Question about Proview PL926WBi 19" LCD Monitor

1 Answer

Monater comes on then turns black - Proview PL926WBi 19" LCD Monitor

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Are you going to DIY repair? If you do, then please read on.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for:
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
Failed TV and Monitors pictures:

Learn about bad caps:

Capacitors kit: he can make you a set of caps for you.
Or just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Posted on May 25, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got a 22 inch envision monater that comes on when u cut it on but goes right back out

try separating the wiring. Touching wires cause cross-talk of signals

Feb 06, 2014 | Envision Computers & Internet

1 Answer

I can'tet into my facebook. Help.

Point your web browser at

If another account comes up, log out of it by clicking the little gear icon in the upper-right then clicking "Log Out."

If you then still can't log in to your account, click the "Forgot your password?" link located just below the password box on the login page.

Jan 28, 2014 | Facebook Social Network

1 Answer

My dell monator shows black

take out your memory sticks and put them back in.If you have more than one try one at a time.

Jul 28, 2012 | Acer AspireT135 (AST135US3302) PC Desktop

1 Answer

I installed intel core i5 processor in lenovo s/n es066483168 and the monator will not come on why

Make sure GPU and HDD are in place with all connectors.
If they are you have probably installed the CPU wrong and have bent a few pins, if so get a magnifying glass and try to straighten them.
Have fun :)

Aug 17, 2011 | Lenovo IdeaCentre K320 - 30192OU (Black) -...

1 Answer

Pc turns on beeps 3 times and the monater says no signel

when the PC beeps it means some cables or devices are not installed (or assembled) correctly.
so recommend you to 'remove all the cables and devices (even CPU Fan) and install them again'.
if you need help about assembling the devices only Ask!

Jan 29, 2011 | E-Machines eMachines Desktop PC

1 Answer

Hi i have a acer aspire 5100 when you turn on the laptop thier is not screen at all and if you hook up a diffrent monator thier isnt no picture thier could this be a motherbored issue

Possibly the main board but check the power supply first as if the voltage is too low or the battery is faulty, you will get a similar error.

Oct 16, 2010 | Computers & Internet

1 Answer

Picture stays on black

I had this same exact issue yesterday. I own the same TV model and here is what SONY had me do to get the picture back. Ultimately the picture comes back, but it will be very dim and needs repair. Most likely a power supply issue. Try these steps:

-Press power off or leave with standby light on for 5 minutes (wait the full 5 minutes)
-Unplug TV / Press top buttons 5 times each to remove static from system boards (yes, each button 5 times each)
-Wait one full minute and plug TV in and press power on

Jun 03, 2008 | Sony FWD50PX2/S 50 in. Plasma Television

1 Answer

Copeland A/C compressor Phase monator

Are you good with wiring?? you can use replacement monitors is there a supply house in your area? just purchase replacement ones they have instructions on wiring them up. if you need any more help with the units just email me at

May 04, 2008 | Heating & Cooling

Not finding what you are looking for?
Proview PL926WBi 19" LCD Monitor Logo

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Computers & Internet Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1897 Answers


Level 3 Expert

3960 Answers

Brad Brown

Level 3 Expert

17115 Answers

Are you a Proview Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides