they will send u new ones for free.

Aug 18, 2008 | Graco Ultra Deluxe 5-in-1 4605 Crib

1 Answer

Need insturtions for graco


Most if not all of the simplicity brand drop-side cribs have been recalled, including the Graco model #4600.

Here is the CPSP link regarding this crib.
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07307.html

According to the CPSP information the company appears to be out of business to some degree and are not providing repair kits.

If you know where you purchased the crib, check to see what their policy is regarding recalled baby products.

We had purchased ours at walmart almost 8 years ago and were able to return it to another store in a different state for a full refund last summer. They did not need a receipt received, they just needed the manufacturer label on the part that the mattress lies on.

Because ours was older, the customer service clerk did have to work hard to find the crib in their system, but once she did, it was not problem at all.

Aug 08, 2008 | Graco Apsen 3-in-1 8740 Crib

1 Answer

I need upper track (plastic pieces) for my Graco 4 in 1 Sleep System Model 4600CL. There are two lower track pieces, and two upper track pieces. All I need is ONE of the upper tracks. Please help!


I have a Graco 4 in 1 Ultra Sleep System Model 4600 CL. There is a recall on this model for the track guides breaking. The website is www.simplicityforchildren.com You can get a replacement track system for free and you can also order parts at 1-800-858-8323.

I also have the complete instructions for assembly of the crib, toddler bed and day bed.

Jul 06, 2008 | Graco Ultra Deluxe 5-in-1 4605 Crib

6 Answers

Need parts for white graco metal crib with arched ends


i need to know how to get another round piece that goes into the conversion rails for the toddler bed.

May 06, 2008 | Graco Ultra Deluxe 5-in-1 4605 Crib

1 Answer

I am needing replacement s hooks for a 3 in 1 sleep system. the model number is 8740 and the serial number is 3803. but can not find replacement parts for it. all i need is the s hooks for it.


PLEASE READ THIS WEBSITE INFO ASAP! The model 38740 WAS RECALLED! Please check your serial number with this wepage! http://www.consumeraffairs.com/recalls04/2007/simplicity_cribs2.html

Also, you can call Simplicity Inc, who made this model with Graco at 1-800-858-8323. If your model is not recalled, I'm sure they can instruct you on obtaining a manual and replacement parts! Good luck!! :)

Apr 13, 2008 | Graco Apsen 3-in-1 8740 Crib

4 Answers

Parts List for Graco 3 in 1 crib


do not contact graco do contact simplicity for children as they are the makers of the crib, it merely has the graco name on it. They will be able to help here is their web site http://www.simplicityforchildren.com/

they were able to help me

Oct 19, 2007 | Graco Ultra Deluxe 5-in-1 4605 Crib

2 Answers

CONVERTING TO TODDLER BED


i found this on the simplicity website, hope it helps. i got mine done i minutes!!!!

Remove Drop side.
Lower drop side. Push in on the tabs at the
bottom of both lower tracks to slide the drop
side down off the tracks as shown.
Position Mattress Support.
Mattress support must be in the lowest
position. If not, use the allen wrench to
remove bolts. Lower support into position
and re-attach to headboard.
Remove upper and lower tracks.

Aug 29, 2007 | Simplicity for Children Ellis 4 in 1 Sleep...

Not finding what you are looking for?
Graco Ultra Deluxe 5-in-1 4605 Crib Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

Iron
Iron

Level 3 Expert

3018 Answers

Dennis Crouse

Level 2 Expert

33 Answers

kenneth njonjo

Level 3 Expert

1575 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...