Area codes for heidelberg, germany - Cell Phones

ENTERING SECURITY CODE

Most vehicles are equipped with Heidelberg V or VI radios that are equipped with a theft protection program. When the battery has been is disconnected or if the radio has been removed, the radio will lock-up electronically and cannot be operated until the security code is entered. On the Heidelberg V, if the proper code is not entered in six attempts, the radio will lock-up permanently and cannot be repaired. On the Heidelberg VI, two incorrect attempts will lock the radio for about 1 hour.
The Heidelberg V may have a code assigned at the factory or a personal code created by the owner. The Hiedelberg VI has a code assigned at the factory and entered by the dealer during pre-delivery inspection. New radios come with the code printed on a sticker but not entered into memory. All codes are 4 digits. To code the radio:
Heidelberg V

1. Turn the radio ON . The radio should display the word SAF. DO NOT attempt to eject a cassette with the radio in this mode.
2. Push the AM/FM and SCAN buttons at the same time and hold them until the display changes, then release them immediately. The number 1000 will appear for about 3 seconds, then the display will go blank. Release the buttons then.

NOTE If the buttons are held too long, the radio will interpret this as an attempt to enter an incorrect code.

1. Use the first four station selector buttons to enter the code. The first digit of the code is always 1. Each time the other buttons are pushed, the number in that position will change.
2. When the code appears correctly in the display, push the AM/FM and SCAN buttons at the same time. When the radio plays and displays a frequency, release the buttons.
3. If the code was entered incorrectly three times, momentarily disconnect the battery and try again. If the code is entered incorrectly three more times, the radio cannot be coded and cannot be repaired.

Heidelberg VI

1. Turn the radio ON . The radio should display the word SAF. DO NOT attempt to eject a cassette with the radio in this mode.
2. Push the AM/FM and SCAN buttons at the same time and hold them until the display changes, then release them immediately. The number 1000 will appear and remain in the display.

NOTE If the buttons are held too long, the radio will interpret this as an attempt to enter an incorrect code.

1. Use the first four station selector buttons to enter the code. Each time a button is pushed, the number in that position will change.
2. When the code appears correctly in the display, push the AM/FM and SCAN buttons at the same time. When SAF appears in the display, release the buttons. The radio should play and display a frequency.
3. If the code was entered incorrectly two times, leave the radio ON for one hour and try again. This can be repeated as often as required.

011 + 49 + area code + phone number

code is 2673

driver scanner driver 4100 umax astra

That normally means that it requires the  security code to be entered.

Disconnect the fuse for 10 minutes, replace then enter the code.

If you do not have the code then the radio will have to be removed from the dashboard and quote all the letters+numbers on any labels, barcodes or stamped in the metal casing.

Also quote the make of car it is fitted into.

I have a Printer problem - "Ink System Failure" - Ink System has failed. Unable to copy, receive faxes, or print. Refer to printer documentation. Error: 0xc18a001". This is what the glass on the left side says. I don't use faxes, so don't care of that. My Son installed an ink system, which of course is a lot cheaper to use, quite some time ago which has been working super. Yesterday the "Ink System Failure" sign came on and my Son was here this morning, but couldn't figure out what is wrong with the printer. I am in Heidelberg, Germany and buy my equipment in the AAFES PX. There is no HP technical service available to us Military people. The Germans won't work on American goods. Is there any hope for me? Thank you.
Phil Gatchell
P.S. I am the Adjutant/Finance Officer of an American Legion Post in Heidelberg and use my color printer extensively. So I am in a bind.

It sounds like you may need to track a replacement through the European Toyota outlets, but try the factory here first. Wow shipping a car from Germany...maybe you can afford a factory replacement softtop. I posted some other solutions if you are on a budget or have time and effort to create a solution.

Hi - You need to install a driver for XP, you can find it on the following link:

Heidelberg 2650 Linoscan

Good Luck!

http://www.open.org/~lemire/home%20page/carradiodecode.html

hope this will help