Question about Garden

1 Answer

Not cutting and burning the wood - was working perfectly last time I used it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Did you change the Blade? Make sure the chain is on the right way, teeth on top point away, teeth on bottom point toward you.

Posted on May 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which type of roof is perfect for big house?


tiles blow off. wood tiles burn.clay/cement tiles crack so that just about leaves tin /steel cladding for a long lasting roof

Jul 12, 2016 | Tools & Hardware - Others

Tip

My Blue Laser


Ever wish you could make that perfect cut the first time with your miter saw or table saw ? Simple if you put a strip of wide blue tape on base of saw and cut the tape with your saw ! Now you know where the blade will cut, now mark your wood, move the wood and the pencil mark to edge of tape that you just cut and cut it. That simple and easy to calibrate verses the red lasers that come on some saws that to me never work right to begin with.
Valley2118

on Feb 19, 2010 | Saws

Tip

Install Wood Stove Save Money on Heating


Fuel oil prices have been very volatile over the past few years. The price of electricity has increased dramatically for some areas recently and it will increase for many other areas in the near future. LP gas or Propane has jumped around with the changes in the oil pricing. The prices of natural gas have been fairly stable recently, but as fuel oil and electricity rise in cost the natural gas prices will follow as more and more large use customers convert to it to save money.


Even though the costs of many other home heating fuels has continued to rise the price of wood has stayed the same or even become lower. If you have easy access to this cheap fuel then you may want to consider burning wood as the way to heat your home.

The one fuel that has remained stable or dropped in price has been firewood. Because of the slowdown in the housing market many loggers that have been very busy for years cutting for lumber mills, now have time on their hands and are cutting firewood for some side money to survive and to just stay busy. Many timber stands that were under contract to be harvested are still standing because they are not worth cutting. All this means that if you are thinking about burning wood to heat your home, then now is the time to do it.

Check out the many possibilities that are available to use to heat your home comfortably and effectively. There are many ways that you can use to burn wood and heat easily and efficiently. Each home and situation is different. Make sure that you get the right wood burning appliance for your home.
http://www.fixya.com/support/r3595905-alternative_heating_pellet_stoves_and_pe

on Dec 24, 2009 | Heating & Cooling

1 Answer

How do I keep the seal in place on the door of the century wood burning stove.


Go to the local hardware, Lowe's or Home Depot and look for a product called "Gasketing Cement and Stove Sealer". Meeco's Red Devil is one manufacturer of the product. It withstands temps up to 2000 degrees. Cut the tip and run a moderate sized bead in the groove of the door or the front of the stove. Place the pre-cut NEW non-asbestos gasket in place and tamp it in lightly with your fingers. Then close the door to mold the gasket to the surface and don't disturb it until the sealant cures....ususally onernight or a full day while you are at work. Do not have a fire in the stove at the time.

Nov 22, 2014 | Century Heating The WHISTLER Wood-Burning...

1 Answer

Dose not cut in a straight line wonders


First question: What are you cutting? Are you cutting wood? If you're using fence, I need you to make adjustments on it . The nature of the band saw is to drift either left or right being parallel with the band saw fence. Is the blade tension too tight or insufficient? Check your manual for correct tension or you can just see in the tension gauge on your saw. Please this blog on how to check the correct blade tension . What is your feed and speed rate? Make sure the you're not feeding the wood too slow or too fast. Are you using new blade? Your blade is may be dull or low quality. I purchased my blades on www.sawblade.com . Their Haltbar 201 Series works great on general wood cutting.
Last question, have you taken up time to tune up your saw? See this blog for your reference.

Sep 11, 2013 | Craftsman Saws

1 Answer

New Homelite. Cut great for an hour, then the chain wouldn't grip or cut. Chain was loose so I tightened but still doesn't cut- just


The blade is no longer sharp, something not unusual after about an hour of cutting. How long a blade stays sharp depends on what type of wood you're cutting, whether the blade contacted the ground or anything other than wood at any time, and how hard you are working the bar through the wood. If you are cutting hardwood or something like railroad ties the lifespan of the blade is greatly reduced. You can easily sharpen the blade with a hand file or dremel tool with a chain saw blade kit on it or have the blade sharpened. Best practice is to have one or two extra blades so you can change them as they become dull.

Mar 29, 2012 | Homelite Garden

1 Answer

Wood feels like its "pinching" between blad and fence


Possibly the problem is the wood itself. If it is burning both sides of the kerf then it is probably that your kiln dried wood is picking up moisture on the outside from the environment which causes it to bow inwards as it passes the saw. I have even had this problem with plywood. Just keeping timber in an unheated workshop for a while can cause the problem but after a few months it should equalize and the problem disappear at about 15% moisture content. (kiln dried timber should be nearer 10%)
Cut part way along a plank and then mesure the kerf at the end of the plank and at the front of the cut. if it is significantly narrower at the plank end then that is your problem.
These hard woods you mention are always a problem to cut on domestic saws at usually a maximum of 2000 watts . I use a 4500 watt motor in my saw and it will still complain at dry oak, ash and maple etc. especially if they are moving a bit as I cut them. Before I retired I had a panel saw half as powerful again as that and still those hard woods could cause trouble.

Jun 01, 2010 | Craftsman 10" Table Saw

1 Answer

How to cut a 45 degree angle on wood using a jig saw


use a combination sliding square to mark ecxactly where you want to cut. Measure the distance from the jig-saw blade to the edge of the jig-saw bottom plate. Use this distance to mark another line parralel to the first line. Nail or screew a straight piece of wood on the second line. Put the jig-saw plate against the wood fence and cut your perfect line.

Mar 17, 2010 | Franke EuroPro Series GN1845SP Solid Wood...

1 Answer

Jig Saws Blades Types


High Speed Steel - Used for wood and light metal cutting Bi-Metal - Also used for wood and light metal cutting. Cobalt Steel - Tougher and lasts longer than Speed steel and Bi-Metal. Used for wood and metal. Carbide Grit - Strictly used to cut masonry board. Scrolling - Thinner than the regular jig saw blades and are used for tight turning cuts.

Aug 27, 2008 | Milwaukee Tool Milwaukee Orbital Jig Saw...

Not finding what you are looking for?
Garden Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

11122 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...