Question about Office Equipment & Supplies

1 Answer

I get this error on the printer screen 'A printer error has occured. Turn off the printer, then press On button to turn on. See your documentation.' However turning off & on doesn't work. If I press any other button (including settings) it just says 'invalid operation'. It's an Epson dx8450.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

1 click the wreck symbol navigate your right arrow and look for factory or default settings

In case nothing happens ]

2; Turn off the printer .Move the cartridge carrier manually with your hands move it from left to right 5x
remove the cartridges all of them

3. clean the cartridges specially the gold and the area where the ink goes out with a clean paper or a dry cloth make sure its clean
- clean also the area where you put in the cartridges

try to turn on the printer make sure to close it properly before you tpo turn it on

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A printer error has occurred. Turn off the printer, then press the on button. Doesn't do anything. How do I fix it?


Unplug from PC make sure your cable is good replying and try again. Check your power cord as well

Apr 07, 2013 | Office Equipment & Supplies

1 Answer

Error SC 55C2


Press clear (yellow button) followed by 1, 0, 7 then hold down the stop (red/orange button) till it enters service mode.

Press on 'Copy SP' then key in '5810' and press '#' and then press on 'excute' to reset the service code.

Then just turn the machine off then on.

If SC542 re-occurs the fuser's thermistor will need a inspection.

Sep 22, 2011 | Ricoh Aficio MP 1600L Black and White...

2 Answers

Error 5200 of canon pixma mx328. i already tried turning it on and off several times and even got the cartridges and returned them back but still when i tried to print a page error 5200 still...


Error no 5200 is caused by its temperature high.. to solve your problem follow the instruction given below::

1. Turn Off printer, cable power still plug in.

2. Press Stop/Reset button, don't release the button.

3. Press Power button by holding without release and than release Stop/Reset Button.

4. Press Stop/Reset button two times (2x) now release the Power Button.

5. Wait until service mode to zero (0).

6. Turn off the Printer, cable power still plug in.

7. Press Stop/Reset button, don't release it.

8. Press Power button don't release & than release Stop/Release button.

9. Press Stop/Reset button four times (4x), wait until service mode to "1"

10. Turn off printer, and loose cable power, wait for one (1) minute.

11. Connect cable power, turn on printer again, now this printer ready to use.

Aug 23, 2011 | Canon MX300 Office All-In-One Printer

1 Answer

When I turn on my brother mfc 8440 I received this message in the screen : Error 6A


To clear the error, the procedure is as follows:
1. Turn off printer
2. Hold down MENU button on front panel and turn on power while continuing to hold.
3. Release button after 5 seconds (after the Please Wait message)
4. If error still occurs:
5. Press 91
6. If error still occurs:
7. Press 99

This should clear the error.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Thanks, Joe

Jul 05, 2011 | Office Equipment & Supplies

1 Answer

BROTHER DCP 8020 ERROR 6A


A Brother MFC-8840D reported an Error 6A on the panel after a short power-outage that occurred. Calling Brother indicated that the error reflects that.

To clear the error, the procedure is as follows:
1. Turn off printer
2. Hold down MENU button on front panel and turn on power while continuing to hold.
3. Release button after 5 seconds (after the Please Wait message)
4. If error still occurs:
5. Press 91
6. If error still occurs:
7. Press 99

This should clear the error.

Good luck

Please rate FIXYA

Apr 07, 2011 | Brother DCP-8020 Laser Printer

2 Answers

Code ereur 59


A code error 59:

Description A printer motor error has occurred. This message might also appear if the ETB is missing or incorrectly installed. Ensure that the ETB is installed correctly. Action
  1. Press the green c00099346.jpg (Select) button to continue.
  2. Turn the printer off, and then turn the printer on.
  3. If the error message returns, turn the printer off.
  4. Perform a cold reset.
    1. Turn the printer on.
    2. Watch the control panel.
    3. When the memory starts counting, press and hold the green c00099346.jpg (Select) button.
    4. Continue holding the green c00099346.jpg (Select) button until the Ready, Data, and Attention lights flash once, and then stay on steady.
    5. Release the check button when the Ready, Data, and Attention light are on steady. The control panel will display SELECT LANGUAGE.
    6. Press c00099347.jpg (Down Arrow) button once. The control panel will display COLD RESET.
    7. Press c00099346.jpg (Select). The printer will perform a cold reset and then continue its power-on sequence.
  5. If this message persists, contact an HP-authorized service or support provider.

Mar 02, 2011 | HP LaserJet 5550DN Printer

1 Answer

Printer repair brother mfc 8840dn



To Clear the error follow the procedure

1:) Turn Off the printer

2:) Hold down the menu option on the front panel and turn on the power while the menu button is still pressed

3:) Release button after 5 seconds (after the Please Wait message)

4:) If error still occurs Press 91

5:) If it still ocurs press 99

This should clear the error.

May 07, 2010 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...