Question about Canon PIXMA MP210 Photo All-In-One Printer
Posted by Anonymous on
IFIs can not determine the remaining amount of ink (set of used or refilled cartridge). Replace the toner cartridge or disable the tracking of ink levels.
To disable tracking of ink levels - press and hold for more than five seconds, the button «Resume / Cancel» (in the user documentation, this button is called the Stop / Reset and is denoted by a triangle in a circle)
Posted on May 24, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The printer needed to be reset.
Unhook the printer then take out the new cartridges.
try to very gently clean the contacts also make sure the contact on the new cartridges is clean.
Let it dry for a few minutes assembly.
Plug it. My printer is reset by pressing the start button and hold it down until it beeps 6 times.
You can check your manual how to reset yours.
I hope it work for you.
Posted on Mar 17, 2009
Tips for a great answer:
Aug 02, 2015 | Canon PIXMA Office Equipment & Supplies
Nov 25, 2011 | Canon Pixma iP2700 InkJet Photo Printer
Replace the ink cartridge and close the Scanning Unit (Printer Cover).
If printing is in progress and you want to continue printing, press the Stop/Reset button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.
The function for detecting the remaining ink level will be disabled.
Replace the empty ink cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition.
Jan 29, 2011 | Canon PIXMA MP210 InkJet Printer
Mar 16, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
651 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: